Results 31 to 45 of 83
Thread: NEW Hodge Defense AU Mod 2
-
2 January 2015, 03:10 #31
-
23 January 2015, 05:52 #32
-
26 January 2015, 09:53 #33Senior Member
- Join Date
- Apr 2014
- Posts
- 534
- Downloads
- 0
- Uploads
- 0
I like the idea of a better upper to lower fit and smoother operation of takedown pins. I wonder if that will be across the board or if he is just matching the upper to the lower. My Noveske pins (not factory built) are really tight on one of my builds.
-
23 March 2015, 06:33 #34
-
24 March 2015, 13:17 #35Senior Member
- Join Date
- Jul 2013
- Location
- Bentonville,AR
- Posts
- 783
- Downloads
- 0
- Uploads
- 0
Just a little something something to look at...
(14.5" barrel)
-
24 March 2015, 13:22 #36Senior Member
- Join Date
- Jul 2013
- Location
- Bentonville,AR
- Posts
- 783
- Downloads
- 0
- Uploads
- 0
I got to play with one of the first MOD 2 upper/lowers. The fit was flawless right off the UPS truck. Now I can't say whether or not that is a freak incident, but Jim Hodge assured me that was what they were going for. Any MOD2 upper on any MOD2 lower, with reverse-compatibility to mil-spec. There is a tension screw in the grip area that is backed out on the MOD2 complete guns, that the end-user can adjust if they wish to achieve a slop-free fit with a mil-spec lower, which may or may not mate "as precisely" as the OEM MOD2 upper would, due to other manufacture variances beyond HDSI's control, obviously. That said, the MOD2 uppers and lowers are dimensioned to mil-spec.
-
28 March 2015, 19:42 #37
The hodge mod 2 was in this month's ar15 magazine. Snapped a couple photos while my wife was dragging me around Walmart tonight.
Sent from my iPhone using Tapatalk
-
7 May 2015, 10:54 #38
While you're waiting on your AU-MOD 2 here's you some shirts.
http://teespring.com/stores/HodgeDefense
-
7 May 2015, 14:19 #39Senior Member
- Join Date
- Jul 2013
- Location
- Bentonville,AR
- Posts
- 783
- Downloads
- 0
- Uploads
- 0
-
12 May 2015, 06:16 #40Senior Member
- Join Date
- Jul 2013
- Location
- Bentonville,AR
- Posts
- 783
- Downloads
- 0
- Uploads
- 0
Filling in the gaps soon...
-
12 May 2015, 07:47 #41
-
12 May 2015, 08:15 #42Senior Member
- Join Date
- Jul 2013
- Location
- Bentonville,AR
- Posts
- 783
- Downloads
- 0
- Uploads
- 0
-
9 July 2015, 04:46 #43Senior Member
- Join Date
- Jul 2013
- Location
- Bentonville,AR
- Posts
- 783
- Downloads
- 0
- Uploads
- 0
Swung by HDSI yesterday. Rifles are coming on nicely. Civilian production should begin soon. Complete rifles for other clients are already producted/being produced. Here is a preview of the 14.5" chf barrel. Weighs the same as a .gov profile of equal length.
-
13 September 2015, 07:11 #44Senior Member
- Join Date
- Jul 2013
- Location
- Bentonville,AR
- Posts
- 783
- Downloads
- 0
- Uploads
- 0
-
13 September 2015, 07:20 #45