Page 1 of 2 12 LastLast
Results 1 to 15 of 27
  1. #1
    Join Date
    Jan 2012
    Location
    On the bank of the Mighty Muskingum
    Posts
    4,029
    Downloads
    6
    Uploads
    0

    Well, I did it. Now what?

    So, I finally broke down and ordered a BRN 180s upper. My hope is to build an ACR style rifle that works better than the Bushmaster offering. The system seems to be reliable in what I've read since it's introduction and I honestly hoped to see more on this board. Looking for recommendations on folding stocks; I'm probably going to go with the 180M lower, so that will necessitate a 1913 attachment for whichever stock I do go with. Looking for any other bits of wisdom, advice, etc.. It's on backorder, so no idea when the upper will be in-hand. Lower is not back-orderable yet, so they must be a ways out from having any stock. Anyway, I have plenty of time to figure out this build, so dump it in!
    There's no "Team" in F**K YOU!

  2. #2
    Join Date
    Aug 2012
    Location
    St. Louis, MO
    Posts
    511
    Downloads
    1
    Uploads
    0
    If you want to go ACR - Dan Haga makes a 1913 adapter for the ACR stock. There only question is aesthetics - is the rail on the 180 lower long enough to look like that stock and adapter were designed to go together.

    I just happen to have an ACR stock and DH adapter because I was considering Form 1 for my BRN 180. I will try to do a mock up for you to see. I just need to do it in a way that doesn't violate the NFA.


    Sent from my iPhone using Tapatalk

  3. #3
    Join Date
    Aug 2012
    Location
    St. Louis, MO
    Posts
    511
    Downloads
    1
    Uploads
    0
    Quote Originally Posted by apmcdaniel View Post
    If you want to go ACR - Dan Haga makes a 1913 adapter for the ACR stock. There only question is aesthetics - is the rail on the 180 lower long enough to look like that stock and adapter were designed to go together.

    I just happen to have an ACR stock and DH adapter because I was considering Form 1 for my BRN 180. I will try to do a mock up for you to see. I just need to do it in a way that doesn't violate the NFA.


    Sent from my iPhone using Tapatalk
    Dan Haga also makes a really nice 1913 adapter fort the Magpul zhokov stock, and it really does look good, like it belongs on there.


    Sent from my iPhone using Tapatalk

  4. #4
    Join Date
    Jan 2012
    Location
    On the bank of the Mighty Muskingum
    Posts
    4,029
    Downloads
    6
    Uploads
    0
    Quote Originally Posted by apmcdaniel View Post
    Dan Haga also makes a really nice 1913 adapter fort the Magpul zhokov stock, and it really does look good, like it belongs on there.


    Sent from my iPhone using Tapatalk
    Thats the way I'm leaning, but I'd prefer the ACR stock. I just like the look of both the folder and the fixed version better than anything else.

    Sent from my SM-G998U1 using Tapatalk
    There's no "Team" in F**K YOU!

  5. #5
    Join Date
    Jan 2012
    Location
    On the bank of the Mighty Muskingum
    Posts
    4,029
    Downloads
    6
    Uploads
    0
    I found a 1913 adapter for the buffer tube hole on a standard AR lower. I have a MI bullet lower just doing nothing.. might get to save a few bucks!

    https://www.brownells.com/rifle-part...rod123902.aspx

    Sent from my SM-G998U1 using Tapatalk
    There's no "Team" in F**K YOU!

  6. #6
    Join Date
    Jan 2012
    Location
    On the bank of the Mighty Muskingum
    Posts
    4,029
    Downloads
    6
    Uploads
    0
    Quote Originally Posted by apmcdaniel View Post
    .

    I just happen to have an ACR stock and DH adapter because I was considering Form 1 for my BRN 180. I will try to do a mock up for you to see. I just need to do it in a way that doesn't violate the NFA.


    Sent from my iPhone using Tapatalk
    Don't worry about it. I don't want to get any of us sideways with the man.


    Sent from my SM-G998U1 using Tapatalk
    There's no "Team" in F**K YOU!

  7. #7
    Join Date
    Jan 2016
    Location
    Tucson, AZ
    Posts
    234
    Downloads
    0
    Uploads
    0
    How is the BRN 180 like an ACR? Seems arguably more like a SCAR to me, as the SCAR has a reciprocating CH, while the ACR has a non-reciprocating CH that can still be used as a forward assist. I would opine that the CZ Bren 2 is the ACR replacement.

  8. #8
    Join Date
    Aug 2012
    Location
    St. Louis, MO
    Posts
    511
    Downloads
    1
    Uploads
    0
    Quote Originally Posted by Joelski View Post
    Don't worry about it. I don't want to get any of us sideways with the man.


    Sent from my SM-G998U1 using Tapatalk
    Well, this was posted on Reddit this evening. I'm assuming the dude that posted did all of the due diligence. I've inquired as to what adapters he's used, will let you know ASAP. I'm pretty sure you would only need the Dan Haga adapter if you go with the BRN180 lower.

    By the way - I think this looks great, overall. You are headed in the right direction.



    Sent from my iPhone using Tapatalk

  9. #9
    Join Date
    Jan 2012
    Location
    On the bank of the Mighty Muskingum
    Posts
    4,029
    Downloads
    6
    Uploads
    0
    That's pretty sweet. My last concern is weight. There is probably close to 2 lbs difference between that setup, and an MCX- style folder, or MI collapsible system.

    Anybody here with an MCX that could speak to its durability?

    Sent from my SM-G998U1 using Tapatalk
    There's no "Team" in F**K YOU!

  10. #10
    Join Date
    Dec 2009
    Posts
    2,101
    Downloads
    0
    Uploads
    0
    Oh man I did not need to see that. Now I want one.
    -One Nation, Under God

    -"The bad news is time flies. The good news is you're the pilot." ~ Michael Althsuler

  11. #11
    Join Date
    Jan 2012
    Location
    On the bank of the Mighty Muskingum
    Posts
    4,029
    Downloads
    6
    Uploads
    0
    Quickest backorder evar!!

    Sent from my SM-G998U1 using Tapatalk
    There's no "Team" in F**K YOU!

  12. #12
    Join Date
    Aug 2012
    Location
    St. Louis, MO
    Posts
    511
    Downloads
    1
    Uploads
    0
    Quote Originally Posted by Joelski View Post
    Quickest backorder evar!!

    Sent from my SM-G998U1 using Tapatalk
    Nice!!! You're half way there!


    Sent from my iPhone using Tapatalk

  13. #13
    Join Date
    Sep 2010
    Location
    PNW
    Posts
    15,286
    Downloads
    0
    Uploads
    0
    BRN-180 is definitely on my list.

    How do they fit on lowers? That's about the only complaint I've seen on them, is the lack of fit, to the point where they question whether they're in spec or not.

  14. #14
    Join Date
    Mar 2013
    Location
    The Unfree State (MD)
    Posts
    2,731
    Downloads
    3
    Uploads
    0
    I just reamed a lower and used oversized JP pins to correct a horribly fitting 180 upper for a friend. It was the third one he had received that would not fit any lower he owned. A few of the rail screw heads were also damaged straight out of the box. Neat design but needs QC help IMO.

  15. #15
    Join Date
    Jan 2012
    Location
    On the bank of the Mighty Muskingum
    Posts
    4,029
    Downloads
    6
    Uploads
    0
    Mine was a little tight on the takedown pin, but otherwise, no worse than mating up a Noveske upper to a non-noveske lower.



    Sent from my SM-G998U1 using Tapatalk
    There's no "Team" in F**K YOU!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •