Results 1 to 8 of 8
Thread: Cross Machine Tool HDM Rails
-
17 September 2021, 13:21 #1
Cross Machine Tool HDM Rails
https://www.cmttac.com/index.php?rou...ry&path=95_106
Cross Machine Tool HDM™ 10.5" 11.5" 13" 15" M16/AR15 Handguard
Features-
Rail- 6000 series extruded Aluminum Milspec Type 3 Class 2 Hard Black anodized
Barrel Nut- 7075 Aluminum Type 3 Class 2 Hard Anodized
17-4PH Cored Stainless Steel Rail mounting attachment- Patented
Anti rotate tabs time Rail to upper receiver
No Barrel nut shims required for installation
Does not contact or apply side loads to gas tube
Inner Diameter of handguard - 1.315"
MLOK Slots on all flat sides (7)
Includes barrel nut wrench
Barrel Nut diameter- 1.378"
Compatible with most known low profile gas blocks
10.0, 10.7, 11.7 and 13.0 oz.-Total weight including mounting hardware
Made & Assembled in USA
-
17 September 2021, 13:25 #2
For those curious, these are not replacing their HDX line. These are for the more budget conscious builder who doesn't require QD sockets on the rail. These have spent less time on the machine as well, you can tell they are just more "plain" in their design, but use the same CMT barrel nut. They are also offered in a couple of lengths that the HDX line doesn't have.
Current Coupon Code: “IMISS45” at checkout for a rebate on shipping cost. https://www.cmttac.com/index.php?rou...ry&path=95_106
-
17 September 2021, 17:44 #3
Nice price point. I don't like using QD sockets in aluminum, anyway.
-
18 September 2021, 10:48 #4
-
18 September 2021, 11:55 #5
I like the simple clean look. If I didn’t already have too many AR’s and rails these would be on my next build.
“ When I comes to modern politics, I think the inverse of Hanlon's Razor applies...In other words, "Never attribute to stupidity that which is adequately explained by malice." - Kerplode
-
1 November 2021, 00:27 #6
Digging the color. I'm hoping CMT does a run of receiver sets in the same ano.
-
5 November 2021, 03:04 #7New Member
- Join Date
- Sep 2021
- Posts
- 7
- Downloads
- 0
- Uploads
- 0
Nice looking
-
7 November 2021, 00:03 #8
Nice
Bring on the OD anodized rails.. and receivers..
I’d buy..