Page 1 of 2 12 LastLast
Results 1 to 15 of 17
  1. #1
    Join Date
    Sep 2014
    Location
    Texas
    Posts
    5,854
    Downloads
    2
    Uploads
    0

    9mm Pmag coversion (Run 9mm in a standard lower for $50)

    It's actually not a conversion of the lower at all. All parts on the lower are completely the same. It's actually a magazine conversion where you swap out Pmag guts and your standard lower can run 9mm.

    No blocks, no anything except a standard lower, a standard 9mm upper-- and of course the PMag conversion kit. Just change the guts out of a magazine and you can run it on an already SBR'ed lower.

    I am on the fence about a 9mm AR, but if this proves to be reliable over time I could see myself building a 9mm upper and going from there. It's a way to dip my toe in the water before I go out and SBR a lower for something I am not entirely sure about. If I wind up liking 9mm ARs I could just use the same upper and build a dedicated lower for it later. I will be watching to see how this turns out.

    It's not entirely compatible with some of the various 9mm upper systems but the 'basic type' it is. Pretty cool if it works and is reliable. Fun option for a range toy for sure.

    What do you guys think?


  2. #2
    Join Date
    Aug 2014
    Posts
    61
    Downloads
    0
    Uploads
    0
    I can't find anything on the internet, but I remember seeing a Spikes 9mm MRP barrel. That, a bolt, and a couple of these converted magazines and I could be shooting indoors all winter.

    Sent from my SM-G960U using Tapatalk

  3. #3
    Join Date
    Sep 2013
    Location
    WA
    Posts
    4,782
    Downloads
    1
    Uploads
    0
    I think it’s too much..lol

    Couple mag conversions and you could have bought a lower. As just about everyone has Glock mags, so they go hand in hand mostly.

  4. #4
    Join Date
    Sep 2014
    Location
    Texas
    Posts
    5,854
    Downloads
    2
    Uploads
    0
    Quote Originally Posted by mustangfreek View Post
    I think it’s too much..lol

    Couple mag conversions and you could have bought a lower. As just about everyone has Glock mags, so they go hand in hand mostly.
    Except for me.

    Don't own a Glock so I would be paying for mags no matter what.

    33 round Glock mags are $36 bucks plus shipping...

    Like I was saying above... I am not 100% committed to the idea of PCC so getting a dedicated lower SBR'ed and what not still raises questions for me. This kind of setup would allow me to just build an upper...and if I like the caliber I can buy a devoted lower later on with the exact same upper. If I decide it's not really for me I could try and sell the upper and be done with it.

    It could be a good way to try out something.

    And with this you get LRBHO.

    And if you want to you can convert the Pmag back to 5.56 and keep on using if it you don't like it.

    Basically $80 bucks for 3 mags and the cost of an upper....I could blow $80 in ammo...
    Last edited by alamo5000; 21 April 2019 at 23:11.

  5. #5
    Join Date
    Sep 2014
    Location
    Texas
    Posts
    5,854
    Downloads
    2
    Uploads
    0
    I found this link here... a 3 pack of the mag conversions for $79 bucks and free shipping. I already have a few PMags that I could convert...

    https://aimsurplus.com/mean-arms-end...insert-3-pack/


    Here is the link to the manufacturer's site....

    https://www.meanarms.com/products/detail/endomag-9mm

  6. #6
    Join Date
    Sep 2014
    Location
    Texas
    Posts
    5,854
    Downloads
    2
    Uploads
    0
    Installing them is easy as hell. Look at that...



  7. #7
    Join Date
    Sep 2013
    Location
    WA
    Posts
    4,782
    Downloads
    1
    Uploads
    0
    Well do it and report back...

  8. #8
    Join Date
    Sep 2014
    Location
    Texas
    Posts
    5,854
    Downloads
    2
    Uploads
    0
    CMMG is offering a similar product. Just released. See the video below.


    https://www.full30.com/watch/MDIwMzg0/cmmg-9-arc

  9. #9
    Join Date
    Sep 2014
    Location
    Kent, Wa.
    Posts
    154
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by alamo5000 View Post
    CMMG is offering a similar product. Just released. See the video below.


    https://www.full30.com/watch/MDIwMzg0/cmmg-9-arc
    Looks almost exactly like the Endo Mag. My interest is piqued....



    Ric

  10. #10
    Join Date
    Sep 2014
    Location
    Texas
    Posts
    5,854
    Downloads
    2
    Uploads
    0
    Quote Originally Posted by fairlanericky View Post
    Looks almost exactly like the Endo Mag. My interest is piqued....



    Ric
    The video said the mags were made out of collaboration between Mean Arms and CMMG.


    https://www.cmmginc.com/9-arc/

  11. #11
    Join Date
    Sep 2014
    Location
    Kent, Wa.
    Posts
    154
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by alamo5000 View Post
    The video said the mags were made out of collaboration between Mean Arms and CMMG.


    https://www.cmmginc.com/9-arc/
    See, I didin't get that far in the video but now I know why they look so similar,



    Ric

  12. #12
    Join Date
    Sep 2014
    Location
    Texas
    Posts
    5,854
    Downloads
    2
    Uploads
    0
    Quote Originally Posted by fairlanericky View Post
    See, I didin't get that far in the video but now I know why they look so similar,



    Ric
    I will probably buy a few of these and hopefully someone here can let me borrow a 9mm upper If I likey I will build my own...

  13. #13
    Join Date
    Sep 2013
    Location
    WA
    Posts
    4,782
    Downloads
    1
    Uploads
    0
    Just build a upper already....

    Lol..you know you’ll like it..

  14. #14
    Join Date
    Sep 2014
    Location
    Texas
    Posts
    5,854
    Downloads
    2
    Uploads
    0
    Quote Originally Posted by mustangfreek View Post
    Just build a upper already....

    Lol..you know you’ll like it..
    I am digging myself out of a hole man. (really). So I have to be frugal until I can get back into full action my buying potential is limited.

  15. #15
    Join Date
    Sep 2014
    Location
    Texas
    Posts
    5,854
    Downloads
    2
    Uploads
    0
    Question from the group... I found this image on Quarter Circle 10's website. Apparently the barrel measurements, or rather the way you measure a barrel is different for a PCC.

    Does anyone know of any handguard/barrel combos that could give me a good suppressor fit?

    If if I wind up doing this----if the ID of the hand guard is big enough I might buy a 3 lug and very slightly tuck the can (maybe but not something I am actively looking to do).

    I also might use griffin's 9mm taper mount muzzle device and their threaded blast shield. Honestly I like this latter idea better but both have their pros. With the 3 lug I can run it in the K configuration, but in the latter I can taper mount it.

    https://www.griffinarmament.com/tape...mmer-comp-9mm/

    https://www.griffinarmament.com/tape...-blast-shield/

    Name:  Capture1.JPG
Views: 568
Size:  136.4 KB

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •