Quote Originally Posted by FortTom View Post
Got mine for a G19 Gen 3 from Brownells. Got a great deal on a special code offer of 320 plus tax and shipping. Just found out it was being shipped today.

So I'm taking a like new Gen 3 19 and adding:
Tru Glo night sights
Zev Pro-Connecter (just to remove the bump and slick up the pull without getting light and getting into liability issues)
Glock Store Tungsten recoil rod with 18lb. spring
and finally the Radian system, when it gets here from Brownells.

Will just set here and do it all in one shot, and report findings, however I don't have any scientific way to produce actual advertised reduction numbers, will just test 115gn to 147gn loads and give my percieved reduction. Target shots with stock barrell and no comp vs. guide rod and Radian system will have to be my guide, plus "percieved" recoil and muzzle flip perception.

FT
If you have a shot timer you can do the pepsi challenge without and then with afterwards, then compare.

When I used to have the PMM single port on my G17, there was definitely a noticeable difference. Trying to find a holster was a pain, in the end I sold it and then bought a Zev RMR cut slide because they stopped making the 17 MOS Gen 5 and all I had was a 17 non MOS and I don't send slides out to be milled. I plan on getting the tungsten rod for it at some point, but it's already flatter than my 45 IMO, there's definitely a difference between rod and spring size.