Project Eva

[fledge]

The dust cover was a good try. If you want a pic of a V7 on that upper let me know.

But are you sure you want that grip?? :/

(And why can't rainier move that logo on the front of the magwell to the right magwell and delete the billboard "rainier arms"?)

[Aragorn]

Think I saw a pic of your Bootleg upper with the V7, but yeah, feel free to post another as a refresher. I've got a couple already in use, they're alright. They look nice but are expensive and don't know how well they'd go with the upper. Had high hopes for the SI.

As for the grip, won't know until I shoot it. I've had it laying around for years but all my other lowers are billet so I couldn't use it. When I did recently throw it on a forged lower just to finger-bang, I freaking loved the finger placement it gave me on the flat-bowed Geissele. So, we'll see. It is a bit unusual to look at at first.

[Former11B]

Yeah please don't use that grip

[Stickman]

I thought the Stark grip was only for people who broke off the ears on the lower.

[Pyzik]

Got a SI Ultimate Dust Cover. I really like it, but turns out it won't find a home on my Bootleg upper. Doesn't seem to seal well, even with the detent tightened way up. Also doesn't open fully. It'll clear the port plenty, but then stops before actually impacting the lower just due to where material meets on the Bootleg and SI UDC.

Attachment 1548

Attachment 1549

Attachment 1551

Attachment 1552

Attachment 1553

Did you get the enhanced? That could be the issue. I read that the enhanced was designed for billet uppers.

That lower is sexy. Wish I could have gotten one.

[Aragorn]

But are you sure you want that grip?? :/

Yeah please don't use that grip

I thought the Stark grip was only for people who broke off the ears on the lower.

Alright... Found a better grip for you guys...






Hey, I know of at least ONE other member here who will like it!

Did you get the enhanced? That could be the issue. I read that the enhanced was designed for billet uppers.

That lower is sexy. Wish I could have gotten one.

Not sure. Box doesn't say enhanced, but it does have the "L" shaped spring and the window cutout...

[Pyzik]

Alright... Found a better grip for you guys...






Hey, I know of at least ONE other member here who will like it!




Not sure. Box doesn't say enhanced, but it does have the "L" shaped spring and the window cutout...

Pretty certain mine said enhanced. Not Sure if the spring is the indicator or what

Sent from my SM-N910V using Tapatalk

[Jerry R]

Alright... Found a better grip for you guys...

Hey, I know of at least ONE other member here who will like it!

YES He Does !!!

[fledge]

Alright... Found a better grip for you guys...

Sadly, that is an improvement.

[n4p226r]

I think my buddy waited 2 years for his billet umbrella lower. How was the wait for yours?

Got a SI Ultimate Dust Cover. I really like it, but turns out it won't find a home on my Bootleg upper. Doesn't seem to seal well, even with the detent tightened way up. Also doesn't open fully. It'll clear the port plenty, but then stops before actually impacting the lower just due to where material meets on the Bootleg and SI UDC.

Attachment 1548

Attachment 1549

Attachment 1551

Attachment 1552

Attachment 1553

[UWone77]

I think my buddy waited 2 years for his billet umbrella lower. How was the wait for yours?

Someone say Umbrella Lower?

[Aragorn]

Making some progress, kinda taking my time so as not to burn the wallet TOO much. Got the PWS Gen. 2 buffer tube and ratchet lock system. Novel. I'll admit I've never personally staked a castle nut so this isn't a bad alternative. BAD EPS installed. Also my V7 dust cover was slightly loose on my 17" so I pulled it off and stuck it on here. The 17" got the SI which tightened down nicely.

[fledge]

Got the PWS Gen. 2 buffer tube and ratchet lock system. Novel. I'll admit I've never personally staked a castle nut so this isn't a bad alternative. BAD EPS installed. Also my V7 dust cover was slightly loose on my 17" so I pulled it off and stuck it on here.

Nice choice on the dust cover. Keeps the upper from getting too complicated, IMO.

I like the gen 2 RE and wish they sold it separately.

[UWone77]

You should get it all cerakoted. Seems like several shades of black/gray between the receivers and extension.

[Aragorn]

You should get it all cerakoted. Seems like several shades of black/gray between the receivers and extension.

Yeah, Rainier's lower is ultra black, while the Bootleg upper and PWS buffer tube match the Aero receivers I have laying around. I've though about cerakote, but the lasering is so phenomenal and fine on the lower that I'm concerned some of the finer nuances (eyelashes, for instance) would be filled in.