Results 1 to 11 of 11
Thread: Midwest Industries Ruger PC9
-
20 March 2019, 13:16 #1
Midwest Industries Ruger PC Products
The Ruger PC9 will now be more customizable than ever with the upgrades we have been working on.
The Midwest Industries PC9 Combat Rail (MI-CRPC9) is a light weight, slim profile upgrade that installs with ease with the provided mounting bolt and 5/32 allen wrench.
The handguard is 12” in length and features 8 sides of M-LOK slots. It has a total of three built in QD sling points with one on each side and a third on the bottom to allow for a more traditional way of rifle carry.
The 12” handguard has a thin outside diameter of 1.5” and weighs only 10.9 oz
With a 6061-aluminum construction and type 3 hard coat anodized finish this handguard will last a lifetime and has the warranty to back that up.
A five-slot polymer M-LOK rail is included.
This handguard has a patent pending.
With the addition of the handguard's front QD sockets comes the need for a place to sling up in the rear of the stock. With this need comes our stock plate (MI-PC9QDSP).
This plate is super easy to install with the factory hardware, weighs just 3.2 oz and has three build in QD sockets with one on each side and a third on the bottom. This product, like the handguard, is constructed of 6061 aluminum and has a type 3 hard coat anodized finish as well as a lifetime warranty.
Not to be left out, we also looked at the bolt handle and saw room for improvement.
With a slightly longer than factory length and a knurled exterior finish our bolt handle (MI-PC9BH) will not slip from your fingers when used to charge or clear your rifle.
This handle is constructed of 4140 steel and is coated with a mag phosphate finish. This handle installs with the factory hardware.
These products, like everything we make, is putting Americans to work by being 100% made in the USA and is backed by our lifetime warranty.
Retail Pricing in USD:
MI-CRPC9 - $169.95
MI-PC9QDSP - $39.95
MI-PC9BH - $19.95
Last edited by Midwest Industries; 20 March 2019 at 13:33.
-
20 March 2019, 14:01 #2
DAMN! That rail improves the looks of the gun by about 150%, at least.
-
20 March 2019, 18:34 #3
Damn when can we get that in that configuration. I don't wanna have to swap all that out. What an improvement looks amazing
-
20 March 2019, 18:41 #4
That does look very good.
-
22 March 2019, 07:50 #5
Here are a couple more views:
Last edited by Midwest Industries; 22 March 2019 at 08:35.
-
22 March 2019, 12:16 #6
Well heck, now I wish I hadn't sold mine...
-
13 April 2019, 07:07 #7
Pre orders will begin April 22nd!
-
17 April 2019, 14:23 #8
A lot of time and thought went into this handguard.
We have incorporated three QD sling attachment points as well as a place to thread in a stud for your Uncle Mikes style sling.
Another feature we offer is a row of M-LOK slots along the top edge which allows for mount lights for night/ indoor shooting or hunting.
It was our goal to make a handguard that was as functional as possible, as well as offer something aesthetically pleasing.
-
22 April 2019, 12:46 #9
Now taking pre orders to ship on the 25th!
https://www.midwestindustriesinc.com/category-s/570.htm
-
9 May 2019, 08:52 #10
Olive green handguards are now shipping!
https://www.midwestindustriesinc.com...-crpc9-odg.htm
-
16 May 2019, 15:00 #11
Our side mount for Aimpoint micro sights and clones is now shipping!
https://www.midwestindustriesinc.com.../mi-pc9t1m.htm