Results 2,026 to 2,040 of 3707
Thread: Deals and Hard To Find Items
-
25 September 2016, 18:26 #2026
Different floor plates and a newer follower on the Gen3's if I remember correctly.
-
25 September 2016, 23:41 #2027
Gen3 PMAGs use a different formula polymer, but i think i read someplace that the current production Gen2 mags are now made of the same material. Gen3 mags have more aggressive texture on the front and back of the mag body to help you get a better grip should you need to rip it out of the gun, they have some little dot matrix on them so you can mark your mags, and they have an over-insertion stop on them (which i needed to grind off on some 20 rounders, as they prevented the mags from seating in an early Gen 2 Noveske lower). The gen3 PMAGs also include the little dust cover thingy that gets lost the first time you take it off a mag at the range. The Gen3 mags are supposed to be a better mag in just about every way. But i've bought plenty on Gen 2 PMAGs since the Gen3s came out because i've never had a problem with them in any of my guns and they can be found cheaper. Buy as many as you can for $9 now, and sell them for $50 in a few months.
"It's time to start slapping people." - George Carlin
NRA Life Member | SAF Life Member | FPC Member
ΜΟΛΩΝ ΛΑΒΕ
-
26 September 2016, 11:38 #2028
I saw that, but noticed he made no distinction of the typo. Which was what confused me.
For a very very specific case, Gen 2's will not drop free out of a Tavor while a Gen 3 will. They have slightly different geometries.
Gen 3's also have a small dot matrix near the floorplate if you want to have an ID system for your mags.
The ribbing on Gen 3's, IMO, are much more pronounced than on Gen 2's.
At first glance you might not be able to visually tell the difference, but if you put the two side by side, you'll see the difference.
You have a full case of Gen 3's? A little jealous right now haha
-
26 September 2016, 11:44 #2029
-
26 September 2016, 18:42 #2030
-
26 September 2016, 20:54 #2031
-
26 September 2016, 21:08 #2032
-
26 September 2016, 22:01 #2033
-
27 September 2016, 03:59 #2034
Why can't I be more like cheaper than***t? (Spit)
Every time I get a dozen or so extra mags so I can price gouge, I end up adding them to my personal stash...
#stoopidsoul!There's no "Team" in F**K YOU!
-
27 September 2016, 10:11 #2035
-
27 September 2016, 13:07 #2036
-
28 September 2016, 10:34 #2037
Vltor Vulcan freedom rails from $119.95.
https://www.vltor.com/shop/specials-...-freedom-rail/
-
28 September 2016, 17:39 #2038
Palmetto State Armory has 30 round Gen 2 Sig MPX mags for $49. That's about as cheap as i've seen them.
"It's time to start slapping people." - George Carlin
NRA Life Member | SAF Life Member | FPC Member
ΜΟΛΩΝ ΛΑΒΕ
-
28 September 2016, 19:19 #2039
Great deal from SMOS starting tomorrow and runs through Sunday - all Quad rails are $75 off! Use code: GFYNATION at checkout. If you've been on the fence about one of these, now is your chance!
Graphic Designer
Instagram: @EO3actual
-
28 September 2016, 19:35 #2040
Is that SMOS discount better than the WEVO discount?
I want the cutout quad rail. When is that one releasing?