Results 16 to 28 of 28
-
11 November 2014, 17:43 #16
-
12 November 2014, 06:38 #17
Looks like the Phase5 Hex-2 is going to be the route for me.
Short, but also gives me added LOP.
http://phase5wsi.com/hex-2-pistol-bu...ube-hex-2.html
Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
12 November 2014, 08:01 #18
-
12 November 2014, 08:32 #19
Well that's good to hear.
Hoping to have this thing done by end of February. I am finally putting a goal to it.Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
12 November 2014, 08:56 #20
-
12 November 2014, 08:57 #21Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
12 November 2014, 12:00 #22
-
12 November 2014, 17:55 #23
Well, I sat down and did some measuring on my 14.5 carbine.
With a 10.5" barrel, its looking like I should have a solid 8" to play with (that sounds bad) as far as the buffer tube goes.Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
12 November 2014, 18:26 #24
-
12 November 2014, 18:27 #25
Not even gonna make that comment sound any less sexual
-
14 November 2014, 08:42 #26
To further derail my own thread (hey, it's my thread right?)...
The sig brace was back ordered so not sure when I'll get that.
But, the wife also got me the Noveske rail panels, what a PITA to install. My gas block was not low pro enough so I had to do some modifications on a couple tabs.
Crappy phone pic
Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
15 November 2014, 08:27 #27
I really like NSR panels, but like you said, they are a PITA to install sometimes. I find they work the best on NSR rails, but I know people install them all the time on non-Noveske Rails. Speaking of, I wish Noveske would start making more 13.5" and 9" NSR's... those handguards seem to be vaporware the last year.
-
15 November 2014, 10:07 #28