Results 1 to 4 of 4
-
14 March 2017, 12:13 #1
TRIARC Systems Custom Finish TRACK Barrels
5.56mm NATO Chambered
Barrel Steel: 4150V grade Milspec B-11595E Chromium-Molybdenum-Vanadium (CrMoV)
Gas System varies on Barrel Length Selected
Thread pitch at muzzle: 1/2 x 28 inch
Twist rate: 1/7
Treatment: Many Treatments Available. Gold- Tin, Light Gold – ZrN, Blue – TiALN, Silver TCN. Choose Finish & Barrel Length Before Adding to Cart.
Note: Barrels are turned on centers and never chopped down from longer lengths. SEP Rifling Patents Pending.
TRACK™ is a proprietary rifling known as Single Edge Polygonal (SEP) available through TRIARC Systems. The primary function of this innovation is to provide an improved rifling for a gun barrel, which has a single edge area and a polygonal area separating the grooves. In essence, it is a combination of standard and polygonal rifling. This hybrid reduces any substantial deformation of the bullet due to its minimal engraving. It allows the bullet to move more symmetrically along the barrel, enabling a straighter line towards the target. Furthermore, the tighter seal of the projectile reduces forward escaping gases, and therefore, minimal loss of gas pressures. Ultimately, this design has the capabilities of shooting match grade ammunition at sub MOA accuracy.
Lengths:
17.3"
16"
14.5"
12.5"
10.5"
MRSP $423.53
https://triarcsystems.com/product/cu...-track-barrel/
-
15 March 2017, 15:22 #2LEO / MIL
- Join Date
- Mar 2011
- Location
- SLC, UT
- Posts
- 606
- Downloads
- 0
- Uploads
- 0
I wonder what the purported benefits of each of the different treatments is. I did a very minimal amount of poking around on their site and didn't see what they're good for.
-
16 March 2017, 03:01 #3
Not from their site but may be similar to this.
http://www.crypticcoatings.com/bolt-...roup-coatings/
-
11 April 2017, 13:38 #4
Triarc Track barrels have a really good reputation. I need to try one out sometime.