Results 1,546 to 1,560 of 2420
Thread: NFA Picture Thread
-
10 March 2017, 14:08 #1546
-
11 March 2017, 13:37 #1547
Saker K
-
17 March 2017, 16:42 #1548
Recce complete with the new Ultra Match barrel
-
19 March 2017, 11:00 #1549
-
19 March 2017, 11:06 #1550
-
19 March 2017, 11:45 #1551Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
19 March 2017, 16:41 #1552
My beater HD rifle
-
19 March 2017, 17:07 #1553
-
19 March 2017, 17:15 #1554
-
19 March 2017, 17:23 #1555
Both the Trifecta MAAD and Key-mo are simple to operate. Drop the suppressor over the mount. Twist until it stops turning. Done.
As for the internal workings, the Trifecta and Key-mo are similar in that they are compression mounts, pulling the suppressor against a tapered surface on the muzzle device, but otherwise are very different mechanically.
The Trifecta is rather complex with three locking teeth that cam in behind the muzzle device, pins, inner and outer sleeves, and a couple springs. It's not user serviceable.
The Key-mo has 2 parts and a spring, and can be disassembled by hand while installed on your suppressor.
I went through three Trifectas and they all got stuck, all the time. My Key-mo has never gotten stuck. ASR is OK as long as the ASR spring is tuned properly and you pay attention to locking/unlocking it.Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
25 March 2017, 17:17 #1556
DD RIS II FDB Cutout
-
25 March 2017, 17:35 #1557
Elcan, Mawl, suppressor. You have more invested in attachments than the rifle. How's the weight of that thing feel?
The best way to survive a violent encounter is to be the one inflicting the most violence.
-
25 March 2017, 17:38 #1558
-
28 March 2017, 05:46 #1559
-
28 March 2017, 15:19 #1560
Even with a plate carrier/vest, you must have small hands and smell of cabbage. I have mine hanging off the end and I still can't extend my stock all the way out (albeit with a 4-position).