Results 16 to 30 of 53
-
8 April 2015, 11:56 #16
I'm surprised to see the BAD listed, but at least it's consistent across the three carbines. When it first came out there was a lot of excitement over the BAD, but like many other bolt-on goodies, were later removed. Reasons seemed to include function issues and trying to run the BAD on one gun, but a standard setup on others, causing an award learning curve.
-
8 April 2015, 12:12 #17
Thanks for sharing. This is very interesting and I look forward to reading your blog, as well.
Sent from my iPhone using TapatalkFacebook - Marty Callan
-
8 April 2015, 12:42 #18
Yep, I've been on the BAD wagon since earlier than probably anyone else. I had one of the 5 prototypes that Travis handed out before he even joined Magpul. I've been using them ever since, on and off.
Putting everything else aside, with the Redimag the BAD is almost a necessity for me, so adding it to the other two guns seems logical.WWW.TACTICALYELLOWVISOR.NET
-
8 April 2015, 14:39 #19
You're going to love the BCM 11.5". Mine is almost identical, just a normal barrel since I got it before the ELW was out. The 10" KMR is just right, even for my monkey arms. It's probably my favorite "fun" upper, and I use it about half the time suppressed. At my last family gathering it was the favorite, especially among the women, who liked the light weight (without the can, of course).
Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
8 April 2015, 17:55 #20
You have great taste in gear, good-luck with them Rob
-
8 April 2015, 19:19 #21
Since I've been suppressor shopping lately have you looked at the Griffin Armament Recce 7? It will do all that you want, the mount seems more solid, and it will save you around $200 bucks or more when you factor in muzzle devices. Griffin includes one but for the Omega you have to buy them separate.
I figure it's about $240 cheaper to go with Griffin and they seem very solid. Plus each muzzle device is interchangeable across calibers. So you can have a .223 taper mount and a .308 taper mount and it's no difference.
More comments/thoughts to come as I read more and think about it....Last edited by alamo5000; 8 April 2015 at 19:26.
-
9 April 2015, 00:59 #22
Good stuff. I'm looking forward to reading more as things progress.
-
9 April 2015, 02:20 #23
Street price for the Omega is $880, and it comes with one mount.
http://www.silencershop.com/silencer...mega-7-62.html
They also have both brake and hider mounts, available in both 5.56 and 7,62 thread pitches. And they don't require thread protectors, I don't believe.
http://www.silencershop.com/accessor...zle-brake.html
http://www.silencershop.com/accessor...ash-hider.html
Finally, the Griffin is 7.6" long and 19 oz vs the Omega's 7.09" and 14 oz.WWW.TACTICALYELLOWVISOR.NET
-
9 April 2015, 04:21 #24
Careful on the omega weights. It's 14 oz with direct thread. Add a few more for the ASR mount (plus the muzzle device weight). There was a post on arf where silencershop listed all the different combinations with the end caps and mounts.
Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
9 April 2015, 04:57 #25
Thanks for the heads up. Looks like I'm good through. The muzzle device is a net-zero to me since the gun(s) will have some sort of optimal device on them regardless (hiders where hiders make sense, brakes where brakes make sense). I think this is the breakdown youre referring to. I think the red/bold I indicate below is the configuration I'll have.
11.3oz without any mount and anchor brake installed
13.5oz with direct thread mount and anchor brake installed
14.8oz with the ASR Mount not including muzzle device and anchor brake installed
1.5oz weight of the anchor brake
2.2oz weight of the direct thread
3.4oz weight of the ASR
3.4oz weight of the muzzle brake
ETA: weight totals per configuration
Omega can + direct thread mount + anchor break (end cap/break) = 13.5 oz.
Omega can + ASR mount + anchor beak (end cap/brake) = 14.8 oz.WWW.TACTICALYELLOWVISOR.NET
-
9 April 2015, 06:37 #26
-
9 April 2015, 07:55 #27
Not yet but its not from a lack of trying. I've read and looked up ad researched quite a bit though. I've talked to about 5 owners and 3 people at two major dealers. The comments from the guys at the dealers were "one of the best ones we carry" to "this is what I use on all my personal guns" "its great" and other people would tell me similar things....and they had absolutely no skin in the game whatsoever. One guy said "I would put this up against anything on the market" et etc....and basically the consensus is that its a steal. Given I was asking g about the Recce 5 but most of them had the same sentiments about the recce line as a whole and they said so.
I'm pretty OCD about stuff sometimes but I've heard enough to make up my mind and give it a try. I would have already paid for it but they are on backorder and I don't want to get one from out of state and have months more wait time.
-
9 April 2015, 08:22 #28
-
9 April 2015, 08:28 #29
-
9 April 2015, 10:31 #30
Note to self: Jock itch is a "no-go!" This is why I love this forum. I'm always learning. :p
Sent from my iPhone using TapatalkFacebook - Marty Callan