Results 1,666 to 1,680 of 2419
Thread: NFA Picture Thread
-
4 July 2017, 11:26 #1666
-
4 July 2017, 11:30 #1667
-
4 July 2017, 13:58 #1668
Spotter duty.
-
6 July 2017, 20:56 #1669
-
7 July 2017, 05:06 #1670
Don't like piggy backing the RMR on the ACOG?
-
7 July 2017, 14:30 #1671
-
7 July 2017, 14:43 #1672
-
7 July 2017, 15:01 #1673
-
7 July 2017, 15:42 #1674
Correct. I ran mine that way on my M4B2 before taking it off (because of rear sight/optic fit). It pushes everything forward and the base creates a nice index point for my thumb. On a more clone note...I basically took Tom Spooner's setup and copied it, except the optic/riser and can (and removing the PEQ, for weight day-to-day). His had a KAC Micro 600m sight, but I grabbed a 300m Micro for "cheap" and will throw it on there...hopefully after USPS delivers it tomorrow.
It's been interesting shooting this. Recoil impulse is "stout," more so than the Adams Arms oprod upper I have, but not terrible. What is terrible is the gas in the face with the suppressor. Recoil is actually fine with the can, and not much different, but it does push a cloud of freedom into your eyes when shooting.Last edited by gatordev; 7 July 2017 at 15:50.
-
8 July 2017, 19:44 #1675
Got some bad news on the 416's. Vented Gas blocks won't just be a swap. We'll be getting a face full of freedom with no relief in sight.
-
8 July 2017, 23:12 #1676
-
9 July 2017, 02:50 #1677
Charging handle. Use a low back pressure can and it'll help. 30 caliber or Surefire/Dead Air.
Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
9 July 2017, 08:17 #1678
Can IGF not work with the existing gas block? I haven't sent him an email to ask yet, but from the page, it seems like it might be an option.
I'll have to try my SF 762 Mini, but the 556 RC was still creating a cloud (not exaggerating) of freedom.
-
10 July 2017, 09:30 #1679
-
11 July 2017, 17:51 #1680