Page 2 of 2 FirstFirst 12
Results 16 to 16 of 16
  1. #16
    Join Date
    Sep 2013
    Location
    WA
    Posts
    4,782
    Downloads
    1
    Uploads
    0
    Since were sorta comparing numbers, here some of mine as I was digging thru my reload boxes and notes

    I havent loaded or chrono’d these loads in years and were shot mostly in a 18” UM

    Lc brass , cci 450’s , Varget 77’s at 2.250 and 55’s at 2.23

    77gr smk 24.5 2608
    77gr nosler 24.6 2579

    69gr smk - lc brass, cci 450 and 25.3 grains of varget is still a better load out of most of my stuff
    18” = 2860 ish
    16” 2765

    The nosler actually shot better but was a hair slower

    Also migrated away from stick powders as I run a powder measure. Tac , h335, aa2230 are my go to’s and are always on target or within .01 when checking randoms off a Hornady Pm

    Tac ,450’s , LC , never got to chrono’d these , but they shot slightly better
    I Also run 24.8 over 55’s, for good running fmj loads

    77’s= 23.3
    Last edited by mustangfreek; 3 May 2021 at 13:18.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •