Results 811 to 825 of 2420
Thread: NFA Picture Thread
-
25 June 2015, 09:02 #811
-
27 June 2015, 15:52 #812
Changed things up a little bit. Jury is still out... But after looking at this pic I thinkg I should have called it 50 shades of FDE... I might have to fix that...
-
27 June 2015, 15:56 #813WEVO Spell Checker
- Join Date
- Sep 2014
- Location
- Florida
- Posts
- 3,198
- Downloads
- 1
- Uploads
- 0
U need to send it to me for proper testing
$300 and 10 Pastrami Sandwiches and a case of Diet Coke. ( UWone77)
-
27 June 2015, 16:12 #814
-
27 June 2015, 16:51 #815WEVO Spell Checker
- Join Date
- Sep 2014
- Location
- Florida
- Posts
- 3,198
- Downloads
- 1
- Uploads
- 0
-
27 June 2015, 16:55 #816
-
27 June 2015, 17:00 #817
NFA Picture Thread
I won't argue that at all. It was just a reconfig of parts as my original plan didn't work at all. Was curious how the scope would look on it. I think my reserves about it are what you mentioned. I had the eotech on here with the STR. I'd love to have a bobro or micro/SW setup.
-
28 June 2015, 13:37 #818
-
28 June 2015, 13:52 #819
-
28 June 2015, 13:54 #820
-
28 June 2015, 13:55 #821
-
28 June 2015, 14:04 #822
-
28 June 2015, 14:11 #823
-
28 June 2015, 14:57 #824
Let me try to explain it. Since it's an AR, with the optic mounted, eye relief needs to be measured from the charging handle forward in a similar fashion as the iron sights. This allows proper charging handle clearance and also allows the shooter proper position behind the rifle from cheek weld on back.
Here's a helpful illustration:
Also, height over bore is the distance between the center axis of the rifle bore and the middle of the scope objective lens. I try to keep mine as low as possible; a scope cap barely fits on my objective lens it's so low
-
28 June 2015, 15:09 #825WEVO Spell Checker
- Join Date
- Sep 2014
- Location
- Florida
- Posts
- 3,198
- Downloads
- 1
- Uploads
- 0
This is what u need
$300 and 10 Pastrami Sandwiches and a case of Diet Coke. ( UWone77)