Results 16 to 30 of 65
Thread: SBR Discussion-- My Build
-
9 December 2015, 08:16 #16
I've had the BCM stock on my SBR since her creation and so far it's not bad. Still a fan of the B5 stocks. I've been thinking of putting a MFT stock on the 14.5" in place of the UBR to shave some weight of the fat gal. Now as far as barrels my 10.5 is a rainier barrel and it's been flawless so far. My 11.5" build will be a BCM barrel though.
"Always do more than is required of you"
- General George S. Patton
-
9 December 2015, 10:57 #17
I've got a 10½ Aero barrel and have thrown every kind of ammo I can buy locally at it, and not a single hiccup. I'm in the process of dialing in reloads for it, and it is running sweet. I'd say go short! And the MFT stock is great... a 458Socom 10½ upper also uses the same SBR lower, and the stock handles the thumper just fine.
-----------------------------------------------
Jim
"You can never have too many guns" - my wife's actual comment
Alaska Fun
-
9 December 2015, 14:49 #18
10.5 wins :) That's what it's going to be.
I should be getting an invoice probably in the morning for some extra stuff I have going on
I don't want to spoil the fun so once my two hook ups happen I will let yall know the story.
-
9 December 2015, 15:10 #19
My sbr is 10.5" mas defense barrel. Cheap enough that if it doesn't last it's no skin off my back. Runs all ammo I've put through it, but I don't shoot steel case ammo.
-
9 December 2015, 17:04 #20
I'm planning on another Ballistic Advantage 10.3 or 10.5 for my next SBR upper. It'll be used with the Superlative Arms Piston Kit.
-
9 December 2015, 17:07 #21
-
9 December 2015, 17:12 #22
-
9 December 2015, 17:15 #23
Here are my muzzle options... chime in to which one you like better.... I am leaning towards the first or the last of these three. What do you think?
-
10 December 2015, 03:20 #24Member
- Join Date
- Sep 2014
- Location
- Central Ohio
- Posts
- 20
- Downloads
- 0
- Uploads
- 0
I just received a pair of the Tapered Flash Comps from my Black Friday order for both my Carbine and my SBR (as my Recce7 is still in NFA jail).
-
10 December 2015, 05:55 #25
-
10 December 2015, 08:23 #26Contributing Member
- Join Date
- Dec 2012
- Location
- Front Range of CO
- Posts
- 343
- Downloads
- 1
- Uploads
- 0
10.3" BA Hanson Performance with pinned 0.75" gas block, QPQ finish with FailZero extension, 1 in 7 twist, 20 oz.........sale for $171.36 on BA's website.
-
10 December 2015, 14:57 #27
I ordered a ballistic advantage 10.5 barrel, an SLR adjustable block, and a SLR 9.7" rail.
I should have them by monday or tuesday.
My lower is supposed to arrive tomorrow as well.
-
10 December 2015, 19:10 #28
-
10 December 2015, 19:41 #29
I went with the Hammer Comp....
Now I might need some help here....
The only couple parts that I have left to get is a mil spec buffer tube kit... the only thing is I want an end plate that has a QD socket with it.
I also need a pistol grip, probably Magpul.Last edited by alamo5000; 10 December 2015 at 19:45.
-
10 December 2015, 19:51 #30
you could piece a set together and then get the QD socket you want... as far as a grip I like the umbrella or B5 grips but thats something on personal preference and can be easily swapped of course...