Results 16 to 28 of 28
Thread: PS90 project? Help me out guys
-
14 June 2015, 16:35 #16WEVO Spell Checker
- Join Date
- Sep 2014
- Location
- Florida
- Posts
- 3,198
- Downloads
- 1
- Uploads
- 0
Why not one of this
http://www.57center.com$300 and 10 Pastrami Sandwiches and a case of Diet Coke. ( UWone77)
-
14 June 2015, 16:48 #17
Not for a reloader.
FN hasn't released enough info (last I checked) about the 5.7 round in terms of safe pressure ranges etc so I doubt anyone can load it with 100% confidence in what they're doing. It uses very light bullets like a 22 Hornet (25-40gr) but haven't seen what powders work safely besides a couple Ramshot powders I don't think I've seen on the shelves in years.
Lots of chasing down components to reload a tiny rifle casing. Juice ain't worth the squeeze IMO
-
14 June 2015, 17:53 #18
That could work too...Then I could run a 5.56, a .300 and a 5.7 on an SBR'ed lower...of course I would need to invest in a .30 cal can...
But what has me investigating this round in particular is that suppressed it's about as loud as a suppressed .300 BO. I'm just thinking out loud at this point....
Former11B does have a point that you can reload 5.56 and .300 but 5.7 might prove to be a challenge. You would have to buy commercial ammo from now on.
An upside to sticking with the standard stuff is that... well... it's standard.
At the end of the day the next build (whatever form it comes in) will be a 100 yards and in gun... and I want it to be quiet. the more quiet the better.
-
14 June 2015, 20:00 #19
If like to see you the SBR PS90... and SBR an AR lower. That's really the only correct answer. I really like the PS90, very fun gun.
-
14 June 2015, 20:27 #20
Once I get the suppressor in hand hopefully I can build my bank accounts back up...after that who knows :) But I am planning out and thinking over what it will be...I have a few ideas in mind but over the next few months I am going to have to pick one and go with it.
But if I had the money... you better believe I would have a number of things going on....
I just have to go bit by bit to build things....
-
14 June 2015, 20:36 #21
I know the feeling, I try to do only one project a year. I've still got a little bit to go on my SBR. Hopefully next year it's gonna be either a can or a SCAR 17S.
-
14 June 2015, 20:46 #22
I generally have a taste for the finer things in life... and it's not just guns
I really need to get back in the game though... I like so many others are living on a severely cut budget (I am living on like 1/5th of what I made before)...that said I am doing ok so I shouldn't complain. Gotta keep a good perspective
I could blow a million bucks on guns and ammo with no problem whatsoever. The problem is, I don't have a million bucks LOL
If I ever hit it big I will send my jet for you guys to come to the ranch so we can have a WEVO Weekend down in Texas LOL!
-
15 June 2015, 12:03 #23
The Proguns site has these specs for the PS 90
Caliber: 5.7x28mm
Barrel Length: 16 1/16”
Total Length: 26 1/4”
Weight: 6 lbs., 9 oz.
Magazine Capacity: 10 or 30 rounds
Magazine Type: Horizontal Box Magazine
Blowback Operated, Semi-Automatic
So, if you got a 14.5" barrel (or had the barrel cut and threaded to be 'just a tad' over 16") for pinning the muzzle device for the suppressor, you'd be good to go. Are you sure a 5.56 suppressor will also pass a 5.7 bullet though? I'd definitely check with the suppressor manufacturer just to be on the safe side.
http://www.proguns.com/fnh-ps90.aspFreedom is NEVER Free. We have to work to protect it and even be willing to die to protect it.
-
15 June 2015, 12:05 #24
-
15 June 2015, 17:41 #25
-
15 June 2015, 18:16 #26
-
15 June 2015, 18:19 #27
... a little late to the party but ... I figured you'd like to know.
It is to my knowledge that FN does sell a shorter, SBR-length barrel for the PS90 (11"? it's somewhere around there). The reason why they don't flat out sell the PS90 in SBR configuration is all the associated paperwork; that's what I was told.
-
15 June 2015, 20:16 #28