Results 1 to 15 of 17
-
25 June 2016, 16:40 #1
9mm lower bolt catch has me flummoxed
My stripped PSA 9mm lower came with the bolt catch roll pin all the way in. (See photo from site) Any ideas how I am supposed to get it out enough to install the bolt catch assembly? The forward hole dead ends so I can"t just punch it out. Too snug for needlenose to slide out. And it doesn't look to be a screw out type that I can tell. Smaller than my tiniest allen wrench.
Just emailed PSA, but I'm irked having to wait for reg business hours. Especially if the solution is something simple my old noodle just can't process.
The two screws forward have no connection to bolt catch.
“ When I comes to modern politics, I think the inverse of Hanlon's Razor applies...In other words, "Never attribute to stupidity that which is adequately explained by malice." - Kerplode
-
25 June 2016, 16:51 #2
9mm lower bolt catch has me flummoxed
It's an Allen screw that you back out just like most billet style AR-15's.
Edit: pic of my JBO for reference.
Sent from my iPhone using TapatalkLast edited by Dstrbdmedic167; 25 June 2016 at 16:55.
-
25 June 2016, 17:30 #3
Guess you can tell all my other lowers are forged. Thanks. I'll have to get some smaller allens.
“ When I comes to modern politics, I think the inverse of Hanlon's Razor applies...In other words, "Never attribute to stupidity that which is adequately explained by malice." - Kerplode
-
25 June 2016, 18:38 #4
no worries glad to help. get some itty bitty allen wrenches and you'll be GTG
-
26 June 2016, 13:17 #5
Am I a bad person for LOL'ing at this?
-
26 June 2016, 13:29 #6
I'm sure you are not alone, Stick.. I'm laughing at my pathetic self. After beaucoup lowers I assumed I knew it all. I just now screwed in the catch and on to the next stump-the-Phil billet mystery. Next up: An SBR forged lower to regain some self respect.
“ When I comes to modern politics, I think the inverse of Hanlon's Razor applies...In other words, "Never attribute to stupidity that which is adequately explained by malice." - Kerplode
-
26 June 2016, 15:25 #7
-
26 June 2016, 16:17 #8
The threaded bolt catch pin is a very polarizing subject on the interwebs. I for one think all the threaded pins are a great innovation. Others feel it upsets the earth's magnetic field, in addition to making your rifle explode in a shower of failed parts. Enjoy the revelation and fewer scratches!
There's no "Team" in F**K YOU!
-
26 June 2016, 17:56 #9
Well, it's finally finished. Definitely not a fun build like the dozen or so others I've done. I do like the screwed bolt catch pin, but not sure on the captured saftey detent/spring. Does not help having to wrangle the operation in my lap cuz no 9mm vise block. The free range carpet detent herd is larger now. It's a well balanced gun a little on the heavy side due to the porcine BCG and 8.5 oz buffer. 6lbs 13 with no sights.
The QC on the lower is second rate. I had to chip out metal flashing in a takedown hole and the grip detent hole was completely closed. Just a couple minutes with a punch and round file to fix, bit still. The biggest dissapointment is not a PSA fault. While the factory Glock and Magpul mags drop free, the ETS only do so empty. Loaded, the body swells so much that some I can't fully seat at all and those that do insert I have to wedge the gun muzzle down against my leg to pry them out. I can see the scrape marks in the mag well, but not sure if I want to dremel away and chance the other mags getting loose. Five 31 mags wasted if I don't though. The same ETS mags work fine in my 2 G19s. I do love the 22 rounders.“ When I comes to modern politics, I think the inverse of Hanlon's Razor applies...In other words, "Never attribute to stupidity that which is adequately explained by malice." - Kerplode
-
26 June 2016, 18:11 #10
-
26 June 2016, 19:03 #11
Update: With 29 rounds the ETS 31s no longer bind. I can live wirh that. Now I see that I can't lock the bolt open manually. The bcg pulls back a good 1/8-1/4" too little for the bolt catch to catch. Another new one on me.
“ When I comes to modern politics, I think the inverse of Hanlon's Razor applies...In other words, "Never attribute to stupidity that which is adequately explained by malice." - Kerplode
-
26 June 2016, 19:10 #12
-
26 June 2016, 22:11 #13
-
27 June 2016, 06:39 #14
Hey, it was dark out and I was sick of dealing with it. New morning and It's all good. Well, almost all. Notice my one last problem?
The Comp M3 is old and hack-painted, but still too good for a pistol cal toy. Will replace with a PA dot when I find it. Spare Troy BUIS. ACT trigger that feels smooth. May pop in some JP springs for a 4.5 lb pull later. Green Magpul is not my fave, but it's gotta go somewhere and will make easy to ID in the sock burqa.
I hear the blowback has a bit of a kick so may get the cheap PSA brake if needed. Still not sure if an EP buffer spring will be needed.
“ When I comes to modern politics, I think the inverse of Hanlon's Razor applies...In other words, "Never attribute to stupidity that which is adequately explained by malice." - Kerplode
-
27 June 2016, 19:01 #15
Managed to get a few toes into the picture!