I just got issued a new rifle at work.

[Calico Jack]

Calico,

Unless you have clearance issues, you can remove the Picatinny rail from the Gear Sector mount, and then the Picatinny clamp from your Streamlight RM2, and direct mount the light body to the Gear Sector. Will knock a fair bit off the vertical profile. :)

Jason does use red loctite on the screws for the Picatinny rail, though. I had to drill them out on mine.

Nice rifle!

Yeah I am going to have to figure something else out. I like the 2 o clock mount vs the 3 o clock mount. That setup was great on my 6920 with Colt FSB. This set up works but is less than ideal.

[Former11B]

Daaaaaaaang department budget must be looking good! Civil Asset Forfeiture purchase?

[Calico Jack]

Daaaaaaaang department budget must be looking good! Civil Asset Forfeiture purchase?

No my department and state is actually pretty strict in regards to asset forfeiture. Grants and budget rangling.

[Former11B]

No my department and state is actually pretty strict in regards to asset forfeiture. Grants and budget rangling.

I was just razzing you. I know that model is about half what the piston versions go for, and there was probably a discount in there somewhere