Results 16 to 30 of 138
Thread: MEGA Arms Wedge Lock Handguard
-
22 January 2015, 22:31 #16
Handled these today. They are awesome. Also very slim, like a centurion cmr. Another nice touch is a single 45 degree mlok slot at the front on each side.
Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
26 January 2015, 17:35 #17
-
26 January 2015, 20:07 #18New Member
- Join Date
- Jul 2010
- Posts
- 8
- Downloads
- 0
- Uploads
- 0
Oh boy, how long have I wished for a superlightweight ar10 rail.
-
28 January 2015, 17:00 #19
and I see the ridiculous length. Now I must know, what is the inner diameter? Cause this could be the winner for my build if it's 1.5". Most likely not though.
Sent from my iPhone using Tapatalk
-
28 January 2015, 18:06 #20
Off of Megas facebook page
What length hand guards are we planning to offer the Wedge lock hand guard in and what will they cost? Glad you asked!
5 lenghts planned:
Carbine = 7 inches, $249 (all prices are MSRP)
Mid length = 9 inches, $272
Rifle length = 12 inches, $295
Extended Rifle lenght = 14 inches, $326
Mega Extended = 16 inches, 357
-
28 January 2015, 19:02 #21
-
29 January 2015, 16:15 #22
-
29 January 2015, 16:21 #23
Damn that is skinny
Guess no guys with cans will be running just the rail..
-
29 January 2015, 16:36 #24
Nooooooooooo. Well back to the drawing bored. Was so praying too.
Sent from my iPhone using Tapatalk
-
29 January 2015, 23:59 #25Senior Member
- Join Date
- Jul 2013
- Location
- Bentonville,AR
- Posts
- 783
- Downloads
- 0
- Uploads
- 0
It was not designed for users who want to run cans inside the rail. Everything about the rifle it was designed for is geared toward "hard" use.
-
30 January 2015, 03:13 #26
-
30 January 2015, 04:26 #27
With an inner diameter of 1.225" a lot of gas blocks may not fit. The thinner these rails get it makes me think of the old Burger King commercial.
-
30 January 2015, 09:22 #28Senior Member
- Join Date
- Jul 2013
- Location
- Bentonville,AR
- Posts
- 783
- Downloads
- 0
- Uploads
- 0
-
15 March 2015, 17:54 #29
-
15 March 2015, 19:50 #30