Son of A &#!@

[Stone]

You might also want to keep them a little on the stiff side after fixing so you dont have feeding issues. Study the spring for a few minutes and find out if its better to cut the top of it that goes under the follower or the bottom end. Im guessing its better to trim the bottom.... I would also compare the spring to a WC and CMC spring to see if its to long or too strong. Just another mental reference point before you start trimming... Piece of cake brother!! Not all springs are created equal, I have watched guys change buffer weights all over the place because of gassing issues only to find out that $5 bottom of the barrel buffer spring was out of spec. There is a reason people use quality springs like the geissele buffer spring, Wolff springs, WC springs, JP springs etc,etc....