Results 1 to 3 of 3
Thread: Holosun EPS
-
13 May 2023, 11:43 #1
Holosun EPS
I need a little help, please.
I have acquired a S&W M&P 2.0 Metal Competitor ... photo in the handgun pix thread.
I would like to put a Holosun EPS on it. Holosun says it has the Leupold DPP footprint. Problem is, all the adapter plates I see for the DPP, have recoil lug bosses on them. I thought I saw (somewhere) that the EPS does not have holes for the recoil lugs. That would imply you cannot use DPP adapter plates.
I've been to CH Precision, but cannot enlarge their stock photo of their C.O.R.E. DPP plate enough to tell if it has the recoil lugs. Sent an email, but no response yet.
If you have an EPS, or EPS Carry, do you remember if the bottom is smooth, or had holes for the recoil lugs?NRA Benefactor Member
NRA Certified Instructor
"I won't be wronged, I won't be insulted, and I won't be laid a hand on."
John Wayne - "The Shootist"
-
13 May 2023, 13:38 #2
Check out the pictures in this article.
https://freedomgorilla.com/blogs/new...07k-comparison
-
13 May 2023, 16:14 #3