Results 466 to 475 of 475
Thread: SMOS Build Thread
-
22 April 2016, 10:58 #466
-
22 April 2016, 12:26 #467
-
22 April 2016, 13:13 #468
Complete the furniture if you're going FDE. Get a Vortex Razor 1-6 and Geissele super precision mount. :)
Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
22 April 2016, 13:27 #469
-
28 April 2016, 14:22 #470
Mini griffin flash hider came, so cute.
Gas block is the last item, waiting to arrive then done! Except optic. Dunno yet.
Sent from my SM-N910V using TapatalkGround Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
28 April 2016, 14:29 #471
-
28 April 2016, 15:05 #472
Oh that's precious lol.
Does it work?-One Nation, Under God
-"The bad news is time flies. The good news is you're the pilot." ~ Michael Althsuler
-
28 April 2016, 15:27 #473New Member
- Join Date
- Apr 2016
- Posts
- 1
- Downloads
- 0
- Uploads
- 0
Hi guys, I hope this is the right place to put this. I just finished a 12.5 inch pistol build using the SMOS 9 inch GFY rail. I wish I could've gone with the GFY Receiver Set but I had already bought the upper and lower. Specs listed below:
Lower:
Anderson Lower
KAK Brace w/ receiver extension
Magpul SL grip
PSA LPK
Seekins Ambi safety
Upper:
ADM 12.5 inch barrel
ADM Forged upper
BCM BCG
BCM Ambi Charging Handle
A2
SMOS GFY Rail
Magpul Pro Sights
Installation was super easy and this rail is hard to beat for 150 bucks. Haven't shot it yet but should this weekend and may give it a poor man's cerakote job (krylon) in a little bit.
-
28 April 2016, 15:43 #474Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
4 May 2016, 16:55 #475
She's slowly coming together! Thanks to rxer311 for the new stock! Also installed a Strike Industries mag catch and Forward Controls polished EMR.
Still need:
Magpul front MBUS
Lantac E-BCG
Lantac/CMC flat trigger
BA 14.5' stainless barrel
FCD polished ABC/R-F
AXTS raptor
Stainless BAD levers
Battlecomp 51.0