Results 1 to 10 of 10
Thread: pic request for Stick
-
7 November 2009, 18:25 #1
Member
- Join Date
- May 2009
- Posts
- 107
- Downloads
- 0
- Uploads
- 0
pic request for Stick
Can I request for pics of the following set-up, if you happen to have them? Tactical Innovations billet lower, Vltor VIS-2A, 10.5 barrel with KX3, Magpul CTR. Pls excuse any inconvenience this may cause. Thanks :)
-
7 November 2009, 19:14 #2
It's just crazy how many configurations Stick can put together--that guy has it all. He may already have something like this posted out there.
- Federalist22
-
7 November 2009, 19:49 #3
Member
- Join Date
- May 2009
- Posts
- 107
- Downloads
- 0
- Uploads
- 0
I did not see it during my search. In his lower receiver guide, The TI lower was paired with another brand. Thanks :)
-
8 November 2009, 13:15 #4
-
8 November 2009, 13:16 #5
-
8 November 2009, 14:09 #6
-
8 November 2009, 15:56 #7
Member
- Join Date
- May 2009
- Posts
- 107
- Downloads
- 0
- Uploads
- 0
-
10 November 2009, 04:37 #8
Member
- Join Date
- May 2009
- Posts
- 107
- Downloads
- 0
- Uploads
- 0
Sir, I keep coming back to these pictures because this is my dream build. But your comment made me realize that there might be a better match for the VIS than the TI lower. Although from the pictures, the finish looks very close to me, I trust your opinion that the VIS is matte and the TI is satin. In this regard, may I know, in your opinion, what lower best matches the VIS? Thank you.
-
10 November 2009, 10:20 #9
My Magpul C series lower matches the best from what I've seen, but thats no real help.
I end up with a rather critical eye, and texture plays a large portion of the visible color game. If it were me, I would contact a dealer, and ask them to check what lowers they had in stock that would match up with the VIS, and go from there.
Lowers can vary with their coloring, so what may be a close match in my image, might be WAY off if you buy one that was done a year or two later. Anodizing with fresh or well used chemicals can be a part of the reason, but so can other things.
The VIS is also built to be tight, so a check by your dealer can also make sure you are good to go on that angle as well.
-
11 November 2009, 01:03 #10
Member
- Join Date
- May 2009
- Posts
- 107
- Downloads
- 0
- Uploads
- 0
Thank you very much for the sound advice. I will keep that in mind when I'm ready :)