Results 1 to 10 of 10
-
6 August 2016, 17:47 #1Senior Member
- Join Date
- Apr 2014
- Posts
- 534
- Downloads
- 0
- Uploads
- 0
Is anyone following this mk36 H prototype?
Seems like it's a m1a upper mated with a ar10 style lower. I'm pretty interested to see where this heads.
-
6 August 2016, 17:47 #2Senior Member
- Join Date
- Apr 2014
- Posts
- 534
- Downloads
- 0
- Uploads
- 0
-
7 August 2016, 14:50 #3
-
7 August 2016, 17:12 #4Senior Member
- Join Date
- Apr 2014
- Posts
- 534
- Downloads
- 0
- Uploads
- 0
-
7 August 2016, 18:11 #5
I like everything about the drawing other than where the "upper" mates just in front of the stock. Fix that and I'll love it (as a concept).
Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
8 August 2016, 08:45 #6Senior Member
- Join Date
- Apr 2014
- Posts
- 534
- Downloads
- 0
- Uploads
- 0
That part is a little weird. I was also looking forward to the continuous upper rail which doesn't seem to have made it
-
8 August 2016, 10:00 #7
I am going to assume it's still in design to keep that feature. Otherwise, it'll be a failure.
Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
8 August 2016, 12:04 #8Senior Member
- Join Date
- Apr 2014
- Posts
- 534
- Downloads
- 0
- Uploads
- 0
I just assumed it'll be part of the handguard like any AR15. I didn't get that idea from the drawing you posted though.
-
11 August 2016, 19:50 #9
But why though? If you're going to try that hard to emmulate an AR-15, why not just go the AR-10 route.
Granted I'm not going to lie, being the Garand snob I am, that's kinda cool.
But still, if I were going to get an M1A and "modernize" it, I'd probably throw it in a EBR chassis.
-
12 August 2016, 05:43 #10
Still won't be as accurate as an AR10.
I appreciate the effort in trying new things, but is the juice worth the squeeze in this instance?