Results 1 to 12 of 12
Thread: Silencerco MAAD mounts?
-
13 November 2020, 09:01 #1Senior Member
- Join Date
- May 2013
- Posts
- 820
- Downloads
- 0
- Uploads
- 0
Silencerco MAAD mounts?
I have an older Silencerco Saker (my only can) with the MAAD mount system. Looks like the flash hiders and comps with the MAAD mount are discontinued. Still need them going forward. Anybody have a stash or know of a way to get ahold of at least one?
-
13 November 2020, 10:36 #2
Not sure but you can also consider doing what Former11b did here:
http://www.weaponevolution.com/forum...threads-Plan-A
-
13 November 2020, 10:40 #3
While I am not familiar with your suppressor at all something like this from these guys (or someone else) might be a good option.
https://www.griffinarmament.com/plan...s/#description
-
13 November 2020, 10:53 #4
This one says it's compatible with the Saker. I don't know anything at all about those mounts though.
https://www.griffinarmament.com/plan...r-suppressors/
-
13 November 2020, 11:02 #5Senior Member
- Join Date
- May 2013
- Posts
- 820
- Downloads
- 0
- Uploads
- 0
-
13 November 2020, 11:21 #6
MAAD mounts suck.
Cost/Benefit you can swap your Saker to a Keymo mount. Even at minimum go with the ASR mount.
-
13 November 2020, 17:54 #7
I’m not real familiar with that can
Does it have the 1.375" X 24 threads in the can?
If so then you have quite a few options
Dead air
Griffin
Yhm
Hellfire
Jmac
And more
-
13 November 2020, 19:21 #8
If you insist on staying with MAAD Mounts, I just checked some stock. I have 3 MAAD muzzle devices.
1 FH 1/2x28
1 Brake 1/2x28
1 Brake (Noveske Marked) 5/8x24
-
16 November 2020, 08:19 #9Senior Member
- Join Date
- May 2013
- Posts
- 820
- Downloads
- 0
- Uploads
- 0
Thanks. I might take those off your hands. Let me know what you would like for them.
In any case I will have to eventually make a change.
-
8 December 2020, 16:44 #10Member
- Join Date
- Oct 2014
- Posts
- 21
- Downloads
- 0
- Uploads
- 0
-
8 December 2020, 18:49 #11LEO / MIL
- Join Date
- Jul 2013
- Posts
- 845
- Downloads
- 0
- Uploads
- 0
Some years ago I had a problem with a MAAD mount. I contacted SiCo and was sent a ASR mount for free.
-
8 December 2020, 20:22 #12Senior Member
- Join Date
- May 2013
- Posts
- 820
- Downloads
- 0
- Uploads
- 0