Results 61 to 75 of 102
Thread: Project Eva
-
26 September 2016, 13:37 #61
Project Eva
UW, I only need the V7 stripped upper receiver and my build is under way (14.5").
Aragorn, I think the bootleg has a place. It's better looking than the BAD upper (I had two of those and sold them cause they just are weird). But outside the bootleg picmod rail, the Night rail is the closest thing I've found that looks good. And the Night is its own polarizing design.
The fortis upper is nice, by the way. Looks good on a BAD lower too.
I'm not sure the Cerakote color black used on the AXTS. It's just listed as "black" on their site. It's similar to annodizing color. It's not like the Teflon appearance of the Noveske sets these days.Last edited by fledge; 26 September 2016 at 13:43.
-
26 September 2016, 13:43 #62
Personally, I wouldn't care about the color difference too much. A few range sessions and throwing it in some dirt will make it right as rain.
fledge, I've been eye balling a V7 Billet Set with the handguards & barrel... but of course I need another AR like I need a hole in my head. Definitely curious to see yours when it's done.
Haven't built up anything AR wise in awhile, so I'm hoping to keep it that way till at least next year. I've got a couple of projects that I'd stalled on just because I don't feel like buying the parts.
-
26 September 2016, 13:44 #63
I was actually looking through my gallery, as well as the AR pic thread on here, and also took note of the Fortis. Maybe that's what I need for my engraved lower, or simply just a Rainier forged upper...
Then just let the Bootleg sit. Or sell it.-One Nation, Under God
-"The bad news is time flies. The good news is you're the pilot." ~ Michael Althsuler
-
26 September 2016, 13:48 #64
It's more than just color. Lines don't match well where the B-Pillar/Fence just ends abruptly with pretty much any lower. Perhaps even more so is the widened barrel nut interface. Rules out a lot of forend, and doesn't see, to match well with some of the ones that do fit. The exceptions being the Nightrail and of course Bootlegs own forend.
-One Nation, Under God
-"The bad news is time flies. The good news is you're the pilot." ~ Michael Althsuler
-
26 September 2016, 13:50 #65
UW, it's on my plate next. I'll update the thread when I get it assembled... And then pinned. I am doing the V7 to replace the 2a Balios I sold (hated trigger guard cuts) as the "lightweight build." It'll be a good one to get my wife interested in rifles.
Just saw that Bootleg is now on Gunstruction. Now you can pair it with a lot of awful options, Aragorn. Haha
-
26 September 2016, 13:58 #66
Fledge, you wouldn't happen to have a San Tan upper to take a pic with a standard forged lower would you? Since I now seem to be entertaining the ideas of replacing the upper..
ETA: Or a Fortis for that matter?-One Nation, Under God
-"The bad news is time flies. The good news is you're the pilot." ~ Michael Althsuler
-
26 September 2016, 14:19 #67
I can do both. I'll try to get to it tonight.
-
26 September 2016, 15:06 #68
-
26 September 2016, 15:08 #69
-
26 September 2016, 18:04 #70
The black Cerakote used by Noveske is Armor Black. I can't speak for AXTS but the black that a lot of other manufacturers use is Graphite Black. Graphite Black is more black, while Armor Black is slightly grayish or Teflon in appearance as you mentioned. Graphite Black is a real close match to the anodizing of the Battle Arms forged lowers or Rainier gen 2 uppers, hope that helps.
-
26 September 2016, 21:42 #71
-
26 September 2016, 21:46 #72
-
26 September 2016, 21:55 #73
The Fortis looks really good. Lines match up perfectly on both sides. Hmmmm may have to do that... If I can find one in stock.
-One Nation, Under God
-"The bad news is time flies. The good news is you're the pilot." ~ Michael Althsuler
-
26 September 2016, 22:23 #74
I was going to mention that but didn't want to persuade you. :)
It's a solid upper. It has styling with restraint. The trick like always is matching a rail. I'm waiting for the fortis 10" night rail to be released (soon!) as this will be on a BAD SBR.
-
26 September 2016, 22:32 #75
I don't really think it would do badly with a KMR-A. It doesn't have the giant barrel nut interface like the Bootleg.
Can't think of a reason it would have bad flow. Really, the Bootleg is the only upper I've seen that makes a KMR look out of place.-One Nation, Under God
-"The bad news is time flies. The good news is you're the pilot." ~ Michael Althsuler