Results 31 to 45 of 89
Thread: CMT 308 is Ready
-
20 June 2017, 03:08 #31Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
20 June 2017, 11:00 #32"And now you understand. Anything goes wrong, anything at all... your fault, my fault, nobody's fault... it won't matter - I'm gonna blow your head off. No matter what else happens, no matter who gets killed I'm gonna blow your head off." -Big Jake
"All the Gods, all the heavens, all the hells, are within you." -Joseph Campbell
Instagram- @tomcheaney9
-
20 June 2017, 11:05 #33Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
21 June 2017, 03:51 #34
Right on , just didn't see it listed.
Probably just fine, first time out, maybe some weak ammo , lube it up and shoot it...
-
21 June 2017, 03:56 #35
Sounds overgassed to me, too. You want an A5 length receiver extension (which it sounds like you have), rifle length spring, and most likely an H3 buffer.
Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
21 June 2017, 04:03 #36Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
21 June 2017, 04:17 #37
I ran that setup initially, as well, and it wasn't anywhere near enough. The A5 helped a little, but was still a band-aid fix.
Sorry for continuing to be a Debbie-Downer, I know you need to go shoot it some more before diagnosing anything. For me, I'm generally interested if I got a lemon or if yours indicates that's just how they're built.
-
21 June 2017, 04:25 #38Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
21 June 2017, 06:16 #39
A car10 buffer is an H3 cut down in length and drops a tungsten weight, so it's lighter than an H2. Way too light for a 308, unless it's one of Slash's.
I would definitely switch out the extension to an A5 length and use an H3 (not A5H3) with an armalite ea1095 spring. The one photo of ejection shows the bolt going forward before the case has barely cleared the port. It's cycling way too fast.Last edited by Slippers; 21 June 2017 at 06:31.
Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
21 June 2017, 07:00 #40
Slippers, which A5 receiver do you recommend. I was going to go with a Vltor branded one but there's two different ones the re-10A5-SR and the just plain A5 receiver extension. Or do you have another recommendation?
-
21 June 2017, 07:30 #41Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
21 June 2017, 08:21 #42
And they're available, so get the BCM A5 with the Armalite Spring (part #EA1095) and an H3 buffer... Or I've seen Springco red spring... Or would you recommend Slashs buffer? Sorry trying to compile all info in one post. I researched and couldnt find a simple, well informed post with everything
-
21 June 2017, 08:34 #43Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
21 June 2017, 08:39 #44Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
21 June 2017, 08:41 #45