Results 1 to 12 of 12
  1. #1
    Join Date
    May 2013
    Posts
    820
    Downloads
    0
    Uploads
    0

    Silencerco MAAD mounts?

    I have an older Silencerco Saker (my only can) with the MAAD mount system. Looks like the flash hiders and comps with the MAAD mount are discontinued. Still need them going forward. Anybody have a stash or know of a way to get ahold of at least one?

  2. #2
    Join Date
    Sep 2014
    Location
    Texas
    Posts
    5,854
    Downloads
    2
    Uploads
    0
    Not sure but you can also consider doing what Former11b did here:

    http://www.weaponevolution.com/forum...threads-Plan-A

  3. #3
    Join Date
    Sep 2014
    Location
    Texas
    Posts
    5,854
    Downloads
    2
    Uploads
    0
    While I am not familiar with your suppressor at all something like this from these guys (or someone else) might be a good option.

    https://www.griffinarmament.com/plan...s/#description

  4. #4
    Join Date
    Sep 2014
    Location
    Texas
    Posts
    5,854
    Downloads
    2
    Uploads
    0
    This one says it's compatible with the Saker. I don't know anything at all about those mounts though.

    https://www.griffinarmament.com/plan...r-suppressors/

  5. #5
    Join Date
    May 2013
    Posts
    820
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by alamo5000 View Post
    This one says it's compatible with the Saker. I don't know anything at all about those mounts though.

    https://www.griffinarmament.com/plan...r-suppressors/
    I am going to do a bit more research on this option. SiCo really should just send me an ASR mount for my Saker so I can just keep buying their muzzle devices. Kinda sucks that I gotta make a change but you gotta do what you gotta do.

    Thanks everybody.

  6. #6
    Join Date
    Sep 2010
    Location
    PNW
    Posts
    15,286
    Downloads
    0
    Uploads
    0
    MAAD mounts suck.

    Cost/Benefit you can swap your Saker to a Keymo mount. Even at minimum go with the ASR mount.

  7. #7
    Join Date
    Sep 2013
    Location
    WA
    Posts
    4,782
    Downloads
    1
    Uploads
    0
    I’m not real familiar with that can
    Does it have the 1.375" X 24 threads in the can?

    If so then you have quite a few options
    Dead air
    Griffin
    Yhm
    Hellfire
    Jmac

    And more

  8. #8
    Join Date
    Sep 2010
    Location
    PNW
    Posts
    15,286
    Downloads
    0
    Uploads
    0
    If you insist on staying with MAAD Mounts, I just checked some stock. I have 3 MAAD muzzle devices.

    1 FH 1/2x28
    1 Brake 1/2x28
    1 Brake (Noveske Marked) 5/8x24

  9. #9
    Join Date
    May 2013
    Posts
    820
    Downloads
    0
    Uploads
    0
    Thanks. I might take those off your hands. Let me know what you would like for them.

    In any case I will have to eventually make a change.

  10. #10
    Join Date
    Oct 2014
    Posts
    21
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by UWone77 View Post
    MAAD mounts suck.

    Cost/Benefit you can swap your Saker to a Keymo mount. Even at minimum go with the ASR mount.
    I like it until I got a FH stuck. When I tried to take it off I broke the pin and it sheared through the threads. But then I saw a Key-Mo get seized. So now I'm just bummy about it. Too many Trifecta muzzle devices to swap out at this point.

  11. #11
    Join Date
    Jul 2013
    Posts
    845
    Downloads
    0
    Uploads
    0
    Some years ago I had a problem with a MAAD mount. I contacted SiCo and was sent a ASR mount for free.

  12. #12
    Join Date
    May 2013
    Posts
    820
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by tact View Post
    Some years ago I had a problem with a MAAD mount. I contacted SiCo and was sent a ASR mount for free.
    Yeah...not the case today.

    I decided to change mounting hardware.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •