Activity Stream

Mine is also unmarked.

Mine unscrewed once, I cleaned the threads, and applied rockset no problem since. It those were the days of carbon locking on the asr. Not an issue...

The one that came with my mars-l lower was unmarked.

That would be helpful. It would at least give me an idea.

And they’re actually harder to see under NVGs...at least green tube Gen 1-3. Haven’t used white phosphor or the Quad tubes. Black rifles contrast...

I am just dumb. That was from another post for a raptor CH. Getting rid of that.

I use a large-holed laundry bag for mine and I like it better than the fishing net sized pattern. I agree it helps with the contrast and makes it...

I’ve never tried to accelerate the wear on a paint job. Naturally earned wear can’t be replicated quite the same I’ve already done a mesh laundry...

Shoooooot. Not gonna mix them up

The P365XL grip is slightly longer and with a flush mag holds 12+1 rounds, versus the original P365 holding 10+1 with a flush mag. I'll upload a...

Not sure I understand the last two lines of the post.

There are other ways (and other places to put the serial #) if that is the concern. Avoiding welds and using glue for weight savings isn’t my...

There are other ways (and other places to put the serial #) if that is the concern. Avoiding welds and using glue for weight savings isn’t my...

Sure looks like it. I’m assuming it makes core repair easier by removing the serialized shell.

Part of the reason why I posted this thread is to get a broader consensus than just me. More eyes and ears open never hurts.

Give it time.

That one has been out about six months for consumer purchase.

Good advice, thanks! If I had 2 boxes, I would definitely shoot some of this. I think I will check those collectors sites, just to see what value...

None. I'm past my Operator Prime. But I do have issues with hearing pro getting knocked off my ear, so I'm trying this out to see if it helps, or...

It's only been out a couple weeks. Give it time.

Same, also waiting on the hot button. Wish there was an ETA.

Some steel wool and scotchbrites along with some oil is a way to do it. Then "seal" it with a clear coat for corrosion protection if that's your...

lol peq2 would be cool. But the LMT SOPMOD was a little out of budget at the moment as I had to buy some new gear. Planning on shooting my Rainier...

I figured you'd be the expert when it comes to actual clone paint schemes! Personally when it comes to clones, I like them black, but beat up...

This doesn’t have a glued outer tube does it

I'd just keep it, as a collectible. You can buy 180 gr. JHP anywhere, so since (caliber wise) it's not unique it has collectors value. Google some...

What kind of NODs are you running with that mount?

Nice...I’m waiting on their “button”.