Results 1 to 8 of 8
Thread: 80% lowers - recommendations?
-
26 April 2015, 17:14 #1
80% lowers - recommendations?
Since I should have this 7.62x39 pistol finished very soon (as soon as the tax return gets here), I figured I'd start the next project from an 80% lower receiver just to have done it. Has anybody here milled one out? If so, which receiver did you use? There is a plethora of them out there from polymers to billet. I do have some of the necessary tools and access to what I don't have so, that's not a problem.
Freedom is NEVER Free. We have to work to protect it and even be willing to die to protect it.
-
26 April 2015, 17:20 #2
Most cost effective option in terms of just money:
http://www.rainierarms.com/milsport-...r-receiver-raw
Pricier and Polymer, but easier to finish and comes with the jig:
http://www.rainierarms.com/jmt-gen-2...ceiver-jig-blk
-
26 April 2015, 17:38 #3
I've been looking at those JMT ones. JMT designed and made the ViperJet kits. I kind of figure that since their polymer was strong enough for a jet plane, it's probably strong enough for a lower receiver. The price isn't bad for them either since they come with the jig. I could go with the Milsport forged one and need to find out if they have a jig for it first. Anodizing it at home is easy enough after I've machined it. There are some other companies with forged 80% lower receivers + the jigs... some anodized, some not.
Freedom is NEVER Free. We have to work to protect it and even be willing to die to protect it.
-
26 April 2015, 17:46 #4
My buddies have also had look luck using 80% Arms Lowers.
http://www.weaponevolution.com/forum...Lower-Receiver
For a guy like me that isn't using drill presses on a daily basis, I'd go with the JMT because it does have the jig, and there are some good videos on how to do it.
http://www.weaponevolution.com/forum...uctional-Video
-
26 April 2015, 17:59 #5
The new frontier 80 lowers are pretty aesthetically pleasing. They are the lowers the joe bob Spartan set is built on.
-
27 April 2015, 04:58 #6
I agree the NFA 80's are some of the nicest you can find. Too bad they are nowhere to be found. Been at least 6 months since I have seen any in stock. The billet80's are very nice but a premium on the prices esp. for the 7075 version.
http://billet80.com/index.php?route=...d=80#container
Here is a NFA 80 after completion and coating. A friend of mine has access to a laser engraver so the markings will be going on before assembly. First time I've tried it like that.
-
27 April 2015, 15:35 #7
I was watching the easy jig videos yesterday. Definitely using a router would be the way to go with it. I'd have to buy a router though. The JMT seems like a more cost effective way to go and I do have access to a decent drill press.
Freedom is NEVER Free. We have to work to protect it and even be willing to die to protect it.
-
27 April 2015, 19:19 #8Member
- Join Date
- Apr 2015
- Posts
- 36
- Downloads
- 1
- Uploads
- 0
I've done several www.Billet80.co0m lowers.
i am getting ready to do a www.80percentarms.com lower in a few weeks.
Both being billet and no Rollmarks,.
Roger