Results 16 to 26 of 26
Thread: 223 Wylde Pistol Build
-
21 July 2015, 19:43 #16WEVO Spell Checker
- Join Date
- Sep 2014
- Location
- Florida
- Posts
- 3,198
- Downloads
- 1
- Uploads
- 0
-
21 July 2015, 19:47 #17
-
22 July 2015, 02:37 #18
Very nice pile of parts and finished product there jerry, killer pistola!!
I am re thinking ditching my pistol build-over after them pics..would really like to try the shockwave out..
..have you played around with that trigger yet/before? Curious on your opinion..Heard mostly good about it from others around the net, just curious what you thought..
-
22 July 2015, 04:42 #19
Thanks. I have not used one before. Function testing, it seems nice and crisp with a pull right where advertised. I really want to run it and see how it does.
NRA Benefactor Member
NRA Certified Instructor
"I won't be wronged, I won't be insulted, and I won't be laid a hand on."
John Wayne - "The Shootist"
-
25 August 2015, 06:58 #20
That touch of red is a beautiful touch
"Always do more than is required of you"
- General George S. Patton
-
25 August 2015, 07:50 #21
Thank you Sir.
NRA Benefactor Member
NRA Certified Instructor
"I won't be wronged, I won't be insulted, and I won't be laid a hand on."
John Wayne - "The Shootist"
-
29 August 2015, 07:36 #22
I think KAK just sent you the wrong end plate so you might want to give them a call. They sell the "modified end plate" with the alignment tab ground off for the pistol buffer tubes that don't use the castle nut, like their Gen 1 and Gen 2 pistol buffer tubes.
Great looking build.
-
29 August 2015, 11:47 #23NRA Benefactor Member
NRA Certified Instructor
"I won't be wronged, I won't be insulted, and I won't be laid a hand on."
John Wayne - "The Shootist"
-
25 October 2015, 09:21 #24
This shot turned out okay. I converted it to a bitmap image and use it for my computer wallpaper. It's pretty big at 1536 pixels. You may need to click it a couple of times to see it full size.
NRA Benefactor Member
NRA Certified Instructor
"I won't be wronged, I won't be insulted, and I won't be laid a hand on."
John Wayne - "The Shootist"
-
6 December 2015, 12:22 #25
Thank you Sir.
Okay .......... so now I have a couple hundred through the pistol with the Hiperfire FCG. It is their EDT - their entry level (based upon price) fire control group. I installed with the 4.5# spring, and on a Lyman digital trigger pull gauge, it is close enough to not argue with their advertisements. Zero issues with the pistol. It goes bang, positive reset. Like I said, have not put thousands through it yet, but so far I am pleased.
While the price point on the one I selected is below $90 for a complete, drop-in - don't have to remove the selector FCG, I did not pick it based upon price. I wanted to see what their baseline offering would provide.
Even if you are not doing a budget build, I would recommend that you check them out. I like it enough that I ordered their EDT2 from Rainier for the Battle Kitty build.NRA Benefactor Member
NRA Certified Instructor
"I won't be wronged, I won't be insulted, and I won't be laid a hand on."
John Wayne - "The Shootist"
-
6 December 2015, 15:33 #26
Sweet lookin' pistol, Jerry. Nice work!
There's no "Team" in F**K YOU!