Results 1 to 15 of 70
Thread: EMR-A
Threaded View
-
13 April 2017, 08:32 #11
EMR-A extended reach lever on top, standard lever on bottom. Extended reach lever is shy of 0.1 inch longer than the standard lever, just that 0.1 inch makes it easier to press.
I didn't take this pic, it's good enough from the shop floor
Note the portion with the V shaped relief, this area is immediately below a bolt catch's lower paddle, and is of lower profile than the serrated portion of the EMR-A lever. We wanted the area below the bolt catch's lower paddle to be as low and clear of clutter as possible, this happens to be the same area that creates interference and makes a standard bolt catch's lower paddle difficult to access.
In this picture, we show the ABC/R v2 (with thinner and tapered upper paddle, and no lightening cuts) and the EMR-A. Notice the area below the ABC/R v2's lower paddle, compared to the original ABC/R with a Norgon Ambi-Catch.
Last edited by Duffy; 13 April 2017 at 08:44.