Results 1 to 14 of 14

Thread: P320 Project

  1. #1
    Join Date
    Nov 2013
    Location
    Texas
    Posts
    315
    Downloads
    0
    Uploads
    0

    P320 Project

    this will be my main carry pistol in near future.

    WET3.jpg

    Right now its just a bone stock pistol.

    List of things to do
    -Light - Looking at TLR-1 or Inforce APL
    -Night Sights - Looking at Trijicon HD or XS Sights
    -Stipple Grip - Possibly doing it myself. Perks of the P320 is I screw up new grip $45. So any suggestions and tips are appreciated.
    -Trigger - Apex Flat Trigger

    Any other suggestions for parts especially on sights would be helpful.

  2. #2
    Join Date
    Jun 2009
    Posts
    423
    Downloads
    0
    Uploads
    0
    Trijicon has a new version of their HD sight with a narrower front sight post. I have a set of these on a 320 full size and like them so far.

    Sent from my SM-G930P using Tapatalk
    Last edited by usbp379; 22 April 2017 at 12:08.

  3. #3
    Join Date
    Jan 2015
    Location
    Walton<ky
    Posts
    434
    Downloads
    0
    Uploads
    0
    I have the standard xs sights and love them I also polished trigger bar and went with the apex flat trigger


    Sent from my iPhone using Tapatalk

  4. #4
    Join Date
    May 2009
    Location
    Wa
    Posts
    684
    Downloads
    0
    Uploads
    0
    I'd look into Sig's X-ray sights that come on the Legions .Here are the 2 sku's for the sets that fit the 938/320 SGSOX10001 SGSOX10002
    x-ray-1.jpg
    Last edited by Sak007; 22 April 2017 at 21:48.

  5. #5
    Join Date
    Dec 2009
    Posts
    2,054
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by Sak007 View Post
    I'd look into Sig's X-ray sights that come on the Legions .Here are the 2 sku's for the sets that fit the 938/320 SGSOX10001 SGSOX10002
    x-ray-1.jpg
    This. The sights on my Legion are out-freaking-standing. Indoor, outdoor, day, night... Yes.
    -One Nation, Under God

    -"The bad news is time flies. The good news is you're the pilot." ~ Michael Althsuler

  6. #6
    Join Date
    Nov 2010
    Location
    FL
    Posts
    2,495
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by Aragorn View Post
    This. The sights on my Legion are out-freaking-standing. Indoor, outdoor, day, night... Yes.
    How are they on targets that match their background? Like shot up steel on a dirt (here it's sand and top soil which is gray like the target) back stop? Lately I've been finding my Trijicon HDs really start to disappear on me in this situation, no doubt due to age (of user) as much as "washout." Admittedly this is on my G17, but still, same idea compared to the stock Sig Night Sights on my Sig guns.

  7. #7
    Join Date
    May 2009
    Location
    Wa
    Posts
    684
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by gatordev View Post
    How are they on targets that match their background? Like shot up steel on a dirt (here it's sand and top soil which is gray like the target) back stop? Lately I've been finding my Trijicon HDs really start to disappear on me in this situation, no doubt due to age (of user) as much as "washout." Admittedly this is on my G17, but still, same idea compared to the stock Sig Night Sights on my Sig guns.
    I'll see if the boss will let me take a Legion tomorrow for testing & evaluation

  8. #8
    Join Date
    Dec 2009
    Posts
    2,054
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by gatordev View Post
    How are they on targets that match their background? Like shot up steel on a dirt (here it's sand and top soil which is gray like the target) back stop? Lately I've been finding my Trijicon HDs really start to disappear on me in this situation, no doubt due to age (of user) as much as "washout." Admittedly this is on my G17, but still, same idea compared to the stock Sig Night Sights on my Sig guns.
    Can't really say I've noticed anything negative. The front sight seriously "pops" and is hard to miss. Most, and I do mean most, of my shooting is done on IPSC targets with dirt/grass backgrounds on an action range. Occasionally some steel plates. Less frequent are paper targets at an indoor range. I've never had the sights disappear or fade on me. On really bright afternoons you'd almost think the front sight was fiber optic. When it's dim above and behind me and bright in the target area, the dots pretty much disappear and leave me with a crisp black sight picture, and the rear notch leaves you plenty of light on either side of the FS to work with.

    Now, in twilight conditions on shot up sub-8" plates, against dirt backgrounds, and at ranges 30+ yards I've had the targets try and fade into the dirt while maintaining a sharp FS focus, but that's the target and not the sight. At night or in the dark the tritium is like "POW" and is noticeably brighter than both the Warrens I put on an M&P as well as the Trijicons on a buddies 1911 (don't remember which Trijicons though). However, to be fair the sights on the M&P are about 5-6 years old and the ones on the 1911 are probably pushing 8, so I may just be conditioned to faded tritium.

    The only complaint I can come up with is that all 3 tritium vials are green, while I prefer to have the dimmer yellow vials in the rear. Really though, that's just my user preference.

    I have no intention of changing these sights until they fade, and then the reckoning is I'll replace them with a new set of the same.
    -One Nation, Under God

    -"The bad news is time flies. The good news is you're the pilot." ~ Michael Althsuler

  9. #9
    Join Date
    Nov 2013
    Location
    Texas
    Posts
    315
    Downloads
    0
    Uploads
    0
    Thanks guys for the suggestions. I'll have to give the X-ray sights a gander.

  10. #10
    Join Date
    Nov 2013
    Location
    PNW
    Posts
    1,752
    Downloads
    0
    Uploads
    0
    As much as i like the X-Ray sights on my P229 Legion, i like Trijicon HDs better. Specifically Trijicon HDs with the orange front sight. I found the yellow washed out too easily. I don't have a problem with the front sight washing out on the X-Rays, but i definitely like the rear u-notch in the Trijicons better than the Sigs. That said, i'm not going to replace the x-ray sights on my Legion anytime soon.
    "It's time to start slapping people." - George Carlin

    NRA Life Member | SAF Life Member | FPC Member

    ΜΟΛΩΝ ΛΑΒΕ

  11. #11
    Join Date
    Sep 2010
    Location
    PNW
    Posts
    14,846
    Downloads
    0
    Uploads
    0
    If I were to go with a P320, I would have the BattleCock/Axlnut package done.

  12. #12
    Join Date
    Nov 2013
    Location
    Battle Cock Tactical
    Posts
    1,179
    Downloads
    0
    Uploads
    0

    P320 Project

    Quote Originally Posted by UWone77 View Post
    If I were to go with a P320, I would have the BattleCock/Axlnut package done.
    Josh.S has some excellent photos floating around here somewhere. I stole these from one of his FB posts.



  13. #13
    Join Date
    Jun 2009
    Posts
    423
    Downloads
    0
    Uploads
    0
    I had Ben at Boresight Solutions texture a frame per his Duty Package. It turned out well. The package includes a minor reshaping of some areas but the best improvement is from the more aggressive texturing.

    Sent from my SM-G930P using Tapatalk

  14. #14
    Join Date
    Sep 2010
    Location
    PNW
    Posts
    14,846
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by Battle Cock View Post
    Josh.S has some excellent photos floating around here somewhere. I stole these from one of his FB posts.
    That's it. This is exactly what I'd want to do on a P320. Wasn't really even interested in getting one until I saw this gun!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •