Results 1 to 15 of 15
Thread: First 80% Lower - My Experiences
-
19 September 2016, 05:31 #1
First 80% Lower - My Experiences
So, I got and completed my first 80% lower recently. Someone asked about the experience so here is my opinion.
Would I do it again? ...Maybe. The work wasn't hard but it was time consuming.
The whole process took me about 5 hours over the total of three evenings in the garage. (I am sure the process gets faster the more you do.) Plus I have a huge mess to clean up. But that's my fault since I don't have a shop vac and forgot to borrow one from work.
I didn't have the tools other than the drill press. Luckily, I was able to borrow a jig and router. Total cost for me to have a lower has been $20 + whatever finishing is going to be.
For me it comes down to cost and time, if you are doing one (1) it just isn't cost effective if you don't happen to already own the tools. Plus four to five hours to get it done.
If you plan on doing several or even a build party with friends then I can see the draw.
So, final thoughts.- It was fun.
- I am glad I did it.
- Being able to have everything shipped to your doorstep is awesome.
- Doing only one is pricey.
- It's slightly time consuming.
- It's messy.
- I can see the benefits of having all the equipment and several inexpensive 80% lowers stashed away, for whatever.
Double Snek by Damage Photos, on Flickr
DSC_0020 by Damage Photos, on FlickrGround Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
20 September 2016, 06:23 #2
That came out awesome. If you don't mind me asking which jig is it that you used?
-
20 September 2016, 06:26 #3Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
20 September 2016, 06:54 #4
It came out very well! And thanks for the post... it's realistic about what to expect in the way of tools and work and all that. I can buy a few aero lowers for cheap so unless I just really decide I love machine work I don't think the 80% thing is for me.
-
20 September 2016, 07:00 #5
Bingo. That's where I am at. You'd have to do at probably three 80% lowers break even on cost vs buying standard Aero or similar lowers. After three you probably start seeing the savings. But you're talking hours of time. That's worth something too.
But, they can be shipped to your house. Some folks might rate that value higher than I am.
Sent from my SM-N910V using TapatalkGround Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
20 September 2016, 10:31 #6
I can ride my bicycle to my FFL and be there in 10 minutes. Snek not worth it...
There's no "Team" in F**K YOU!
-
20 September 2016, 10:34 #7Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
20 September 2016, 10:39 #8
I told Joe at Parallax he just needed to do a complete Snek lower, but then he reminded me he's Type 01 FFL.
-
20 September 2016, 11:36 #9Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
20 September 2016, 14:47 #10
I'm impressed how smooth that interior came out.
-
20 September 2016, 14:52 #11Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
23 September 2016, 21:17 #12
Glad you had fun. Anderson about 10 min. drive from here. I have access to a Bridgeport, etc., but I just can't force myself to spend the time doing one, for what I can buy a decent one for. Just lazy, I guess. The SNEK is cool, don't care what anyone says.
FTNRA Life Member
Basket full of Deplorables Life Member
-
23 September 2016, 23:11 #13
Nicely done, Pyzik. It looks like a fun project, as i enjoy working with machine tools. But, i don't even own a drill press, let alone a milling machine, and barely have room to park my cars in my garage. I would like a shop at some point in the future. So until such time, i'll probably stick to buying finished lowers.
"It's time to start slapping people." - George Carlin
NRA Life Member | SAF Life Member | FPC Member
ΜΟΛΩΝ ΛΑΒΕ
-
23 September 2016, 23:16 #14NRA Life Member
Basket full of Deplorables Life Member
-
23 September 2016, 23:50 #15
It's a good idea, but unfortunately i don't even have the space for that. Two car garages ain't what they used to be. And my work bench in my shed, while steady, isn't very large. I might be able to squeeze a bench sized machine on it, but there wouldn't be room for anything else, and i wouldn't have the space to store it when not in use.
"It's time to start slapping people." - George Carlin
NRA Life Member | SAF Life Member | FPC Member
ΜΟΛΩΝ ΛΑΒΕ