Results 1 to 14 of 14
-
14 April 2015, 12:24 #1Member
- Join Date
- Aug 2010
- Location
- Denver Colorado
- Posts
- 83
- Downloads
- 0
- Uploads
- 0
Weapon evolution 50K winner DAHMER build
About a year ago there was a give away. I was fortunate enough to win a DAHMER lower. At first I was looking at a custom build. Looking at some of the rifles built on this forum, I had plenty of ideas. Well I put it in the safe and completely forgot about it. If I hadnt cleaned the safe recently it would have still been forgotten.
Fast forward to last month. I got the youngest a 80% some time ago. Over spring break I brought him to work and he got to finish his lower. He's 14 so he did not get excited till I started putting parts into it. It was at this time the forgotten lower was remembered.
Just before Easter Palmetto State Armory had there sale. I couldnt pass up there deal. Bought 2 of there midlength 16 inch kits.
Left one is the DAHMER
In the next few weeks Ill be spending some dough so stay tuned for the transformation.
Thanks again to DAHMER and WEVO
-
14 April 2015, 12:28 #2
Nice, you got one of the few Gen I Dahmer Lowers out there!
-
14 April 2015, 12:38 #3
In the white! Nice!! Looks good
-
14 April 2015, 12:43 #4WEVO Spell Checker
- Join Date
- Sep 2014
- Location
- Florida
- Posts
- 3,198
- Downloads
- 1
- Uploads
- 0
cool congrats
$300 and 10 Pastrami Sandwiches and a case of Diet Coke. ( UWone77)
-
14 April 2015, 12:51 #5
Wow that's a good looking lower, congrats!
Bling Bling!
-
14 April 2015, 15:40 #6Member
- Join Date
- Aug 2010
- Location
- Denver Colorado
- Posts
- 83
- Downloads
- 0
- Uploads
- 0
-
14 April 2015, 16:28 #7
-
14 April 2015, 16:38 #8
-
14 April 2015, 16:40 #9Member
- Join Date
- Aug 2010
- Location
- Denver Colorado
- Posts
- 83
- Downloads
- 0
- Uploads
- 0
Yes, missing... this could of been an early prototype model. I kknow a bunch of people that do outside work for magpul. Everything I got today was free. I cant complain
Last edited by henpecked; 14 April 2015 at 16:47.
-
14 April 2015, 16:50 #10
-
14 April 2015, 16:55 #11Member
- Join Date
- Aug 2010
- Location
- Denver Colorado
- Posts
- 83
- Downloads
- 0
- Uploads
- 0
There is a piece missing from it that has the lugs. There were boxes of items I dug thru. Next time I get over there Ill look through them again for the missing item.
-
14 April 2015, 16:57 #12
Yeah that would piss me off. That's the whole appeal of the bev block is that barrel extension part. For free I guess there's no complaining
-
15 April 2015, 07:36 #13
I would imagine it's nothing but a prototype for checking the injection moulding process. Before they even started casting the steel extension in. Pretty much useless as it is.
-
1 May 2015, 11:35 #14Member
- Join Date
- Aug 2010
- Location
- Denver Colorado
- Posts
- 83
- Downloads
- 0
- Uploads
- 0
A few updates, friend of mine built this upper. Will be trying it out later this month.
Anderson Manufacturing upper receiver with no forward assist or dust cover
MAS Defense barrel, 16", mid gas, 223 Wylde, 1:8 twist, non-chrome lined
ALG Defense 12" EMR M-lok handguard
Aim Surplus Melonite BCG
Standard charging handle
A2 flash hider
Primary Arms 4-14 FFP mil/mil scope with mil-dot reticle
Primary Arms scope mount
Magpul M-lok bipod adapter
Additional details:
The gas block is secured with set screws and is also cross drilled and has an 1/8" roll pin installed. Don't have to worry about it working loose.
The BCG is nitride treated inside and out. No internal chrome plating.