Results 1 to 9 of 9
-
18 February 2019, 20:59 #1
Geissele Rails and CMT upper compatability
Anyone mate the two? I’m looking into the MK8 or MK14 for my next build. I’ve got the upper, and it looks similar enough to my forged upper, but I’m wondering if anyone has tried the combination of the two.
Thanks
-
19 February 2019, 04:15 #2
I ran a MK14 on a FCD/CMT upper and had no problems.
Last edited by DISCOM; 19 February 2019 at 04:22.
“Fast is fine, But accuracy is final.” Wyatt Earp
-
19 February 2019, 07:42 #3
Perfect. Thanks for the pic DISCOM. Now to make the final disunion between the MK8 or MK14.
-
19 February 2019, 08:16 #4
I have shot both and still own both. IMO MK14 is the way to go but, that's your call and a tough decision.
“Fast is fine, But accuracy is final.” Wyatt Earp
-
19 February 2019, 09:04 #5
Matches up to that NTD lower better than I thought it would.
-
19 February 2019, 09:59 #6
-
19 February 2019, 10:43 #7
-
19 February 2019, 11:22 #8Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
23 November 2019, 07:22 #9New Member
- Join Date
- Nov 2019
- Posts
- 15
- Downloads
- 0
- Uploads
- 0
Can't go wrong with a mk4/mk8 or mk13/mk14 on the FDC/CMT. Not as big a fan of the newer mk16 rails. Not sure if a mk16 would even fit the FDC/CMT upper given the alignment tabs. Would be curious to hear if anyone has tried to fit a Mk16 rail on FDC/CMT upper?