Cross Machine Tool Combat Recoil Compensator

[UWone77]

These will be available in Nitride, Stainless Steel, and eventually Grade 5 Titanium

https://www.cmttac.com/index.php?rou...product_id=153


The Cross Machine Tool CRC 556 (Combat Recoil Compensator) is a Hybrid muzzle device.

Two forward angle brake ports on the CRC 556 provide greatly reduced muzzle rise & mitigate felt recoil while the front forks distort and reduce flash signature. The external machined flutes on the front flash forks not only reduce the overall weight of the device but also blend with the aesthetic appearance of our Trademark magwell grooves on CMT UHP15 series Lower receivers. Function of the CRC 556 muzzle device is equaled by the exceptional visible manufacturing quality & apprearence you expect from Cross Machine Tool products. MADE IN USA

Must select finish- "Available option" to order- if the option you want isn't selectable in the option menu, that option is out of stock currently. !! LIMITED TIME INTRO PRICING!!

FEATURES-

Manufactured from Stainless Steel (standard- G5 Titanium available)
Standard-QPQ Nitride finished for durability & corrsion protection-standard (raw SS & TI mat/finish available)
1/2 28 RH ID threads
.632" max diameter
Surface Hardness-68RC Substrate Hardness-30 RC (QPQ SS only)
Weight- 2.7oz. SS model 1.5oz. Grade 5 Titanium model
Caliber- 5.56mm / .223 Remington only
Rating- Full Auto
Zero porting on bottom side to reduce ground signature when fired from the prone position
Zero porting on the center top side to reduce flash sight obstruction through optics/sights
2 forward angled progressive side exhaust chambers
Outer tang styling cuts to match Trademark magwell grooves on UHP15 series lower receivers
Pre-drilled for pinning to 14.5" barrel to legal length (pin included)
Crush washer included (not for suppressor use)
Made in the USA

[Joelski]

Sure looks like every brake I've ever seen. What makes it a comp?

[SINNER]

Technically the 6 ports on top. Like 99% of the devices this is what I would consider a hybrid. Part brake, part compensator.

[UWone77]

Only so many ways to design a 2/3 port brake. Like SINNER said, the ports on the top make it a comp.

[mustangfreek]

Looks like a dragon/epsilon hybrid..

[UWone77]

Looks like a dragon/epsilon hybrid..

Yeah, I was thinking the same.

They're also working on a flash comp as well. This is prototype. It will likely go through several more revisions:

[Duffy]

Add another port and it'd look like the old Warner Bros company logo

[Pyzik]

I like the flash comp.

[mustangfreek]

What's the flash Comp look like?

Though this is $63 bux at the moment so not a bad price

[SINNER]

What's the flash Comp look like?

Though this is $63 bux at the moment so not a bad price

Yeah, I was thinking the same.

They're also working on a flash comp as well. This is prototype. It will likely go through several more revisions:

[Joelski]

The flash comp looks familiar, although there's probably only so much you do. I know, call it a flash brake!

6 holes on top of that brake seems like it would compensate like that girl everybody knew in high school.

[Pyzik]

Hmm. I like it.


CMT CRC 556 (3) by Damage Photos, on Flickr

[Dstrbdmedic167]

Hmm. I like it.


CMT CRC 556 (3) by Damage Photos, on Flickr

Nice!

[UWone77]

Hmm. I like it.


CMT CRC 556 (3) by Damage Photos, on Flickr

I think the nitride version looks a lot better than the raw SS.

[alamo5000]

I think the nitride version looks a lot better than the raw SS.

Agreed 100%