Page 1 of 3 123 LastLast
Results 1 to 15 of 33

Thread: Aero M5 thread

  1. #1
    Join Date
    Jan 2012
    Location
    On the bank of the Mighty Muskingum
    Posts
    4,029
    Downloads
    6
    Uploads
    0

    Aero M5 thread

    Hopefully the last one. Tired of bombing other people's threads so...

    I really would like to try an FDE A2 stock on this. Picked up the builder set on a labor day sale. Barrel is a DSG (suspect rebadged BA) match grade 18" 416ss, 1:10, MD is the freebie mini brake that came with my GA Alpha can. I had lots of the small bits on hand, so this fell together at a super nice price.

    Hunting some KAC irons, or some Magpul pros. Hoping to keep with the tan scheme, so W.O. for the magpul sights.

    Hoping to try a magpul bipod on this, but she's definitely big boned as-is.
    There's no "Team" in F**K YOU!

  2. #2
    Join Date
    Mar 2013
    Location
    The Unfree State (MD)
    Posts
    2,731
    Downloads
    3
    Uploads
    0
    I refuse to build any large frame AR’s with anything but a rifle length buffer. Even the A5’s are nowhere close to how well they run with a rifle length setup. I run Magpul PRS stocks on almost all of mine.

    Nice looking rifle.

  3. #3
    Join Date
    Nov 2013
    Location
    Seattle, WA
    Posts
    2,070
    Downloads
    0
    Uploads
    0
    Looks good. Sounds like you haven't shot it yet? I'm curious to see how well it does for you out of the gate as the large frames have a reputation for requiring a bit more "tuning" up front. I started off with an adjustable gas block on mine, but I also wanted to run lightweight BCGs so i could keep the weight down.

    Looking forward to the range report!

  4. #4
    Join Date
    Jan 2012
    Location
    On the bank of the Mighty Muskingum
    Posts
    4,029
    Downloads
    6
    Uploads
    0
    Me too. Hoping to get out tomorrow.
    There's no "Team" in F**K YOU!

  5. #5
    Join Date
    Jan 2012
    Location
    On the bank of the Mighty Muskingum
    Posts
    4,029
    Downloads
    6
    Uploads
    0
    I wondered about this, but i guess Ill find out soon enough. Any recommendations on tubes, springs and buffers would be appreciated. I don't want to grab the wrong part. Same for the gas block. I've read comments, but I want to try this setup normal, and suppressed and see how it runs. I might be easily satisfied, but I've had amazing luck running standard buffers and gas blocks on all of my 5.56 rifles.
    Quote Originally Posted by SINNER View Post
    I refuse to build any large frame AR’s with anything but a rifle length buffer. Even the A5’s are nowhere close to how well they run with a rifle length setup. I run Magpul PRS stocks on almost all of mine.

    Nice looking rifle.
    There's no "Team" in F**K YOU!

  6. #6
    Join Date
    Sep 2010
    Location
    PNW
    Posts
    15,286
    Downloads
    0
    Uploads
    0
    For 16" 308's, I've had good luck with 308 buffers in AR15 Extensions. Obviously, your mileage will vary, I've seen others have issues.

  7. #7
    Join Date
    Jan 2012
    Location
    On the bank of the Mighty Muskingum
    Posts
    4,029
    Downloads
    6
    Uploads
    0
    The Brownell's BCG is a heavy mofo, so itll be interesting to see how it works with and without a can.
    There's no "Team" in F**K YOU!

  8. #8
    Join Date
    Aug 2017
    Location
    South Louisiana
    Posts
    128
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by Joelski View Post
    Hopefully the last one. Tired of bombing other people's threads so...

    I really would like to try an FDE A2 stock on this. Picked up the builder set on a labor day sale. Barrel is a DSG (suspect rebadged BA) match grade 18" 416ss, 1:10, MD is the freebie mini brake that came with my GA Alpha can. I had lots of the small bits on hand, so this fell together at a super nice price.

    Hunting some KAC irons, or some Magpul pros. Hoping to keep with the tan scheme, so W.O. for the magpul sights.

    Hoping to try a magpul bipod on this, but she's definitely big boned as-is.

    It’s not a traditional looking A2 stock, but I’m very happy with the Magpul fixed rifle stock I went with on my M5 which I’m sure comes in tan. I went with AP’s 308 A2 length buffer tube, spring and buffer kit and it’s run flawlessly.

  9. #9
    Join Date
    Jan 2012
    Location
    On the bank of the Mighty Muskingum
    Posts
    4,029
    Downloads
    6
    Uploads
    0
    Well, FML! Made it through a 20 rnd mag flawlessly, consistent ejection, last round bolt lock, etc...

    On the second mag, I attached my suppressor. About 3-4 rounds in (same LC 147 gr ball ammo), I get a stovepipe. Drop the mag, clear the stovepipe and there's a round stuck partially in the chamber. Looks exactly like this:



    Clear that, and its now hard to move the CH/BCG in the receiver. Take it apart, nothing really stands other than this:



    Mudda effin extractor is bent!



    Is that on me, or is it a cheap-ass brownell's bolt issue?

    Gonna work out the rifle recoil/buffer system and give it another try. I buy the whole recoil is tamer with the rifle length system, but please convince me that I need an adjustable gas block.
    There's no "Team" in F**K YOU!

  10. #10
    Join Date
    Aug 2017
    Location
    South Louisiana
    Posts
    128
    Downloads
    0
    Uploads
    0
    I’d email Brownell’s about it and see if they’ll warranty it for ya. I’ve heard great things about their warranty policy and customer service.

  11. #11
    Join Date
    Sep 2009
    Posts
    1,583
    Downloads
    0
    Uploads
    0
    The AR10 platform is really finicky when it comes to using a suppressor. Believe me, I've been through quite a few of the current offerings, and I have a wide array of cans in terms of back pressure.

    If you don't have a way to tune the gas system, you'll hate shooting it suppressed. I have wasted a lot of time, ammo, and money chasing this.
    Will - Owner of Arisaka LLC - http://www.arisakadefense.com

  12. #12
    Join Date
    Jan 2012
    Location
    On the bank of the Mighty Muskingum
    Posts
    4,029
    Downloads
    6
    Uploads
    0
    Roger on the adjustable gas block. No can 'til then.
    There's no "Team" in F**K YOU!

  13. #13
    Join Date
    Jan 2012
    Location
    On the bank of the Mighty Muskingum
    Posts
    4,029
    Downloads
    6
    Uploads
    0
    So, does the adjustable gas block allow for cycling on the wide-open setting without a can? Is there a balance that allows both, or is that part of the bad experience? I can run this un-suppressed no problem, and will if its that much of a PITA to do both.
    There's no "Team" in F**K YOU!

  14. #14
    Join Date
    Sep 2010
    Location
    PNW
    Posts
    15,286
    Downloads
    0
    Uploads
    0
    There is a reason why some people just do a dedicated suppressed setup. Just build another twin for non-suppressed shooting.

  15. #15
    Join Date
    Sep 2009
    Posts
    1,583
    Downloads
    0
    Uploads
    0
    It'll be great unsuppressed or OK suppressed. You won't get both with the same setting, though. Only KAC seems to be able to do that with the latest revisions to the sr25, but even then it is a bit gassy/dirty suppressed.
    Will - Owner of Arisaka LLC - http://www.arisakadefense.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •