Results 1 to 5 of 5
-
14 October 2014, 13:17 #1New Member
- Join Date
- Oct 2014
- Posts
- 2
- Downloads
- 0
- Uploads
- 0
A new tool Mod that I came up with...
I am a beginner with the AR15 and just thought I would share an idea I came up with to help me with the bolt catch roll pin...
I have not seen anything like this on the market so I made my own tool...
I think it's handy, maybe someone else will too.
Link to video of me using it:
https://www.youtube.com/watch?v=2fYCEzg0jno
Link to me modifying the tool:
Part 1
https://www.youtube.com/watch?v=owHk55KMLB4
Part 2
https://www.youtube.com/watch?v=-M_bCvDBNnk
Thanks!
Ed.
-
14 October 2014, 13:27 #2
That, sir, is not a bad idea! +1 internets for you!
-
14 October 2014, 15:29 #3
I put mine in using vice grips with the jaws taped with electrical tape. Worked just as if it was a press :)
Freedom is NEVER Free. We have to work to protect it and even be willing to die to protect it.
-
14 October 2014, 15:37 #4
-
15 October 2014, 09:41 #5New Member
- Join Date
- Oct 2014
- Posts
- 2
- Downloads
- 0
- Uploads
- 0
Yes I think a lot of people do it that way... This was just a thought I had one day and wanted to see if I could do it cheap and with very basic tools.
I had a lot of fun with it. And it is a nice little addition on my gun bench.
Just thought I would share it...
Thanks!
Ed.