Results 1 to 8 of 8
  1. #1
    Join Date
    Jan 2015
    Location
    Minnesota
    Posts
    172
    Downloads
    0
    Uploads
    0

    Midwest Ind Gen 3 Handguard Installation Video

    Hello Everyone,

    We received some Gen 3 hand guards from the awesome folks at Midwest Industries for a review. Sneak peak, they are awesome. Before we publish our review we filmed and produced an instruction installation video. Installation is easy and this video is more aimed at an online course versus a quick down and dirty throw this together.

    Hope this can be a reference for folks.
    Thanks!
    Dave


  2. #2
    Join Date
    Apr 2009
    Location
    Central Florida - Gulf Side
    Posts
    1,984
    Downloads
    2
    Uploads
    2
    Dave, not sure if the problem is on my end or not, but the video ran 15 seconds and stopped at the screen shown in the link.
    NRA Benefactor Member
    NRA Certified Instructor

    "I won't be wronged, I won't be insulted, and I won't be laid a hand on."
    John Wayne - "The Shootist"

  3. #3
    Join Date
    Sep 2015
    Location
    OKC
    Posts
    458
    Downloads
    5
    Uploads
    1
    Quote Originally Posted by Jerry R View Post
    Dave, not sure if the problem is on my end or not, but the video ran 15 seconds and stopped at the screen shown in the link.
    Firefox appears to be having a problem with playback of the embedded video source. Chrome, IE, Edge are working. Something full30 is going to need to look at. Sending a note to the guys over there to let them know of the problem.

  4. #4
    Join Date
    Apr 2009
    Location
    Central Florida - Gulf Side
    Posts
    1,984
    Downloads
    2
    Uploads
    2
    I tried it on IE and the 15 second video is their ad. After the ad plays the video starts properly on IE.

    Oh, and very nicely done Dave - Thanks !
    NRA Benefactor Member
    NRA Certified Instructor

    "I won't be wronged, I won't be insulted, and I won't be laid a hand on."
    John Wayne - "The Shootist"

  5. #5
    Join Date
    Jan 2015
    Location
    Minnesota
    Posts
    172
    Downloads
    0
    Uploads
    0
    Thanks for letting them know. I know they upgraded their player recently not sure if that changed embedding code etc. in the future I'll be using YouTube more often.

  6. #6
    Join Date
    Sep 2010
    Location
    PNW
    Posts
    14,424
    Downloads
    0
    Uploads
    0
    Nice video Dave. Is that green block for gas blocks only? I haven't seen it before. I only have the orange one from Brownells for FSB's. I'll have to go look.

  7. #7
    Join Date
    Jan 2015
    Location
    Minnesota
    Posts
    172
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by UWone77 View Post
    Nice video Dave. Is that green block for gas blocks only? I haven't seen it before. I only have the orange one from Brownells for FSB's. I'll have to go look.
    It is the bench block from Brownells, not just for gas blocks. I use it quite often for various jobs and certainly isn't limited to gas blocks. It's a great tool to have around for pin work, as a brace, or just to hold round stuff. I've had it for years and it holds up great, I use the FSB block too and it makes that Jon so much easier.

  8. #8
    Join Date
    Jan 2015
    Location
    Minnesota
    Posts
    172
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by Jerry R View Post
    I tried it on IE and the 15 second video is their ad. After the ad plays the video starts properly on IE.

    Oh, and very nicely done Dave - Thanks !
    Thanks Jerry!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •