Results 16 to 24 of 24
Thread: Aimpoint Micro H-2 Sight
-
2 April 2015, 15:29 #16
-
2 April 2015, 15:46 #17
-
2 April 2015, 15:54 #18
-
2 April 2015, 18:08 #19
-
2 April 2015, 18:48 #20
Some thin skins around here.
-
2 April 2015, 21:12 #21
I work in television. I would never have lasted this long with thin skin. :) I hope when the H2 comes out I can get an H1 for a bargain.
Sent from my iPhone using TapatalkFacebook - Marty Callan
-
3 April 2015, 02:36 #22
-
12 May 2015, 05:42 #23
AIMPOINT LAUNCHES NEW MICRO H-2 HUNTING SIGHT
PDF
Chantilly, VA
May 11, 2015
AIMPOINT LAUNCHES NEW MICRO H-2 HUNTING SIGHT
New sight provides additional features and enhanced performance for hunters
Aimpoint, the originator and world leader in electronic red dot sighting
technology for forty years, has announced the addition of the new Micro H-2 sight to the company’s
commercial product line. The Micro H-2 will be available for shipment in August 2015, and will be offered
alongside the company’s existing Micro H-1 product.
Since its introduction in 2007, the Aimpoint Micro sight has become a popular hunting sight worldwide
due to its lightweight and compact size, durability, and extremely long battery life. Product reviews with
hunters and sport shooters identified a series of desired product enhancements that have now been
added to this new product. These changes include: a new sight housing which allows the addition of
front and rear protective flip covers, additional physical protection for the sight’s adjustment turrets, and
increased ruggedness for the sight’s internal electronic components.
The most significant developments in the Micro H-2 however, are the advanced optical lenses that allow
for even better light transmission and provide a noticeable increase in the clarity and performance
properties of the sight. This ensures a more distinct and clearer dot in all conditions and situations.
“The Aimpoint Micro has become the worldwide standard for compact reflex sights” says Matt Swenson,
Vice President of Sales. “With the sight’s new design, the Micro H-2 takes the level of performance
available from a compact sight to an entirely new level.”
The Micro H-2 can be mounted on nearly any rifle, shotgun, handgun or crossbow, and can be used
with most existing mounts that fit the Micro H-1 including the Blaser saddle mount. The sight can also
be mounted to a larger magnified scope with a 30mm or 34mm scope adapter giving the hunter ability
to hunt at both short and long distances while providing faster target acquisition. The Micro H-2 can
operate for up to five years of constant-on use, using just one CR-2032 battery, and is waterproof.
For more information on Aimpoint or the company’s products, visit our webpage at www.aimpoint.com
or contact:
Press contact: Kristi Drawe
Aimpoint, Inc.
(703) 263-9795 ext 226
Kristi.Drawe@aimpoint.com
_________________________________
-
12 May 2015, 05:44 #24
Specs
PDF
APPLICATION AREAS
Hunters Primary use
IPSC Shooters Primary use
Law Enforcement Primary use
APPLICATION FIREARMS
Pistol - Revolver Primary use
Com pound Bow/Cross Bow Primary use
Magnum handgun Primary use
Primary use
Primary use
Primary use
Primary use
Shotgun Primary use
TECHNOLOGY
ACET
OPTICAL DATA
Red dot sight
LED (Light Emitting Diode) Totally eye-safe
Red dot size 2 MOA*
Parallax-free No centering required
Eye relief Unlimited
All surfaces
1X
ELECTRONIC DATA
Battery type One 3V Lithium battery, type CR2032
Battery life 50,000** hours
Dot intensity regulator Mechanical switch
Brightness settings 1 off and 12 daylight settings of which one
extra bright
MECHANICAL DATA
Material housing Extruded high strength aluminum
Anodized, semi-matte
Color Black
Material lens covers Rubber, black, matte
Adjustment 1 click = 13 mm at 100 meters = 1/2” at 100 yards
Mounting solution Integrated Weaver rail mount
ENVIRONMENTAL DATA
Temperature range -30° – +60° C (-20° – +140° F)
Water resistance Submersible to 5 m, (15 ft)
Radioactive components used None
DIMENSIONS
Lenght x width x height (sight only) 68 mm x 41 mm x 36 mm , (2.7”x 1.6”x 1.4”)
Lenght x width x height 77 mm x 42 mm x 46 mm , (3”x 1.6”x 1.8”)
(sight with Mount & Flip-up lens covers)
Width/height - including mount 62 x 41 mm, (2,4” x 1,6”)
Weight - sight only 93 g, (3.3 oz)
Weight sight with integrated mount
& Flip-Covers 136 g, (4.8 oz)