Results 16 to 30 of 46
-
9 December 2015, 17:41 #16
lol
"It's time to start slapping people." - George Carlin
NRA Life Member | SAF Life Member | FPC Member
ΜΟΛΩΝ ΛΑΒΕ
-
9 December 2015, 20:51 #17LEO / MIL
- Join Date
- Mar 2011
- Location
- SLC, UT
- Posts
- 606
- Downloads
- 0
- Uploads
- 0
I put some on the first AR I built. I'll never put them on another. There wasn't anything wrong with them, they're just expensive and don't add anything to a rifle. I imagine they're still popular with people who buy ARs with Punisher rollmarks and stuff like that.
-
9 December 2015, 22:27 #18
Never used them and never needed them. Always thought it was a scam. I put them right up there with the Mood ring and canned sunshine. I run Geissle triggers, has a spring inside to lock the pin in place. PS, I ran your ABC through my carbine course twice this weekend and all I can say is WOW! Rock solid, excellent design! Ran flawlessly.
-
9 December 2015, 22:30 #19
@ Dutyuse, that thing looks exactly like the masterlink on the chain of my YZ250f... Hehehehe...
-
10 December 2015, 05:17 #20
Don't use them
Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
10 December 2015, 06:33 #21
Is Bill Geisselle still advising against using them with his triggers? Last thing I heard was KNS was going to make a version of pins that wouldn't cause failures Geissele and others triggers experienced?
-
10 December 2015, 07:20 #22
As far as I have heard they are still not recommended. For one they are the wrong size and I have heard they are much softer than the pins supplied with the Geissele triggers.
-
10 December 2015, 08:30 #23
-
10 December 2015, 11:55 #24
I once went full retard with the Nickel Boron Upper/Lower and rail. Stainless barrel and brake. Chrome FA. UBR stock. Nickel Boron BCG. Chrome controls and even some KNS pins. Since I didn't have a rapper to rent the gun to for a video, I took it to my local range. I sat down and pulled that thing out of the case and I was overwhelmed by the amount of douche that instantly surrounded me at the range. I knew right then I had crossed the line and I needed to get rid of the abortion I had created as soon as possible.
I now associate KNS pins with that experience.
-
10 December 2015, 13:33 #25
While I don't necessarily consider them douche accoutrements, I don't see the need for them, otherwise they'd have been around for 50 years. That said, I did try some, and one set is still on a lower, though I haven't gotten around to upgrading the trigger on it. Once I put a Geissele in it, the KNS pins will come off and stay off.
There's no "Team" in F**K YOU!
-
10 December 2015, 13:38 #26
So much hatred for the KNS pins
I use them, only because I had pins walk during a hunt. Was not my rifle, but never wanted to deal with that issue again. For 30 dollars a rifle it's pretty simple peace of mind, and an extremely small expense in the scope of a rifle that I intend on hunting with.
That said I have had 0 issues with builds I have not use them on when the springs are properly installed.
-
10 December 2015, 14:00 #27
-
10 December 2015, 14:07 #28
-
10 December 2015, 15:31 #29
Quite a bit of opinions and info here http://www.ar15.com/forums/t_3_12/45...Confusion.html
-
10 December 2015, 18:11 #30
Yep, this guy sums it up...
"Throw out the stupid fuckin KNS pins, they have NO place being used with Geissele triggers." and, " In short, if you own a Geissele trigger and have it held in place with KNS pins, you're a moron" That was one funny ass thread, I was rollin!