Bravo Company USA 7.62 Gunfighter Compensator

[UWone77]

Bravo Company USA is introducing their 7.62 Gunfighter Compensator Mod 1. If you're familiar with the 5.56 version of the Gunfighter Compensator, these will look familiar, as the design is very similar, but of course threaded 5/8x24 for .308 rifles. These should be available from Bravo Company USA and your favorite BCM dealers in the next few weeks.


Description:


The BCM Gunfighter Compensator Mod 1 - 7.62
Tuned slots and interior cone offer maximum in recoil mitigations, compensation of muzzle-rise, and flash reduction
Dual action brake minimizes side pressure and designed to have much less noise asscoiated with typical compensators. Makes it perfect for working in teams for CQB. It is a compensator that is built for the 21st Century Gunfighter!
Stainless Steel construction for maximum corrosion resistance
Includes a crush washer
Should be installed by a qualified armorer
Threaded 5/8 x 24 for 7.62mm AR10 platforms.


Please note: The combustion gasses exiting the muzzle of a rifle are extremely hot, traveling at extreme velocity, and contains not only burning gasses but solid particles of unburnt powder as well as metals from the projectile. Due to the inherent nature of steel, it is nearly impossible to survive unaffected in this environment when directly exposed. The high temperatures begin to make the steel more malleable, which allows solid particles and pressure waves to deform and erode surfaces upon exit.
Due to the new and unique design of the BCM compensators, the user may notice small pits on the interior surfaces of the compensator. This is normal. Most designs do not impede the exit flow very much, while the BCM approach is exactly opposite. These surfaces are specifically designed to operate within the environment found at the muzzle, and are intended to allow significant amounts of deterioration before any loss of performance is seen/felt. These compensators have been tested through many thousands of rounds, and while the wear surfaces may give pause to some users, trust when we say that it's normal.

[scotheocelot]

I just ordered one. I will provide a review if you think it is beneficial. This will be the 4th brake I have used on my 7.62.

[Flatlander]

Shooting mine tomorrow!

[UWone77]

I just ordered one. I will provide a review if you think it is beneficial. This will be the 4th brake I have used on my 7.62.

Can't wait for your review then! I've got over 1k rounds on a 5.56 BCM Comp Mod1, and was more or less satisfied with it. It's comparable to other compensators in that price range.

Looks like they are in stock and ready to ship at Bravo Company USA

http://www.bravocompanyusa.com/BCMGU...-mod-1-762.htm