Transfer Times

[gatordev]

Since we're on the topic of stamps, is it true when you do a form 1 online that you can just print your stamp? My buddy was telling me they don't mail it if you do eforms.


Sent from my iPhone using Tapatalk

That is correct. You get emailed your approved F1 with a "stamp" watermarked in a pdf document.

[The FNG]

That is correct. You get emailed your approved F1 with a "stamp" watermarked in a pdf document.

Thanks!

[SINNER]

Well one thing is certain, they have streamlined the credit card charges. 3 forms mailed on Friday, received on Monday and card charged on Wednesday. The first time I used the CC payment I sent in two forms and 2 charges were made to the card. This time they did a single transaction for the total amount.

[SwissyJim]

Well one thing is certain, they have streamlined the credit card charges. 3 forms mailed on Friday, received on Monday and card charged on Wednesday. The first time I used the CC payment I sent in two forms and 2 charges were made to the card. This time they did a single transaction for the total amount.

That's funny as I tried to use my CC for a Form4 and it was returned to the dealer saying it was not valid. The same exact card I used on all three eForm form1's and it worked everytime. I checked with the bank and they did not deny the charge and it was written down correctly on my form. Only thing I can think of i someone did not put in the correct numbers into the machine and never bothered to check or try again. On a happy note, having to resubmit it after the error may have helped me get it approved sooner as it was done in 4 months.

Off to pick up my 458Socom can today!!

[gatordev]

... as it was done in 4 months.

Off to pick up my 458Socom can today!!

Jerk.

Okay, so now you're motivating me to give them a call tomorrow at work.

[SwissyJim]

Jerk.

Okay, so now you're motivating me to give them a call tomorrow at work.

Sorry... but certainly follow up

Just got my 458can... was approved on 3/11 but postmarked on 5/03. Almost 2 damn months between!!
insane.

[UWone77]

Jim, when did you submit?

[SwissyJim]

Jim, when did you submit?

The Lane 458Scorpion was submitted on 9/28/15, approved 3/11/16 but not received until today 5/12/16
The SilCo Omega was submitted 10/13, Approved 3/16/16 and received 3/28/16 (guess it was 5 months)

[GriffonSec]

Thompson Machine Poseidon .45:
Form 4 trust filed 1/4/16
Approved 5/11/16

Now if the dealer I went through stays on the ball....they had it almost 2 months before I found out the Form 3 had cleared to them by calling. "Oh, we didn't call you? Gee...I coulda swore we did..."

Griffon Checkmate QD:
Form 4 Trust filed 3/3/16
Form 3 transferred from Silencer Shop to LGS 3/31/16
Still pending.

Dealing with Silencer Shop is lightyears beyond good stuff. I should have gotten the TM Poseidon through them too...

[tappedandtagged]

Efiled Form 1- Trust- for Rem 870 SBS
Submitted 1/29/16
Approved 5/12/16

[Stickman]

Efiled Form 1- Trust- for Rem 870 SBS
Submitted 1/29/16
Approved 5/12/16

Now there's something I want to see pictures of.

[LHTwist]

Paper Form 1 (x2) - Trust mailed 1/04/2016
SBR & Suppressor: used Coyote Rifle Works example
Check cleared on 1/12/2016
Rejected on 5/02/2016 (zero tolerance!)
Corrected & returned on 5/13/2016

Sent from my LGUK410 using Tapatalk

[tappedandtagged]

Now there's something I want to see pictures of.

My gunsmith went in for knee surgery the day after! I'm waiting for him to recover so I can get the barrel cut and choked. But, I'll tell you this, I'm going for an old worn look. Starting with a 1970's wingmaster with a 12.5" lop cut down wood stock. The barrel will be cut at 12.5" as well. The bluing on the receiver is badly worn.

I may or may not reblue or cerakote it and Magpul it out. But, in all likelihood, I'm gonna leave it as is, worn and pretty.

[Joelski]

My gunsmith went in for knee surgery the day after! I'm waiting for him to recover so I can get the barrel cut and choked. But, I'll tell you this, I'm going for an old worn look. Starting with a 1970's wingmaster with a 12.5" lop cut down wood stock. The barrel will be cut at 12.5" as well. The bluing on the receiver is badly worn.

I may or may not reblue or cerakote it and Magpul it out. But, in all likelihood, I'm gonna leave it as is, worn and pretty.

Sounds sweet!

[Ordnance]

My gunsmith went in for knee surgery the day after! I'm waiting for him to recover so I can get the barrel cut and choked. But, I'll tell you this, I'm going for an old worn look. Starting with a 1970's wingmaster with a 12.5" lop cut down wood stock. The barrel will be cut at 12.5" as well. The bluing on the receiver is badly worn.

I may or may not reblue or cerakote it and Magpul it out. But, in all likelihood, I'm gonna leave it as is, worn and pretty.

Good God yes. Leave it old school worn...