WEVO Members Testing & Evaluation Program

[Naytwan]

Dang! Who makes that end plate?

Damage industries.

[GOST]

Dang! Who makes that end plate?

Troy also makes a end plate similar to that one.

https://www.primaryarms.com/Troy_OEM_M4_Sling_Mount_p/smou-m4s-00bt-00.htm

[Ride4frnt]

In my experience, which is admittedly limited, damage has some damn good parts for damn good pricing. I'm really stuck on their ambi 45 degree selectors right now.

[Thompson]

In my experience, which is admittedly limited, damage has some damn good parts for damn good pricing. I'm really stuck on their ambi 45 degree selectors right now.
Have you had any experience with their various parts kits? Been thinking about buying a couple to throw in the parts bin, in case I need to switch out parts or whatever.

[cjd3]

This is a pretty big thread, but I'd like to get in line for the 50k red dot. Thanks.

[UWone77]

The 2.5x Optic is available again.

[Ride4frnt]

The 2.5x Optic is available again.

Thought they were being sent back to PA? I'd be willing to try it out on my 14.5

[UWone77]

Thought they were being sent back to PA? I'd be willing to try it out on my 14.5

Well... yes you will then!

PM me your address again... I should probably just write this stuff down. [BD]

[Ride4frnt]

Well... yes you will then!

PM me your address again... I should probably just write this stuff down. [BD]

Haha. A WEVO Rolodex would be nice.

[Dstrbdmedic167]

Ohh I've been toying with it and haven't even cleared it yet. As soon as I get my rifle back from Blowndeadline and ride uses it. I will be donating a Arisaka leveler to the T&E program. Would like it back at some point possibly but I'll probably end up buying another anyway. I'll let UW dictate who it goes to after Ride. A small way of giving back.

[Ride4frnt]

Ohh I've been toying with it and haven't even cleared it yet. As soon as I get my rifle back from Blowndeadline and Rife get used it. I will be donating a Arisaka leveler to the T&E program. Would like it back at some point possibly but I'll probably end up buying another anyway. I'll let UW dictate who it goes to after Ride. A small way of giving back.

And I shall ship it to whomever wants it after me the day after I get it.

[CK 187]

I got my Magpod in the mail while i was gone on business. Eager to give it a shot

[CK 187]

The 2.5x Optic is available again.


Thought they were being sent back to PA? I'd be willing to try it out on my 14.5


Well... yes you will then!


That's cool. They should definitely get some good testing in across several members at this rate.

Throw my name in line for one of them if they free up UW

[velocity2006]

Still down to photo/video anything you want to send my way.

[Pyzik]

And I shall ship it to whomever wants it after me the day after I get it.
Looking forward to your thoughts. I'm still not sure if this 1-4x is for me.

[alamo5000]

Looking forward to your thoughts. I'm still not sure if this 1-4x is for me.

Which 1-4 do you have and what is it on?

[Pyzik]

Which 1-4 do you have and what is it on?
Bushnell PLC illuminated. On the Troy 16" upper.

[alamo5000]

Bushnell PLC illuminated. On the Troy 16" upper.

I had the bushnell throwdown and I upgraded to a vortex viper pst 1-4x. I was going to do a small write up on them both and share my opinions.

What has you guessing and second guessing the PLC? I am curious as to your opinion.

[Pyzik]

I had the bushnell throwdown and I upgraded to a vortex viper pst 1-4x. I was going to do a small write up on them both and share my opinions.

What has you guessing and second guessing the PLC? I am curious as to your opinion.
It's heavy. Do I really need a variable?
Thinking maybe a fixed power if I can shave enough weight.

[alamo5000]

It's heavy. Do I really need a variable?
Thinking maybe a fixed power if I can shave enough weight.

At what ranges are you normally shooting? (Distance wise)

[Pyzik]

100. I don't have a place to shoot further yet. :(

[alamo5000]

100. I don't have a place to shoot further yet. :(

After shooting a bit I am a big fan of variable optics. At 100 yards and in though you have a lot of different options. I have pretty much done a research project on this subject recently.

Are you shooting steel targets? Trying to get groups? What kind of shooting to you do or like?

As I have said--I have recently done a ton of research on various optical choices....

[Pyzik]

"Battle accuracy". 1moa would be awesome. 2moa would be acceptable.

I need to go again not that it's not brutally cold & windy and see how I can do.

[alamo5000]

"Battle accuracy". 1moa would be awesome. 2moa would be acceptable.

I need to go again not that it's not brutally cold & windy and see how I can do.

It was like 75 degrees here today...[:D]

1 MOA is not battle accuracy LOL Hitting an 8 or 10 inch plate at 100 yards is battle accuracy. [BD]

With that same scope you have I shot around a 1/2 inch group at 100 yards with off the shelf ammo.

I would consider getting a nice red dot and possibly a magnifier. 1x red dot with a QD magnifier.

What were you thinking about as other options?

[Pyzik]

It was like 75 degrees here today...[:D]

1 MOA is not battle accuracy LOL Hitting an 8 or 10 inch plate at 100 yards is battle accuracy. [BD]

With that same scope you have I shot around a 1/2 inch group at 100 yards with off the shelf ammo.

I would consider getting a nice red dot and possibly a magnifier. 1x red dot with a QD magnifier.

What were you thinking about as other options?
Hahaha, the battle accuracy was supposed to be sarcasm.

I decided against an RDS & magnifier.
I've just been considering something fixed power like an ACOG knockoff or something.

[UWone77]

Is anyone building a precision upper in need of a barrel? If so, post a picture of your parts. I'll leave this up for a bit and see where we're at with someone close to finishing a precision/semi-precision upper.

[JHoward]

OH MY GOD why do you keep doing this to me?????????????

[JHoward]

The moment my builds are done.

However, I'm in dire need of a good optic............

Can I get on the list for the PA 1-6?

I am looking at Vortex, but I'm easily pleased.

[alamo5000]

Is anyone building a precision upper in need of a barrel? If so, post a picture of your parts. I'll leave this up for a bit and see where we're at with someone close to finishing a precision/semi-precision upper.

ME! ME!

But I don't have pics yet. Stuff is not here (yet).

[Dstrbdmedic167]

I've gotten enough goodies however. I don't think I'm gonna use a dedicated Lower for the WLV. So who knows what it'll turn into...

[Computalotapus]

What started as the AR-47 build for my youngest to use for hunting came to a halt. She went and participated in our clubs youth precision shoot in the semi-auto class using my NTD build. She has decided that she wants to compete in that division and wants to repurpose what we had already collected to go towards building a precision rig. With race season starting in April the funds to finish this will start to flow in.

Parts list to finish this out is:
Rainier Arms Precision Match Grade Phosphate BCG (will be ordered 1 May)
Rainier Arms / Mega AR-15 Slide Lock Charging Handle (will be ordered 17 April)
Iron Viper Tear Drop Forward Assist (will be ordered 17 April)
MI LW M-LOK 15" FF Rail (will be orderd 10 April)
Ultra Match Grade 16" Barrel (will be ordered 22 May)
Rainier Arms RAC (will be ordered on 17 April)
Vortex Viper HS 2.5-10x44 w/ Dead-Hold BDC Reticle (Ordered)

http://www.infinityholsters.com/images/maddiebuild.jpg


The great thing about this rig not becoming a hunting rifle is now I get to build a Remington 700 for hunting that she will use for hunting.

[Ride4frnt]

What started as the AR-47 build for my youngest to use for hunting came to a halt. She went and participated in our clubs youth precision shoot in the semi-auto class using my NTD build. She has decided that she wants to compete in that division and wants to repurpose what we had already collected to go towards building a precision rig. With race season starting in April the funds to finish this will start to flow in.

Parts list to finish this out is:
Rainier Arms Precision Match Grade Phosphate BCG (will be ordered 1 May)
Rainier Arms / Mega AR-15 Slide Lock Charging Handle (will be ordered 17 April)
Iron Viper Tear Drop Forward Assist (will be ordered 17 April)
MI LW M-LOK 15" FF Rail (will be orderd 10 April)
Ultra Match Grade 16" Barrel (will be ordered 22 May)
Rainier Arms RAC (will be ordered on 17 April)
Vortex Viper HS 2.5-10x44 w/ Dead-Hold BDC Reticle (Ordered)

http://www.infinityholsters.com/images/maddiebuild.jpg


The great thing about this rig not becoming a hunting rifle is now I get to build a Remington 700 for hunting that she will use for hunting.

The silver lining. My next gun will be a .308 bolt unless I happen into some super sweet AR deals

[Thompson]

What started as the AR-47 build for my youngest to use for hunting came to a halt. She went and participated in our clubs youth precision shoot in the semi-auto class using my NTD build. She has decided that she wants to compete in that division and wants to repurpose what we had already collected to go towards building a precision rig. With race season starting in April the funds to finish this will start to flow in.
That's awesome Comp! All the best to her this season!

[Computalotapus]

That's awesome Comp! All the best to her this season!

Thanks. It is awesome to see her ringing still silhouettes out to 300 yards with a rifle that was built for 100 yard engagements. She must have got her shooting skill from her momma.

[Thompson]

Thanks. It is awesome to see her ringing still silhouettes out to 300 yards with a rifle that was built for 100 yard engagements. She must have got her shooting skill from her momma.
Nice. That's some good stuff there. Hey, maybe one day she'll be the next TacTissy, Janna Reeves, or someone.

[Dstrbdmedic167]

http://i1291.photobucket.com/albums/b548/Dstrbdmedic167/DPMS%20Build_zpsxgdjgfe5.jpg

"Comp posted" (get it) his so ill post mine. This was gonna be my wlv SBR but new direction after a error on the websites part on the form 1. So ill probably redirect this to something else and do an upper for the wlv to go with my 12.5 SBR I already have.

[DutyUse]

What started as the AR-47 build for my youngest to use for hunting came to a halt. She went and participated in our clubs youth precision shoot in the semi-auto class using my NTD build. She has decided that she wants to compete in that division and wants to repurpose what we had already collected to go towards building a precision rig. With race season starting in April the funds to finish this will start to flow in.

Parts list to finish this out is:
Rainier Arms Precision Match Grade Phosphate BCG (will be ordered 1 May)
Rainier Arms / Mega AR-15 Slide Lock Charging Handle (will be ordered 17 April)
Iron Viper Tear Drop Forward Assist (will be ordered 17 April)
MI LW M-LOK 15" FF Rail (will be orderd 10 April)
Ultra Match Grade 16" Barrel (will be ordered 22 May)
Rainier Arms RAC (will be ordered on 17 April)
Vortex Viper HS 2.5-10x44 w/ Dead-Hold BDC Reticle (Ordered)

http://www.infinityholsters.com/images/maddiebuild.jpg


The great thing about this rig not becoming a hunting rifle is now I get to build a Remington 700 for hunting that she will use for hunting.

Awesome bro. Glad to see you and the fam enjoying the shooting sports together! That's what it's all about, can't wait till I'm in your shoes :)


Sent from my iPhone using Tapatalk

[mustangfreek]

Whats up comp....Sounds like you have been busy......Sounds like a nice list

[Computalotapus]

QUOTE=DutyUse;97776]Awesome bro. Glad to see you and the fam enjoying the shooting sports together! That's what it's all about, can't wait till I'm in your shoes :)

Sent from my iPhone using Tapatalk[/QUOTE]

Thanks brother


Whats up comp....Sounds like you have been busy......Sounds like a nice list


The wife and I made a commitment that this year we are getting in shape, going to train and shoot more. I am down 15lbs and she is down over 25lbs. Eating healthier, exercising right, feeling better about ourselves.

Between work, family, and holsters not a lot of free time. Race season is going to take up Friday nights. Once a month we hit the range and run concealed carry drills. Now with the girls getting into shooting hopefully we can spend a little more time at the range each month.

[CK 187]

I guess i'll do a dual T&E on the MagPod and the new optic when it arrives.

Double the abuse!!!

[CK 187]

Race season is going to take up Friday nights

Off topic but, what race season?

[GOST]

The wife and I made a commitment that this year we are getting in shape, going to train and shoot more. I am down 15lbs and she is down over 25lbs. Eating healthier, exercising right, feeling better about ourselves.

Between work, family, and holsters not a lot of free time. Race season is going to take up Friday nights. Once a month we hit the range and run concealed carry drills. Now with the girls getting into shooting hopefully we can spend a little more time at the range each month.

About the same here, my wife has me on a diet and I'm down 25lbs. She thinks she's gonna get me into skinny jeans, she's lost her mind. Can't wait for my girls get a little older. The oldest already has the itch, but she's just 5. I told her when she's 7 she can start shooting. Do you work at dirt track?

[SINNER]

Is anyone building a precision upper in need of a barrel? If so, post a picture of your parts. I'll leave this up for a bit and see where we're at with someone close to finishing a precision/semi-precision upper.

I will play this game. LOL. Aero M4E1 with a NFA 80% lower. I purchased the rail for next to nothing during a sale and honestly I am amazed I got the Cerakote on the upper and lower to match so well. No real plans as to what barrel I'd use or even caliber this would wind up being.

http://i1167.photobucket.com/albums/q638/DonaldFink1/image.jpg1_zpswrhucagc.jpg

http://i1167.photobucket.com/albums/q638/DonaldFink1/image.jpg2_zpsmhuawjz8.jpg

[GOST]

That's a great looking start.

[Computalotapus]

Off topic but, what race season?


About the same here, my wife has me on a diet and I'm down 25lbs. She thinks she's gonna get me into skinny jeans, she's lost her mind. Can't wait for my girls get a little older. The oldest already has the itch, but she's just 5. I told her when she's 7 she can start shooting. Do you work at dirt track?

Dirt track racing. Local track here and the last couple of years I have been pretending to be the race director while Christina does all the social media updates

[GOST]

There used to be a dirt track less than a mile from house, it was the Atomic Speedway. It's gone now, been replaced by a trucking company but there's still a motocross track there.

[SINNER]

That's a great looking start.

Thank you! Been wanting to play with the dark bronze color and was stuck at the house for a few days due to weather. That and the S&W above it were the end result. S&W is a friend's who wanted a little color on it. That one is coyote tan.

[Ride4frnt]

There used to be a dirt track less than a mile from house, it was the Atomic Speedway. It's gone now, been replaced by a trucking company but there's still a motocross track there.

Bet that was a loud one. I'm about 5 miles from the track here and it'll keep you up all night. It's a pretty busy track though. Late models, sprints, monster trucks, ama flat track...

[GOST]

I was pretty loud but you got used to it pretty quick.

[UWone77]

I will play this game. LOL. Aero M4E1 with a NFA 80% lower. I purchased the rail for next to nothing during a sale and honestly I am amazed I got the Cerakote on the upper and lower to match so well. No real plans as to what barrel I'd use or even caliber this would wind up being.




SINNER,

That looks great man. It's too bad you already got those cerakoted, I think you would have been prime to T&E a Gen 2 Aero Lower to match that upper. [:D]

[MonkeyBomb]

Where are we putting the T&E reviews. It's time to throw my review into the ring.

[Pyzik]

Where are we putting the T&E reviews. It's time to throw my review into the ring.

http://www.weaponevolution.com/forum/forumdisplay.php?30-Member-Submitted-Reviews

[UWone77]

Comp, I sent you a Rainier Arms / Rock Creek 16" Barrel with Rifle Gas. It may need to be tuned a little to get it running 100%, but if it doesn't let me know.

[Ride4frnt]

Comp, I sent you a Rainier Arms / Rock Creek 16" Barrel with Rifle Gas. It may need to be tuned a little to get it running 100%, but if it doesn't let me know.

Good score comp! I need to build a 16" upper. Really contemplating selling my blackout.

[UWone77]

alamo, if you're reading, I have an 18" side charger that needs to be tested out with a varmit barrel. Perfect for hogs or yotes.

[Pyzik]

alamo, if you're reading, I have an 18" side charger that needs to be tested out with a varmit barrel. Perfect for hogs or yotes.
Oooh nice

[toolboxluis00200]

alamo, if you're reading, I have an 18" side charger that needs to be tested out with a varmit barrel. Perfect for hogs or yotes.

lucky you alamo

[Computalotapus]

Comp, I sent you a Rainier Arms / Rock Creek 16" Barrel with Rifle Gas. It may need to be tuned a little to get it running 100%, but if it doesn't let me know.

Sweet! As soon as my daughter gets back from spending the night with her friends over spring break I will let her know. Thank you so much UWone77, please be sure to let everyone involved know that I really appreciate this.

[alamo5000]

alamo, if you're reading, I have an 18" side charger that needs to be tested out with a varmit barrel. Perfect for hogs or yotes.

I'm in! [:D]

On it like white on rice. LOL

And thank you!

[UWone77]

Sweet! As soon as my daughter gets back from spending the night with her friends over spring break I will let her know. Thank you so much UWone77, please be sure to let everyone involved know that I really appreciate this.

Yeah, and there might be a couple of other items in there that was originally on your list ... [:D]

BUT... I need a range report, especially groups!

[GOST]

Sweet! As soon as my daughter gets back from spending the night with her friends over spring break I will let her know. Thank you so much UWone77, please be sure to let everyone involved know that I really appreciate this.


Yeah, and there might be a couple of other items in there that was originally on your list ... [:D]

BUT... I need a range report, especially groups!
This rocks, it's like Christmas in early spring.

[mustangfreek]

Comp, I sent you a Rainier Arms / Rock Creek 16" Barrel with Rifle Gas. It may need to be tuned a little to get it running 100%, but if it doesn't let me know.


alamo, if you're reading, I have an 18" side charger that needs to be tested out with a varmit barrel. Perfect for hogs or yotes.


This rocks, it's like Christmas in early spring.


It is gost..UW, is one hell of a guy, and even though he'll shake it off and call me ginger names.....[BD]....... hes a good dood, and im proud to call him a friend..He has helped me and tons of others out..

Wish i could pay you back, but you have 2 of everything already..lol....just playin buddy...anyways...Good on you and comp and alamo..will need reports

Anyways....carry on...[:D]

[toolboxluis00200]

i am game for a Scope right now[BD][BD]

[DutyUse]

Grats guys! That's awesome of you UW. This community rocks :D


Sent from my iPhone using Tapatalk

[alamo5000]

he'll shake it off and call me ginger names.....[BD]

http://www.slightlyqualified.com/wp-content/uploads/2014/05/ginger5.jpg

[Pyzik]

http://www.slightlyqualified.com/wp-content/uploads/2014/05/ginger5.jpg
Hahahahahahaha

[mustangfreek]

hahaha

I give props and someone else jumps in with the gay F#*@n ginger jokes.....lol.....

And you didnt get my good side....lol..

[alamo5000]

hahaha

I give props and someone else jumps in with the gay F#*@n ginger jokes.....lol.....

UW deserves the props....

You do have to admit though, the whole ginger thing is a low hanging fruit. [:D]

[toolboxluis00200]

http://www.slightlyqualified.com/wp-content/uploads/2014/05/ginger5.jpg

never knew ther was a day like that OO

[Ride4frnt]

I agree. UW is a good dude that I hope to get to meet sometime. I was here a week before I was given things graciously by him, and I'll forever be grateful for that. I can't wait to see what you guys make of these parts!

[GOST]

Hey, gingers are HOT!

[SINNER]

SINNER,

That looks great man. It's too bad you already got those cerakoted, I think you would have been prime to T&E a Gen 2 Aero Lower to match that upper. [:D]

Thank you. I actually got a few of those rails from Aero already coated for something like $110 a piece when they liquidated all the Cerakoted parts. No matching uppers so I planned to just change the color altogether. After looking at all those rail slots to blast I decided to attempt a color match. 110% luck as that was the first try at a match. I do appreciate keeping me in mind but honestly with the pile I have to even zero my review would likely be during the gen 4 release. haha

[Naytwan]

I agree. UW is a good dude that I hope to get to meet sometime. I was here a week before I was given things graciously by him, and I'll forever be grateful for that. I can't wait to see what you guys make of these parts!

Agreed. If he's ever in San Diego I got a beer for him.

[Computalotapus]

Yeah, and there might be a couple of other items in there that was originally on your list ... [:D]

BUT... I need a range report, especially groups!

You know I will document the heck out of the zero process and I think I can get you groups from 100-600 yards with it

[gatordev]

...and I think I can get you groups from 100-600 yards with it

I hate you.

I don't really want to live in the sticks, but having land to shoot at least that far would be pretty cool. I just don't want my ice cream to melt on the way back from the grocery store.

[Computalotapus]

I hate you.

I don't really want to live in the sticks, but having land to shoot at least that far would be pretty cool. I just don't want my ice cream to melt on the way back from the grocery store.


If it makes you feel better its an hour drive for me to get to the range I shoot at.

[gatordev]

It always seems like a distance range is at least that far away. I'm trying to go "qualify" at a range about 1:20 from me this Saturday. That's kind of far to make it a regular occurrence, at least for me.

[velocity2006]

If it makes you feel better its an hour drive for me to get to the range I shoot at.

That would drive me crazy lol. One benefit of the PNW is there are tons of places to shoot within 20 minutes of here.

[Computalotapus]

It always seems like a distance range is at least that far away. I'm trying to go "qualify" at a range about 1:20 from me this Saturday. That's kind of far to make it a regular occurrence, at least for me.

The thing I like about it being that far is that I am not spending a lot of time and money shooting. It really makes me go to the range with a purpose. Because I have been going with a purpose to the range I have actually seen huge improvements in my shooting because I am actually doing drills and documenting what I need to work on for the next range trip.


That would drive me crazy lol. One benefit of the PNW is there are tons of places to shoot within 20 minutes of here.

Range is a long distance shooting range. Can do workups out to 1200 yards at this place. I will go to club I belong to (still an hour drive), to do the initial zero and 100 yard confirmation.

[Ride4frnt]

I'm 20 minutes from 1000yds... I've got to join that range.

[alamo5000]

We have tons of cow pastures around here that would easily give 1000 yards or more. Just need to ask permission if I could shoot on someone else's place. The closest one---you can see it from the end of my driveway, but like I said, I need to get permission from whoever owns it first which may or may not happen.

I have a 200 yard lane out in my back yard.

Living in the country does have some benefits.

[gatordev]

The thing I like about it being that far is that I am not spending a lot of time and money shooting. It really makes me go to the range with a purpose. Because I have been going with a purpose to the range I have actually seen huge improvements in my shooting because I am actually doing drills and documenting what I need to work on for the next range trip.



I can certainly understand and relate. Even though my main range is only 25 minutes away (and a fantastic playground), I find that another great way to make your range time count is to be a tight wad. Most of the time (there are definitely exceptions), I hate to send $.25 to $1 down range with every trigger pull and not be getting something out of it. It's amazing how much you can accomplish with a plan and only 100-200 rounds if you apply it effectively.

[alamo5000]

I can certainly understand and relate. Even though my main range is only 25 minutes away (and a fantastic playground), I find that another great way to make your range time count is to be a tight wad. Most of the time (there are definitely exceptions), I hate to send $.25 to $1 down range with every trigger pull and not be getting something out of it. It's amazing how much you can accomplish with a plan and only 100-200 rounds if you apply it effectively.

^^^ What he said! YES!!!

I agree 100% with this sentiment. Practice is one thing, but perfect practice makes perfect. I rarely will shoot more than a magazine or two a few times a week and that's about it. Of course there are times when I get together with people and we shoot a whole lot more than that. My thing is though is I need to figure out more skills that I need to work on. I mean there are things like gathering data on your optic, your ammo, shot logging, or whatever... but I am wondering what kind of shooter skills I need to work on.

[UWone77]

We have an Aero Gen2 lower avail. Let's get some new blood into this program!

[Ride4frnt]

We have an Aero Gen2 lower avail. Let's get some new blood into this program!

I say we make everyone state their case as to what the lower will be used for and then hold a tribal council.

[Dstrbdmedic167]

We have an Aero Gen2 lower avail. Let's get some new blood into this program!

I might put the pins in backwards. I'm out... [bash]

[Ride4frnt]

I might put the pins in backwards. I'm out... [bash]

Selector detent in after the spring. Damn lever won't lock.

[Dstrbdmedic167]

Selector detent in after the spring. Damn lever won't lock.

Pretty much

[toolboxluis00200]

i dont have LPK so no go for me

[Ride4frnt]

Justin isn't 21, but damn if he don't need a lower for those cmt uppers that he's got a pile of.

[Dstrbdmedic167]

Justin isn't 21, but damn if he don't need a lower for those cmt uppers that he's got a pile of.

Indeed it's a damn shame!

[GOST]

We have an Aero Gen2 lower avail. Let's get some new blood into this program!

I'd give it to Medic for the laugh he's given us today.

[Dstrbdmedic167]

I'd give it to Medic for the laugh he's given us today.

Always glad to be of service! Lol....

And if nothing else ive generated some traffic too

[toolboxluis00200]

i can go for that PA 2.5 scope if it still around

[GOST]

Who hasn't received anything yet? Stick giveaway included.

[Ride4frnt]

Has SINNER gotten anything yet? Something tells me he would put it through its paces.

[toolboxluis00200]

Who hasn't received anything yet? Stick giveaway included.

i all ready send out the PA Micro to the next person and i all ready use up the Remington ammo that won testing out the Micro Dot

[GOST]

Has SINNER gotten anything yet? Something tells me he would put it through its paces.

I don't know, he would make a good candidate.

[SINNER]

Richard hinted at it but I have 5 rifles I built this winter I have yet to fire. LOL I'm afraid anything would sit too long before I got a chance to run it.


I am super excited to shoot Saturday though. My father is up from Florida and for the first time my son is going with us. Likely only shooting proven rifles and more likely mostly .22's through a Thompson Hot Shot.

I really do appreciate the thought though guys.

[Ride4frnt]

Richard hinted at it but I have 5 rifles I built this winter I have yet to fire. LOL I'm afraid anything would sit too long before I got a chance to run it.


I am super excited to shoot Saturday though. My father is up from Florida and for the first time my son is going with us. Likely only shooting proven rifles and more likely mostly .22's through a Thompson Hot Shot.

I really do appreciate the thought though guys.

What are the 5 you made this winter? Pre ban lowers? God I hope MSI can get some legislation reversed...

[GOST]

Hell, start boy off with something that'll raise the dead like a 300 minutes in mag.

[Dstrbdmedic167]

You know what I'd like to see in the T&E is some triggers! The new hiperfire EDT, a CMC, a Geissele or two. That would be the cats meow!

[GOST]

What triggers do you currently have?

[Dstrbdmedic167]

What triggers do you currently have?

one CMCin the 308 so it never gets used bc i dont shoot it hardly ever.. matter of fact ive got 87 rounds on her, one RRA 2 stage(shit) and the QMS and a ACT rest are milspec

[Ride4frnt]

Dude, buy a Geissele on sale right now at PA. Throw a SSA-E in that 308 and use the cmc on something that will get used more often.

[Ride4frnt]

I would love to t&e a cmc 2 stage beside my G trigger while we are on the subject.

[Dstrbdmedic167]

Dude, buy a Geissele on sale right now at PA. Throw a SSA-E in that 308 and use the cmc on something that will get used more often.

You of all people know how much speech therapy is costing me.. "moneybags" is no more for quite a while lol...

[GOST]

You need a Geissele SD3G. The Geissele flat bows are my favorites. Probably gonna put a SD-E in my current project.

[Ride4frnt]

You of all people know how much speech therapy is costing me.. "moneybags" is no more for quite a while lol...

Dammit, sell yourself. I'm tempted to grab another Geissele right now. $189 is a hot buy.

[Ride4frnt]

You need a Geissele SD3G. The Geissele flat bows are my favorites. Probably gonna put a SD-E in my current project.
Oh yeah, I'd like one of their flat bows but I'm stuck on this curved one now. Just so nice. My cmc is sweet too, but it's apples to oranges.

[GOST]

If you want a Geissele get a G2S. It's basically a SSA for less coin.

[SINNER]

What are the 5 you made this winter? Pre ban lowers? God I hope MSI can get some legislation reversed...

Only one on a pre ban, the Rock Creek blank I just got. You do know pistols, SBR's and HBAR AR's are GTG in Maryland right? I thought I had enough pre bans for 10 years of building but now with that more like 20 years. lol 2 bolt guns, a Mega .308, the RC and a .458 on a 80% lower.



Hell, start boy off with something that'll raise the dead like a 300 minutes in mag.

You sound just like his Grandfather LOL Mommy's only rule is no FA until he's 10. She fully supports his growing addiction at 5 years of age so I have to respect that.

[Ride4frnt]

Only one on a pre ban, the Rock Creek blank I just got. You do know pistols, SBR's and HBAR AR's are GTG in Maryland right? I thought I had enough pre bans for 10 years of building but now with that more like 20 years. lol 2 bolt guns, a Mega .308, the RC and a .458 on a 80% lower.




You sound just like his Grandfather LOL Mommy's only rule is no FA until he's 10. She fully supports his growing addiction at 5 years of age so I have to respect that.

Yeah I'm aware of what's allowed, just upsets me that I didn't get everything I wanted before that. I've got plans for another rifle, but I'll have to move my 18" barrel and parts to a new receiver set and use my pre ban seekins set as the basis for anything in the future.

[SINNER]

Just have HBAR engraved in the barrel....Hell this stupid ass state allows you to cash and carry a SCAR 16s but you can't buy a cheap Rock River. haha Saw a new suit coming over the handgun licensing today too. The lawsuits are looking promising. Hogan has final say on how far the state goes in defending the suits. Could be the saving grace. We will see.

[Aragorn]

The SD3G is what I'm looking to get. Not sure about the flat bow, never tried one on an AR, but for me the difference would be to automatically differentiate from the SSA-E I have.

Flat bow, finger is on the SD3G.
Curved bow, finger is on the SSA-E.

Got a buddy with a SSA, SSA-E, and an ALG ACT. When we start swapping uppers and lowers its easy to lose track of what trigger you're about to pull.

[toolboxluis00200]

if you guys can get a CNC 3.5 trigger i can give it a try :)

[UWone77]

if you guys can get a CNC 3.5 trigger i can give it a try :)

You can T&E a dictionary... Websters...[BD]

[toolboxluis00200]

I think I have one laying around

[mustangfreek]

What triggers do you currently have?Been busy so late to the conversation..trigers would be cool..but who is gonna want to give up a good trigger..lol...As i have Bever shot with a nice trigger...What crap is that...haha


You can T&E a dictionary... Websters...[BD]


Lol...Spit mt dew all over.,..

[JHoward]

I was just thinking how great a trigger T&E would be. I've got to get one soon.

[UWone77]

Well the Aero Gen 2 Lower is still available. If you haven't T&E'ed anything yet and looking to build a lower together very soon, send me a PM and let me know what you plan to do with this.

[Ride4frnt]

Gonna go shoot with this 2.5x PA scope tomorrow. Initial impression: I don't dig it on the rifle I intended to use it on. I'm using it with a FSB and it's not quite enough magnification to get rid of the FSB in the sight picture. It's a very faint blur out front, but noticeable. 3x would get rid of it completely. I'll move it over to the SBR to see how much I like it otherwise.

[Pyzik]

Looking forward to your impressions ride.

[velocity2006]

Should be a good little optic. My 30mm Red Dot from PA is solid, and I would love to try out one of their 4-14X44 Mil Mil FFP scopes

[gatordev]

If it makes you feel better its an hour drive for me to get to the range I shoot at.

Well, my one hour and 10 minute trip (one way) to the range on Saturday was well worth the visit. I'm now "qualified" on that range and will enjoy going back some time soon. Getting a first round hit on steel at 800 with a ~6" group was pretty satisfying, too.

[Computalotapus]

Well, my one hour and 10 minute trip (one way) to the range on Saturday was well worth the visit. I'm now "qualified" on that range and will enjoy going back some time soon. Getting a first round hit on steel at 800 with a ~6" group was pretty satisfying, too.


👍👍 awesome job

[Dstrbdmedic167]

Well, my one hour and 10 minute trip (one way) to the range on Saturday was well worth the visit. I'm now "qualified" on that range and will enjoy going back some time soon. Getting a first round hit on steel at 800 with a ~6" group was pretty satisfying, too.

Nice! I'm gonna stretch the legs of the T&E rifle to 600 next Sunday. Never shot that far so I'm looking forward to it.

[Computalotapus]

UWone77 got the package today and I am stoked..the kid is happy as well. Thank you for the barrel and the extra goodies, please tell everyone involved in making this happen thank you for me.

http://www.computalotapus.com/images/wevoswagpack.jpg

As soon as race season kicks in later this month I will be picking up the rail, bcg, gas block and gas tube to finish this build out. Should be shooting around mid June.

[toolboxluis00200]

UWone77 got the package today and I am stoked..the kid is happy as well. Thank you for the barrel and the extra goodies, please tell everyone involved in making this happen thank you for me.

http://www.computalotapus.com/images/wevoswagpack.jpg

As soon as race season kicks in later this month I will be picking up the rail, bcg, gas block and gas tube to finish this build out. Should be shooting around mid June.

cool parts hope you and the kids enjoy it

[JHoward]

Dude.... I want so bad!! I can't wait to get my 16" Intermed tuned in. I bet that 16" rifle is going to be awesome! An FFSSR would look good with it as well!

[Farva]

Anyone have somewhat extensive time with the slidelock charging handle? What little I've seen people report it eating away at the upper pretty fast but that was one instance. Just curious because I like the idea

[UWone77]

Anyone have somewhat extensive time with the slidelock charging handle? What little I've seen people report it eating away at the upper pretty fast but that was one instance. Just curious because I like the idea

Here's the WEVO T&E gun with 500 racks through the upper. I don't think it's a big deal so far.


http://i1016.photobucket.com/albums/af282/richdkim77/IMG_3173_zpssh2llata.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_3173_zpssh2llata.jpg.html)

[UWone77]

alamo, here's that varmit side charging upper:

http://i1016.photobucket.com/albums/af282/richdkim77/IMG_3269_zpseanho5ij.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_3269_zpseanho5ij.jpg.html)

[Farva]

Here's the WEVO T&E gun with 500 racks through the upper. I don't think it's a big deal so far.


http://i1016.photobucket.com/albums/af282/richdkim77/IMG_3173_zpssh2llata.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_3173_zpssh2llata.jpg.html)

Yeah that doesn't look bad at all! Thanks for the pic UW!

[SINNER]

Here's the WEVO T&E gun with 500 racks through the upper. I don't think it's a big deal so far.


http://i1016.photobucket.com/albums/af282/richdkim77/IMG_3173_zpssh2llata.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_3173_zpssh2llata.jpg.html)

Mine seemed to have loosened up a good bit. I have found that it is much smoother on forged uppers compared to billet. I will likely nose the edges over before I coat the upper I plan on using this with.

[GOST]

Someone should do a weight comparison with the Slide Lock. The Slide Lock is really light.

[Computalotapus]

Someone should do a weight comparison with the Slide Lock. The Slide Lock is really light.

I will weight it next to the RA Raptor when I get to the office tomorrow

[GOST]

Sounds good, if weigh it against my Raptor it would be about half the weight. My Raptor is an early one with steel wings and no laser etching.

[Pyzik]

alamo, here's that varmit side charging upper:

http://i1016.photobucket.com/albums/af282/richdkim77/IMG_3269_zpseanho5ij.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_3269_zpseanho5ij.jpg.html)

What brand is that receiver?

[UWone77]

Mine seemed to have loosened up a good bit. I have found that it is much smoother on forged uppers compared to billet. I will likely nose the edges over before I coat the upper I plan on using this with.

Contact Mega. They had some in the initial run with weak springs. They will replace it.

[SINNER]

I was going to give it one more use to see if it continued to get weaker. Thanks for the heads up. Do you know if they will just send a spring or if the entire handle needs returned?

[UWone77]

I was going to give it one more use to see if it continued to get weaker. Thanks for the heads up. Do you know if they will just send a spring or if the entire handle needs returned?

Good question, contact them and let us know. I believe they were replacing the entire charging handle.

[Naytwan]

That's an interesting upper.

[velocity2006]

The CH on that upper reciprocating?

[Pyzik]

The CH on that upper reciprocating?

This is what I was curious about. Most likely, yes.

[velocity2006]

This is what I was curious about. Most likely, yes.

I assumed so, I am still waiting on a non reciprocating side charging upper that keeps the assembly all internal. Not really digging the FAL type ones where the cover slides with the CH. Pretty sure with my luck I would be the one to smash the hell out of myself on the reciprocating ones.

[docsherm]

I used to do this a lot for different companies. I would lime to get back into it. I would be willing to help out.

[Pyzik]

I assumed so, I am still waiting on a non reciprocating side charging upper that keeps the assembly all internal. Not really digging the FAL type ones where the cover slides with the CH. Pretty sure with my luck I would be the one to smash the hell out of myself on the reciprocating ones.
I've done it (on an ak?, can't remember). What I do remember is that it does not feel good.

[SINNER]

Contact Mega. They had some in the initial run with weak springs. They will replace it.

Jason from Mega told me he has never heard of such a thing. Wanted me to ship it back. Sure let me waste an hour of my time to ship a $55 handle back. Lesson learned with these. Into the junk box it goes.

[UWone77]

Jason from Mega told me he has never heard of such a thing. Wanted me to ship it back. Sure let me waste an hour of my time to ship a $55 handle back. Lesson learned with these. Into the junk box it goes.

Wow... I'm shocked. I'll have to make an inquiry.

[SINNER]

I assumed so, I am still waiting on a non reciprocating side charging upper that keeps the assembly all internal. Not really digging the FAL type ones where the cover slides with the CH. Pretty sure with my luck I would be the one to smash the hell out of myself on the reciprocating ones.

http://www.joeboboutfitters.com/Spartan_Side_Charge_Non_Reciprocating_Billet_Upper _p/jb-non-recip-upper.htm

Rebranded Gibbz Arms non reciprocating side charger.

Personally never had an issue with reciprocating charging handles. Of all my semi's the AR's are about the only ones I own that do not cycle with the bolt. I actually prefer the charging handle set up on my SCAR's to the AR design.

[velocity2006]

http://www.joeboboutfitters.com/Spartan_Side_Charge_Non_Reciprocating_Billet_Upper _p/jb-non-recip-upper.htm

Rebranded Gibbz Arms non reciprocating side charger.

Personally never had an issue with reciprocating charging handles. Of all my semi's the AR's are about the only ones I own that do not cycle with the bolt. I actually prefer the charging handle set up on my SCAR's to the AR design.

That features the sliding FAL type cover that I am not really liking. I dont really have a problem with a traditional CH, but I am partial to running my Styer, and it would be nice to have an AR that has a similar manual of arms. I should probably check out the ARAK system a bit more.

[SINNER]

Wow... I'm shocked. I'll have to make an inquiry.

Likely find a spring that will work and deal with it that way. Not a big deal at all really. Thank you though.

[Computalotapus]

The RA Raptor weighted in at 1.5 oz. The RA Slidelock weighted in at 1.3 oz.

[alamo5000]

alamo, here's that varmit side charging upper:

http://i1016.photobucket.com/albums/af282/richdkim77/IMG_3269_zpseanho5ij.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_3269_zpseanho5ij.jpg.html)

That looks interesting. I've seen side chargers before but I have no experience with them. It would be interesting to experiment around with it and get a feel for that kind of set up. It's definitely 'unique'.

I will give it the scientific approach for sure! LOL

[UWone77]

That looks interesting. I've seen side chargers before but I have no experience with them. It would be interesting to experiment around with it and get a feel for that kind of set up. It's definitely 'unique'.

I will give it the scientific approach for sure! LOL

PM me your address again.

[alamo5000]

PM me your address again.

Done.

[UWone77]

Looks like at some point we're getting a Lantac UAR and BCG for this.

[Pyzik]

Looks like at some point we're getting a Lantac UAR and BCG for this.
Wow, you guys are really getting a nice collection together.

[velocity2006]

Those the ones with the rounded cam pins? I saw the release photos for those a while back, really nice looking uppers.

[Dstrbdmedic167]

That is a nice score.

[UWone77]

Those the ones with the rounded cam pins? I saw the release photos for those a while back, really nice looking uppers.

I'll double check what the time line is, but they are in line for you my man.

[Farva]

Nice

[GOST]

The RA Raptor weighted in at 1.5 oz. The RA Slidelock weighted in at 1.3 oz.

Not much weight saving. I need to weigh my first run Raptor sometime, I'd guess it to be at least 2.5 oz.

[GOST]

I need a Lantac BCG, but I wouldn't give it back.[BD]

[Dstrbdmedic167]

I need a Lantac BCG, but I wouldn't give it back.[BD]

You have the UAR don't you?

[GOST]

I've got the UAR and will probably get the E-BCG to go with it.

[Dstrbdmedic167]

I've got the UAR and will probably get the E-BCG to go with it.

Nice! That should be a sweet shooter for sure!

[velocity2006]

I'll double check what the time line is, but they are in line for you my man.

Cool, would be awesome to check them out in person.

[docsherm]

I would be interested in T&Eing:

Primary Arms Advanced Micro Dot with Push Buttons and 50K Battery Life

LanTac Dragon for 556

I have been looking at getting both of those and the reviews I have seen have me on the fence.

[UWone77]

I would be interested in T&Eing:

Primary Arms Advanced Micro Dot with Push Buttons and 50K Battery Life

LanTac Dragon for 556

I have been looking at getting both of those and the reviews I have seen have me on the fence.

We can definitely get you on the list for the PA Optic.

I'm working on some stuff behind the scenes for you.

In case the rest of you guys don't know, doc is what the rest of us would consider a subject matter expert. Thanks for being here and sharing your knowledge!

[alamo5000]

In case the rest of you guys don't know, doc is what the rest of us would consider a subject matter expert. Thanks for being here and sharing your knowledge!

Do tell.

A number of people here are very knowledgeable about stuff. I always find it both amazing and awesome that we have so much talent and knowledge here on WEVO. This place keeps on getting better and better.

[Naytwan]

Do tell.

A number of people here are very knowledgeable about stuff. I always find it both amazing and awesome that we have so much talent and knowledge here on WEVO. This place keeps on getting better and better.

One of the main reasons I fell in love with this place, not to mention some awesome photographers running the joint/hanging out here.

[toolboxluis00200]

Do tell.

A number of people here are very knowledgeable about stuff. I always find it both amazing and awesome that we have so much talent and knowledge here on WEVO. This place keeps on getting better and better.

https://farm9.staticflickr.com/8759/16918446279_b90e32f7ae_o.jpg (https://flic.kr/p/rM2sDD)10952469_747519692011873_542433064862481679 0_n (https://flic.kr/p/rM2sDD) by toolboxluis (https://www.flickr.com/people/78779725@N00/), on Flickr

[alamo5000]

One of the main reasons I fell in love with this place, not to mention some awesome photographers running the joint/hanging out here.

Not to toot anyone's horn around here but I agree. And the lack of uppityness or bullshit is great. I personally think this is a fantastic place to be. The more I am here the more I like it. The mentality, the attitude, the fun, but also the people are just great. I like being surrounded by good people. There are no "Rambozos" here. (Some bozo that wants to be Rambo who comes off as some weirdo)... I personally like to be a knowledgeable person so there is some manner of nerd factor involved but hey, that's a good thing. And the fact that I can ask my nerdy questions from time to time and eventually at some point someone or several people can come along and give a real answer is just awesome.

As for the pics it's a double edged sword. On one hand they are awesome. On the other it reminds me that I am poor. [:D] J/K

[UWone77]

Sent some items out today to you guys. velocity2006 will soon have this in his hands... but after I fondle it for the rest of the week. [BD]


http://i1016.photobucket.com/albums/af282/richdkim77/IMG_3288_zpsgqbywkuh.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_3288_zpsgqbywkuh.jpg.html)

[GOST]

Lucky SOB.[BD]

[Txfilmmaker]

In case the rest of you guys don't know, doc is what the rest of us would consider a subject matter expert. Thanks for being here and sharing your knowledge!

Having another Texan around doesn't hurt, either :)


Sent from my iPhone using Tapatalk

[docsherm]

Having another Texan around doesn't hurt, either :)


Sent from my iPhone using Tapatalk

You can say that again.....;)

[alamo5000]

You can say that again.....;)

I am a fellow Texan too. Don't be leaving me out of this conversation [:D]

[Txfilmmaker]

I am a fellow Texan too. Don't be leaving me out of this conversation [:D]

"Remember the Alamo!" 😎


Sent from my iPhone using Tapatalk

[Computalotapus]

Having another Texan around doesn't hurt, either :)


Sent from my iPhone using Tapatalk

2 New York women go down to vacation in Texas. While out hitting the local bar and dance floors one of them spots a tall Texan and she leans over to tell her friend "I am taking that cowboy home tonight". The other lady laughs and asks why, she responds "Look at the size of that condom in his back pocket"

[Txfilmmaker]

2 New York women go down to vacation in Texas. While out hitting the local bar and dance floors one of them spots a tall Texan and she leans over to tell her friend "I am taking that cowboy home tonight". The other lady laughs and asks why, she responds "Look at the size of that condom in his back pocket"

http://youtu.be/6zXDo4dL7SU


Sent from my iPhone using Tapatalk

[GOST]

2 New York women go down to vacation in Texas. While out hitting the local bar and dance floors one of them spots a tall Texan and she leans over to tell her friend "I am taking that cowboy home tonight". The other lady laughs and asks why, she responds "Look at the size of that condom in his back pocket"

Funny, hadn't heard that one.

[Ride4frnt]

2 New York women go down to vacation in Texas. While out hitting the local bar and dance floors one of them spots a tall Texan and she leans over to tell her friend "I am taking that cowboy home tonight". The other lady laughs and asks why, she responds "Look at the size of that condom in his back pocket"

He's here all week folks.

[velocity2006]

Sent some items out today to you guys. velocity2006 will soon have this in his hands... but after I fondle it for the rest of the week. [BD]


http://i1016.photobucket.com/albums/af282/richdkim77/IMG_3288_zpsgqbywkuh.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_3288_zpsgqbywkuh.jpg.html)

/Drool already. Thinking I am going to need to load up another 1 or 2k for that bad boy.

[Dstrbdmedic167]

Lucky SOB.[BD]

Isn't it time for you to get some T&E goodness?

[UWone77]

Isn't it time for you to get some T&E goodness?

He already got hooked up. [:D]

[Dstrbdmedic167]

He already got hooked up. [:D]

Well nvm then lol. Should have known better.

[toolboxluis00200]

Sent some items out today to you guys. velocity2006 will soon have this in his hands... but after I fondle it for the rest of the week. [BD]


http://i1016.photobucket.com/albums/af282/richdkim77/IMG_3288_zpsgqbywkuh.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_3288_zpsgqbywkuh.jpg.html)
nice bcg

[JHoward]

So, did anyone get that gen 2 lower?

[UWone77]

So, did anyone get that gen 2 lower?

voodooman

[mustangfreek]

Nice goodies...

[UWone77]

Ride, Shane from Multitasker is sending us one of these: BVL530 Light. You can use it for T&E ... seems like it'll be a good long-term tester.

Eric, one of our mods will be shooting a new upper built around Rainier's new 16" Rock Creek Rifle Length Gas. Eric if you're reading this thread, I'll link up with you at some point soon to hand it off.

[Naytwan]

Ride, Shane from Multitasker is sending us one of these: BVL530 Light. You can use it for T&E ... seems like it'll be a good long-term tester.

Eric, one of our mods will be shooting a new upper built around Rainier's new 16" Rock Creek Rifle Length Gas. Eric if you're reading this thread, I'll link up with you at some point soon to hand it off.

That's a pretty interesting barrel. Was the rock blanks a limited run or will they be a regular product? Any idea?

[Naytwan]

NM, looked at the OG thread. Gonna have to get some stuff finished cause I need one of those to upgrade the barrel on a current rifle. Hmm, maybe I need to do the unthinkable and sell off some gun stuff.

[Ride4frnt]

Ride, Shane from Multitasker is sending us one of these: BVL530 Light. You can use it for T&E ... seems like it'll be a good long-term tester.

Eric, one of our mods will be shooting a new upper built around Rainier's new 16" Rock Creek Rifle Length Gas. Eric if you're reading this thread, I'll link up with you at some point soon to hand it off.

10-4, sweet.

Speaking of Shane, I need to get back with him about my broken series 3 sight adjuster.

[Farva]

Man that thing is SEXY!

[UWone77]

velocity, alamo, your items are on the way.

Anyone want to try out a Forward Control Design EMR-C? No big write up needed on a mag release... but we have one.

[alamo5000]

velocity, alamo, your items are on the way.

[:D] SWEET!!! I am excited! Thank you again!

[Ride4frnt]

velocity, alamo, your items are on the way.

Anyone want to try out a Forward Control Design EMR-C? No big write up needed on a mag release... but we have one.

I have one and I will be switching all my guns to those buttons. Pretty sweet for a small investment.

[mustangfreek]

Anyone want to try out a Forward Control Design EMR-C? .

yes.

I think for all the ginger ribbing ....its only fair....?....lol...

[velocity2006]

velocity, alamo, your items are on the way.

Anyone want to try out a Forward Control Design EMR-C? No big write up needed on a mag release... but we have one.

Awesome and thank you, I just purchased one of the Aero M4E1 7.5" Uppers with Keymod to run the bolt in so we can see how it wears on a new upper compared to a Milspec bolt. Need to find a lower now, going to try that new Shockwave "brace" looks much better than the Sig.

[toolboxluis00200]

well if you have any lights I can test that out

[UWone77]

We also have a 30mm Aimpoint type optic mount from Aero Precision available.

[UWone77]

Ride,

PM me your address again... the light Multitasker sent especially for you has arrived.

[Ride4frnt]

Ride,

PM me your address again... the light Multitasker sent especially for you has arrived.

Sent, thanks!

[alamo5000]

The goodies have arrived :)

[UWone77]

The goodies have arrived :)

I forgot to mention, you have to install that bolt catch included, otherwise it'll be a bolt action. Let me know if you need a roll pin or a replace to bolt catch once you're done with the upper.

[alamo5000]

I forgot to mention, you have to install that bolt catch included, otherwise it'll be a bolt action. Let me know if you need a roll pin or a replace to bolt catch once you're done with the upper.

Yeah I was just looking over that part. Interesting for sure.

I will let you know and keep you updated. I should be able to unscrew the bolt catch release and swap it out. At least I hope so:P. CMT Tactical is awesome like that. I have exactly one roll pin in my entire rifle and that is on the gas block.

There is a lot going on with that thing :) That aught to keep me busy for a little bit LOL It will be one doozie of a review.

Can you inbox me the deets on the barrel? I have no idea who makes it, what the chamber is and what the twist is.

[velocity2006]

Initial review of the Lantac is up.

[GOST]

Initial review of the Lantac is up.

The first post looks great. Look forward to seeing the rest.

[UWone77]

We've got an Aero Precision M4E1 Upper coming with a 12" MLOK Handguard coming. This will be one of the last items in the T&E program until we get some reviews and other existing items passed around and caught up.

Thanks for everyone's participation.

If you haven't received anything yet and are able to build up the Aero M4E1, let me know.

Thanks.

[Dstrbdmedic167]

That's a pretty sweet upper. I have the 16" keymod version. I like it.

[mustangfreek]

We've got an Aero Precision M4E1 Upper coming with a 12" MLOK Handguard coming. This will be one of the last items in the T&E program until we get some reviews and other existing items passed around and caught up.

Thanks for everyone's participation.

If you haven't received anything yet and are able to build up the Aero M4E1, let me know.

Thanks.

Nice addition to the T&E items, honestly there are so many i have forgot most of whats out there and there are quite a few items i want to hear/read/see pics about.......No more unboxing pics.......[BD]

Almost need a dedicated thread to keep track of the stuff and links to reviews, etc...

[BoilerUp]

We've got an Aero Precision M4E1 Upper coming with a 12" MLOK Handguard coming. This will be one of the last items in the T&E program until we get some reviews and other existing items passed around and caught up.

Thanks for everyone's participation.

If you haven't received anything yet and are able to build up the Aero M4E1, let me know.

Thanks.

PM sent. I'd love to use that combo for a 6.8 SPC build if you don't mind the fact that the AR Performance barrel I plan on using won't be in stock until the end of May.

[GOST]

Nice addition to the T&E items, honestly there are so many i have forgot most of whats out there and there are quite a few items i want to hear/read/see pics about.......No more unboxing pics.......[BD]

Almost need a dedicated thread to keep track of the stuff and links to reviews, etc...

Good idea.

[mustangfreek]

Good idea.

get er' done...lol..

I was just thinking it might be easier to read up on all of them and such..many items that were passed out and i quickly forgot alot of them..lol..if they were all in their own section/sub section it would make it easier to find/read up on them all......

[UWone77]

The PA 1-6x24 optic is back in the rotation. It's not sporting an ADM Mount.

I think Cotton is up next... if you're up for it.

[toolboxluis00200]

Ones I am up a running love to test out some optics. [:D].

[Cotton68spc]

Sounds great


Check me out on YouTube and Facebook

[mustangfreek]

...BUMP...

[AaronP220]

I wouldn't mind getting in on this.

[toolboxluis00200]

Any other reviews I have not seen any thing in some time??

[alamo5000]

Any other reviews I have not seen any thing in some time??

Mine :)

Updates included...

http://www.weaponevolution.com/forum/showthread.php?7656-Ambi-Side-Charger-Initial-Impressions&highlight=

[GOST]

Any other reviews I have not seen any thing in some time??

Here's one on the Lantac E-BCG from Velocity2006.

http://www.weaponevolution.com/forum/showthread.php?7601-LANTAC-.223-5.56X45MM-Enhanced-Full-Auto-Bolt-Carrier-Group-NiB-Coated

[mustangfreek]

BUMP....


Need a dedicated section for T&E reviews and just keeping tabs on whats out there to possibly play with or the good ol unboxing/vids and such..lol..

[Pyzik]

Funny I was just thinking yesterday that I hadn't heard anything from this thread in a bit.

[UWone77]

Funny I was just thinking yesterday that I hadn't heard anything from this thread in a bit.

Well you knew that was going to happen. We've had some really good write ups and some others where we haven't heard anything. Then again, you have to give the T&E process some time as not everyone can get to the range immediately. Once I get back up to speed, I'm going to follow up with some of the guys who have had some stuff for 3+ months.

[alamo5000]

Well you knew that was going to happen. We've had some really good write ups and some others where we haven't heard anything. Then again, you have to give the T&E process some time as not everyone can get to the range immediately. Once I get back up to speed, I'm going to follow up with some of the guys who have had some stuff for 3+ months.

UPS emailed me a confirmation that the ambi side charger upper was received back today. [:D]

It was definitely interesting and I learned a lot. I enjoy the T&E program.

[Pyzik]

Well you knew that was going to happen. We've had some really good write ups and some others where we haven't heard anything. Then again, you have to give the T&E process some time as not everyone can get to the range immediately. Once I get back up to speed, I'm going to follow up with some of the guys who have had some stuff for 3+ months.

Yeah, I knew it would. I do feel guilty I haven't had a chance to finish the write up I've started for this Troy upper (even though it wasn't a T&E). I'll I've done is indoor shooting this year which is limited to 50 yards (which SUCKS).
I have plans with a friend to finally get out toward the end of the month. If nothing else I have an MGO shoot coming up at the end of July which I AM going to and WILL be shooting.

[velocity2006]

I have 1000 projectiles on the way to load up some ammo to get more usage on the Lantac, if I am unable to buy it after that I will be sending it back. Prepped a ton of brass over the last two days, so should be easy loading.

[Farva]

I have 1000 projectiles on the way to load up some ammo to get more usage on the Lantac, if I am unable to buy it after that I will be sending it back. Prepped a ton of brass over the last two days, so should be easy loading.

Oh yeah say it slower baby... Hahaha

[BoilerUp]

I'm finishing up my initial write-up on the WEVO T&E Aero Precision M4E1 Upper and 12" Enhanced M-LOK handguard. I'm planning on one more run out to the range this weekend. Anyone got any questions they want me to address in the review?

http://www.smugmug.com/photos/i-9wT5tsV/1/XL/i-9wT5tsV-XL.jpg

[GOST]

Nice glass, look forward to reading your review.

[UWone77]

A bunch of you guys have been slacking, but I do have an extra Kaw Valley Linear Comp for those of you who would want to use one on perhaps a pistol or SBR upper.

[toolboxluis00200]

https://i.imgflip.com/osblg.jpg (https://imgflip.com/i/osblg)via Imgflip Meme Maker (https://imgflip.com/memegenerator)

[Dstrbdmedic167]

Someone take away the meme maker from Luis...

[toolboxluis00200]

Someone take away the meme maker from Luis...

lol

[UWone77]

Why is his spelling improved with the meme generator?

[SINNER]

I saw a misspelled Meme from Luis on FB and was cracking up. Maybe he should post all replies with a meme generator. Clearly he found one with a better spellcheck built in.

[toolboxluis00200]

Why is his spelling improved with the meme generator?


I saw a misspelled Meme from Luis on FB and was cracking up. Maybe he should post all replies with a meme generator. Clearly he found one with a better spellcheck built in.

Better spellcheck [:D]

[MonkeyBomb]

I wouldn't mind trying the linear comp. I am currently running a levang on a 7 inch pistol.

[Pyzik]

A bunch of you guys have been slacking, but I do have an extra Kaw Valley Linear Comp for those of you who would want to use one on perhaps a pistol or SBR upper.

I was going to say I am having my Saiga .223 chopped and threaded but that will require pinning a comp so nope.

I really do hope guys get on it post their findings. I would love to see this program keep traction.

[UWone77]

I wouldn't mind trying the linear comp. I am currently running a levang on a 7 inch pistol.

Awesome. I enjoyed your rail review, so it's yours. PM an address. Thanks MonkeyBomb.

[velocity2006]

I actually have one sitting in the parts bin as well if anyone else wants to try the Kaw Valley.

[toolboxluis00200]

My LGS has complite uppers for $350 I need to pick one up next year just to do T&E

[alamo5000]

A bunch of you guys have been slacking

I concur!

Hey all you slackers! Get on the ball! Write some stuff up.

[DutyUse]

If anyone has serious plans to attend training or such and will being putting a lot of rounds down range I'd love to send them a Fathom Enhanced BCG to continue its abuse :)


Sent from my iPad using Tapatalk

[BoilerUp]

This slacker just posted his T&E review. I hope it's up to WEVO standards. Thanks for the opportunity to participate!