Results 31 to 36 of 36
Thread: .300 BLK Pistol Build
-
2 February 2015, 15:54 #31
I submitted a form 1 on 1/29 now the wait begins .
I'm building a 8.5 in 300 blackout and wondered if anyone had any input on my build , here is my upper spec list so far .
Bison Armory 8.5 in 300blk barrel
SilencerCo Saker Trifecta Muzzle Brake
V7 Extreme Environment Gas Tube
V7 Titanium Gas Block
Stag Left Hand BCG ....not sure if I'm going with the nickel teflon or going with the basic and sending it out to get titanium nitrided
CMT UPUR-1LH Left Hand Upper if they ever come back in stock
SSS Gas Vent to replace the forward assist
Charging Handle undecided suggestions welcome
7in Keymod Rail not sure which one I'm hoping BCM releases a KMR7, suggestions welcome
Vortex SPARC w/ a LaRue LT751 Mount .
-
2 February 2015, 16:49 #32Senior Member
- Join Date
- Sep 2014
- Posts
- 556
- Downloads
- 0
- Uploads
- 0
Sounds like a nice build. Specs on the bbl?
Sent from my iPhone using Tapatalk
-
2 February 2015, 17:04 #33
.300 BLK Pistol Build
Definitely a nice build. Bison makes a good barrel! All the listed components look good and will make for a very nice build.
As far as CH, of course, I recommend the raptor especially since your a southpaw( I shoot left) it looks like lol. I have the new mega CH but haven't really used it but initial impressions are good.
I went with a 7" force rail on my 300blk build with the AAC adapter. Can provide pics if you want but I think there are some up here of it.
Here's the barrel he talking about http://bisonarmory.com/8-5-300-blackout-pistol-barrel/.
Bison makes good barrels. I had a 18" 6.8 that was a shooter no doubt.
-
2 February 2015, 17:08 #34Senior Member
- Join Date
- Sep 2014
- Posts
- 556
- Downloads
- 0
- Uploads
- 0
Yeah Ive seen a lot of happy Bison 6.8 owners
Sent from my iPhone using Tapatalk
-
13 February 2015, 06:53 #35
I've put just under 300 rounds through my pistol now and am really enjoying it. Flawless operation so far.
I added a ZeroBravo handstop to help ensure I don't but a hole in my hand, added a BCM keymod QD mount on the handguard so I can run a 2-pt sling (have the Noveske QD endplate) and added a stabilizing brace to assist with my one-handed operation of this large pistol.
I was happy when I went to sight in the MBUS and my first three shots looked like this (at 60 feet):
I did play around with my PST 1-4 but haven't had a chance to really put the barrel through its paces at 100 yards. However, I mentioned before that the purpose of the build is really for home defense, and this what it can do with a PA Micro red dot at 20 feet:
That is two 5-shot groups. The one on the left is mine. The one on the right is my wife's. So, again, at CQB range I can put rounds in the same hole.
I expect I'll file a Form 1 in a few months...need to set up the trust first.
-
13 February 2015, 07:34 #36
The moral of the story here kids is... don't Piss of your wife Boiler...