Results 61 to 75 of 138
Thread: MEGA Arms Wedge Lock Handguard
-
7 December 2015, 11:59 #61
New Keymod version now available at Rainier Arms.
http://www.rainierarms.com/mega-ar-1...mod-hand-guard
-
7 December 2015, 17:26 #62LEO / MIL
- Join Date
- Mar 2011
- Location
- SLC, UT
- Posts
- 606
- Downloads
- 0
- Uploads
- 0
About damn time.
-
11 January 2016, 08:25 #63
I don't suppose anyone's had a chance to see if a MicroMOA Govnah would fit under there? I talked to Robert, and he said it should; same story with Mega. Still, I'd like final confirmation.
-
19 July 2016, 17:41 #64Member
- Join Date
- Nov 2009
- Posts
- 81
- Downloads
- 0
- Uploads
- 0
Carbine lengths starting to hit the street...
-
24 July 2016, 19:38 #65
18" Mega Billet Upper/Ambi Lower Combo w/16" Wedge Lock Rail M-Lok Handguard
Lower
Mega Arms Billet Ambidextrous Lower Receiver
Mega Arms Rubber Molded Hogue Pistol Grip
Mega Arms Tactical Adjustable Single Stage Trigger
Mega Arms Ambidextrous Bolt Release
Troy Ambidextrous Magazine Release
AXTS Talon Ambidextrous Safety
Strike Industries Lower Parts Kit
Standard A1/A2 Rifle Buffer Tube, Buffer and Spring
Magpul PRS Precision Rifle Stock AR15/M16
Upper
Mega Arms Billet Upper Receiver
Mega Arms Slide Lock Ambidextrous Charging Handle
AXTS Titanium Forward Assist Assembly
Mega Arms 556/223 18” Barrel
Mega Arms AR-15 Wedge Lock Rail M-Lok Handguard 16”
Emtan Karmiel Folding Sight Combo
Precision Armament M11 Severe Duty SPR Muzzle Brake 556/223
Noveske Low Profile Gas Block
Fail Zero Nickel Boron Bolt Carrier Group
Additional Equipment
GG&G Quick Detach Standard XDS Bipod
Badger Ordnance 30mm Cantilever Unimount
U.S. Optics MR10 1.8-10x
-
24 July 2016, 20:44 #66
All I saw was the optic... was there even a Wedgelock in the photo?
-
26 July 2016, 03:12 #67
-
27 July 2016, 20:15 #68Member
- Join Date
- Nov 2009
- Posts
- 81
- Downloads
- 0
- Uploads
- 0
Another shot of mine....
Last edited by jdhill; 29 July 2016 at 14:25.
-
27 July 2016, 21:41 #69
-
28 July 2016, 06:10 #70Senior Member
- Join Date
- Jul 2013
- Location
- Bentonville,AR
- Posts
- 783
- Downloads
- 0
- Uploads
- 0
Having assembled several rifles with Wedgelocks, I must say, I love the things! The engineering and execution is awesome.
-
28 July 2016, 07:49 #71Member
- Join Date
- Nov 2009
- Posts
- 81
- Downloads
- 0
- Uploads
- 0
-
31 July 2016, 21:11 #72
Finally got around to weighing it Jason. It is 12.2 pounds with the optics/mount, bipod and 20 round mag. Not for the feint of heart I suppose but it suits me fine as a DMR rifle. Never intended as a patrol rifle. Every control on it is completely ambidextrous and it is an extremely accurate 556/223 shooter.
-
2 August 2016, 03:47 #73
Damn that is pretty heavy, I'm sure that scope adds a good little chunk, but if just bench/prone shooting it's probably fine..a little heavier then I found of guessed..again nice rig, and matches that nice 308 mega build you have..thumbs up!!
-
2 August 2016, 22:38 #74Senior Member
- Join Date
- Jul 2013
- Location
- Bentonville,AR
- Posts
- 783
- Downloads
- 0
- Uploads
- 0
-
15 September 2016, 21:48 #75New Member
- Join Date
- Feb 2015
- Posts
- 1
- Downloads
- 0
- Uploads
- 0
I'm a huge Mega arms fan, after using several billet receiver sets I believe their machining is unmatched in tolerance between the pieces. I picked up 2 of these for projects and have been disappointed in a few items:
1 handguard Interior dimensions are already very tight, on the top section interior where the gas block would sit there are machined slots that protrude out a few tenth of an inch that makes anything but the smallest gas blocks unattachable due to hitting the top part. I was going to use a superlative arms piston kit and it's a no go.
The alignment pin to the top of the receiver did not align with 2 billet uppers i have one San tan tactical one fortis. Do not know if this piece is only for the mega uppers? Alignment is off by a hundredth of an inch.
Instructions says the use of this pin is not necessary but I would have preferred to use it.
Other than these issues the rail is top notch, just wish i could use a piston system like I originally intended to, which sucks
Sent from my iPhone using Tapatalk