Results 1 to 11 of 11
-
19 November 2016, 14:26 #1Senior Member
- Join Date
- May 2013
- Posts
- 820
- Downloads
- 0
- Uploads
- 0
13.7" barrel with pinned BE Meyers FH
Anybody running this setup? It looks as though it might not make a 13.7" barrel to 16" by just a bit. Has anybody done this? How did it turn out?
Thinking about doing this but want to confirm a 16" OAL.
Are there any other long flash hiders that might work?
Going to use this on my WEVO cerakote that Axlnt did for me.
-
19 November 2016, 14:34 #2
BE Meyers or a Noveske KX5 both take a 13.7" to 16.1. I'm sure I've heard of others but I just can't recall. Maybe one of the Surefire's
-
19 November 2016, 14:39 #3
13.7" barrel with pinned BE Meyers FH
M4C has an active thread in this at the moment.
Some Meyers devices work. The ASR version is too short for 13.7 (but will work on 14" barrel). The saker version will work on 13.7. Weapon Outfitters includes in the description that it works when used with the washer.
http://www.weaponoutfitters.com/b-e-...ider-5-56.html
-
19 November 2016, 15:25 #4
I only know that the 249F works for sure.
I don't like having to use shims to get to the legal length.
-
19 November 2016, 15:45 #5
What is the advantage of trading barrel (and presumably, velocity) for a muzzle device? I got the 14.5"/permanently attached device as most of them are 1.5" easily, but I don't understand giving up the velocity for the same barrel swing?
There's no "Team" in F**K YOU!
-
19 November 2016, 15:54 #6
-
19 November 2016, 16:33 #7Senior Member
- Join Date
- May 2013
- Posts
- 820
- Downloads
- 0
- Uploads
- 0
-
19 November 2016, 18:37 #8
Just put it on a SBR
-
27 November 2016, 15:51 #9
I run that setup with the saker mounts. You must use the precision shims to make length. I got mine from weapon outfitters. Give me a sec to get a photo of my builds. I have 2 setup with 13.7" barrels and be meyers
-
27 November 2016, 16:00 #10
Please excuse the Californiaication. The one in top has this guy on it.
http://www.weaponoutfitters.com/b-e-...ider-5-56.html
I'm running this barrel
http://www.weaponoutfitters.com/weap...ngth-5-56.html
Due to law changes I may have to sell it though. The barrel unless I can find a surefire socom. That is supposed to make length as well.
-
7 January 2017, 23:20 #11
BE Meyers Solid Washer can also bring other BE Meyers ASR/Trifect Mounts up to the legal length on a 13.7"
http://www.weaponoutfitters.com/rifl...id-washer.html