Results 1 to 10 of 10
Thread: Sig Sauer P365 Fire Control Unit
-
24 August 2021, 12:17 #1
Sig Sauer P365 Fire Control Unit
SIG SAUER is proud to announce the introduction of the P365 Custom Works Fire Control Unit (FCU), bringing an unprecedented level of customization and personalization to the popular P365 platform. Now you can purchase the P365Custom Works FCU as a standalone part and then choose from a variety of different grip modules, magazines, custom slides, barrels, optics, and accessories, allowing you to create and configure a P365 in countless different ways to personally customize your pistol to meet your specific needs and match your personal taste.
.
The P365 Custom Works Fire Control Unit features:
- Exclusive Titanium Nitride Coated Frame
- Titanium Nitride Coated Flat Blade Skeletonized Trigger
- Custom FCU Serial Number
- Compatible with all 9mm P365 accessories
.
Build your own custom P365 with a full line of performance parts and accessories at https://www.sigsauer.com/configurato...-UMkMHbvVM4HA0
-
24 August 2021, 14:20 #2
Nice. You can now customize from the start.
Personally I think customization is a huge market. Look at how many people bought Glocks to just take apart and replace 75% of it. I think Sig has long wanted some of that Glock action (in regards to sales).
I love my XL but I did some customization myself. Mainly I replaced the trigger with an adjustable one from Grayguns and I replaced some springs.
Technically I don't usually alter a carry gun but after I did it I put at least 1,000 rounds through it just to be sure. Honestly it's my favorite carry gun that I've ever owned.
-
25 August 2021, 23:06 #3
The problem with Glock is, they sent C&D letters to all their dealers who were taking apart factory guns for the parts. That's really cut off the supply.
Sig has gone the other direction at least, but I suspect these 365 FCG's will be hard to find like their 320 counterparts.
-
26 August 2021, 16:57 #4
-
26 August 2021, 22:26 #5
-
27 August 2021, 19:19 #6
Thank you. I wasn't aware (or was aware, then forgot - I can't always tell the difference anymore). I just thought it was the general high demand that was the issue. Plenty of folks on GB and other smaller small shops flying under the radar parting out factory new guns if that's the case. Price higher than before so that makes sense.
-
28 August 2021, 17:00 #7
Doesn't seem like you can make much more parting out a Glock? Is there really that much call for factory stock springs, connectors, Barrels etc. vs. aftermarket stuff?
There's no "Team" in F**K YOU!
-
28 August 2021, 17:43 #8
-
10 September 2021, 13:06 #9
https://www.joeboboutfitters.com/Sig...eid=9bdc3f5c4d
Joe Bob has them in stock at this very minute if anyone cares.
-
17 September 2021, 13:15 #10
Rainier Arms has 4 in stock:
https://www.rainierarms.com/sig-saue...ld-flat-blade/